Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Loganville
Chimney repair in Loganville, GA typically runs $350 – $1,800 for masonry work like crown rebuilding and mortar repointing, and $1,200 – $4,500 for flue relining, depending on what the camera inspection actually finds. Most Loganville repairs are done in a single visit once materials are on hand. If you’re seeing water stains on the firebox ceiling, crumbling mortar joints, or spalling brick on the stack, call Flint Chimney Sweep at (830) 251-4560 and we’ll give you a written price before any tool leaves the truck.
We work the Gwinnett County side of Loganville constantly, from Bay Creek up through the subdivisions off Highway 78, and we know what these chimneys do after twenty or thirty years on Piedmont clay. Our crews arrive in uniform, background-checked, with a camera we run before quoting any repair. That’s the Garrison Standard: price in writing, scope in writing, and a full-year guarantee on every repair we make.
Why Flint Chimney Sweep Is Loganville’s Preferred Chimney Repair Company
Flint Chimney Sweep has been part of the Garrison Partners family since 2002, and our Loganville customers keep us busy with crown repairs, flashing resets, and masonry work on homes built during the big 1990s and 2000s subdivision boom here. We run every Loganville repair call the same way: inspect first, document with the camera, then write up the price before any work starts. No handshake estimates, no price moves at the door.
The owner, Hank Delano, set the standard for how we work in Loganville and everywhere else we dispatch: the written guarantee is not a selling point, it’s a condition of the job. Every repair carries the 365-Day Done Right Promise. If a covered repair fails within one year, we return at no charge. That’s not a courtesy call, that’s the contract.
Response time to Loganville runs on schedules, not mood. Dispatch is coordinated from our Atlanta office, and crews serve Loganville locally, so you’re not waiting on someone to drive across three counties. We quote lead times honestly when you call, and we honor them.
What Loganville homeowners tell us they like most: we answer the phone with a live person, 24/7, and we leave the job site clean. You’ll recognize the tech who shows up because we tell you who’s coming. That matters when you’ve been burned before by a no-show or a contractor who quoted one number and invoiced another.
Chimney Repair Companies in Loganville
Chimney repair companies work across the whole stack: the crown at the top, the flashing where the chimney meets the roof, the masonry joints in the brickwork, and the flue liner inside. In Loganville, most repair calls start with water, not fire. Crowns crack, flashing lifts, mortar erodes, and then every rainstorm pushes water into the smoke chamber. What gets misdiagnosed as a “liner failure” is often just a crown and flashing job.
Written Price Before Work Starts
Every Loganville repair job gets a written price before any work begins. That includes the scope of work, the materials we’re using, and the total you approved. If the invoice doesn’t match the approved number, don’t pay it. That’s the entire point of putting it in writing first.
Camera Inspection Before Any Recommendation
We don’t tell you what’s wrong from the ground. We run a camera up the flue, show you the photos, and explain what needs fixing now versus what can wait. No Loganville homeowner should approve a liner replacement or rebuild without seeing the damage themselves.
Chimney Masonry Repair in Loganville
Chimney masonry repair in Loganville covers the brick-and-mortar work that holds the stack together: repointing crumbled mortar joints, rebuilding spalling brick at the crown and shoulders, tuckpointing weather-worn walls, and waterproofing the whole structure against Gwinnett County rain. Prices here run $350 – $1,200 for typical repointing and tuckpointing, and $800 – $2,400 for partial rebuilding when brick has spalled beyond repair.
Crown Rebuilding and Waterproofing
The crown is the concrete cap at the top of the chimney, and on north-facing stacks in Loganville it takes a beating from freeze-thaw cycles every winter. A cracked crown lets water into the masonry, and that water freezes, expands, and pushes mortar joints apart. We rebuild crowns with proper overhang and add a waterproofing treatment so the repair holds.
Flashing Reset and Brick Repair
Flashing is the metal that seals the roof-to-chimney junction. When it lifts or corrodes, water runs down the firebox wall. We reset or replace flashing with Copperfield materials, then repair any brick or mortar damage behind it. You won’t need to touch it again for years, and if something fails inside the guarantee window, we come back free.
Trusted Brands We Service in Loganville
We stock and install professional-grade chimney materials so Loganville customers are not waiting on special orders for common repairs. That includes DuraFlex liners for relining jobs, HeatShield for targeted flue repairs when a full reline isn’t necessary, and Famco cap and crown components for masonry work. We specify the right brand for the job, not the one with the highest margin, and the photo report we hand over after every repair shows exactly which materials went in.
Common Chimney Repair Problems We See in Loganville Homes
- Cracked crowns from clay soil movement. Loganville sits on Gwinnett County’s Piedmont clay, which shrinks in dry spells and swells after heavy rain. Homes built on former farmland in the 1990s and 2000s sit on slabs that still move with that cycle, and chimney crowns and mortar joints crack first because they’re the most exposed masonry on the house. We inspect the crown, flashing, and joints before anything else on a Loganville repair call.
- Water staining on the firebox ceiling. That’s usually a flashing or crown problem, not a liner failure. We had a repair in Bay Creek where the camera run showed a hairline crack at the smoke chamber and a spalling crown letting water in at the cap. We rebuilt the crown, reset the flashing, and installed a HeatShield liner repair instead of replacing the whole flue, then showed the homeowner the before-and-after photos.
- Second-degree creosote glazing on wood-burning flues. A standard brush pass reads “clean” but leaves a hard, shiny glaze baked onto the liner. We see it in Loganville fireplaces that get burned hot and then choked down for the night. That glaze is a chimney fire waiting to happen, and it doesn’t come off with a brush; it requires mechanical removal and often a chemical treatment.
- Spalling brick at the crown and shoulders. Freeze-thaw on north-facing stacks pops the face off bricks over time, and homeowners write it off as cosmetic. A Level 2 inspection usually finds soft mortar behind that spalling, which means the brickwork is losing its bond. That’s a structural repair, and it’s cheaper to catch before the stack starts leaning.
Pricing for Chimney Repair in Loganville, GA
Here are the ranges we quote for Loganville work, based on what we find on camera. Standard mortar repointing and tuckpointing runs $350 – $1,200 depending on how many joints need work. Crown rebuilding with waterproofing runs $600 – $1,800. Flashing replacement runs $400 – $1,100. Flue relining with DuraFlex runs $1,200 – $4,500, and a HeatShield targeted repair runs $450 – $1,500 when a full reline isn’t needed. The number that matters is the one on your written quote, and you’ll have it before we start. Call (830) 251-4560 for a free estimate, and we’ll put the price in writing.
We Also Serve Cities Near Loganville
Our Loganville crews also cover Loganville‘s surrounding Gwinnett and Walton County communities, including Grayson, Dacula, Snellville, and Buford. If you’re just outside city limits, call and ask if your address is in our service area. For the full scope of what we fix, see our Chimney Repair service page.
Serving Loganville, GA - Our Local Coverage Area
We’re based in the Loganville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Loganville
If you see water stains on the firebox ceiling, crumbling mortar on the ground, white staining on the brick, or spalling (flaking brick faces), it’s a repair issue, not a cleaning issue, and you need a camera inspection to confirm what’s going on. A cleaning addresses creosote buildup. A repair addresses what’s letting water in or weakening the structure. In Loganville we find a lot of crown and flashing cracks from Piedmont clay movement, and those have nothing to do with how dirty the flue is. Call (830) 251-4560 and we’ll tell you what the camera shows before recommending anything.
Homes built in the 1990s and 2000s subdivisions around Loganville are now hitting the age where crowns crack, flashing lifts, and mortar joints fail, especially if the chimney has never been waterproofed. That’s not a design flaw; it’s what happens when masonry sits on Piedmont clay that expands and contracts with every wet-dry cycle. If your home is 20-30 years old and you’ve never had a Level 2 inspection, it’s worth one just to know where you stand, and we’ll tell you plainly if the chimney can wait a few seasons.
No, and you should not trust any company that does. A phone diagnosis is a guess, and guesses have a way of turning into liner replacements you didn’t need. We run a camera up the flue, show you the photos, and then give you a written price. That’s the Garrison Standard, and it applies to every Loganville repair call we make.
Second-degree creosote is a hard, tar-like glaze that a standard brush won’t remove; it’s the leading cause of chimney fires in wood-burning fireplaces. Third-degree is worse, a thick, hardened layer that sometimes requires a rotary chain or chemical treatment to break down. When we find either during a repair visit in Loganville, we include removal in the written scope and document it in the photo report, because leaving glaze on the liner while repairing the masonry is half a job.
Surface mortar hairline cracks on a chimney that’s not used and not showing water intrusion can usually wait until your next scheduled inspection. You shouldn’t wait if water is actively staining the firebox or ceiling, if brick is spalling and losing its bond, if the flue liner is cracked, or if you’re burning wood with any creosote glaze present. Those are fire and structural risks, not cosmetic ones, and the repair only gets more expensive the longer it sits. Call (830) 251-4560 and we’ll give you a straight answer after the camera run, along with a written price.
Call Flint Chimney Sweep for Chimney Repair in Loganville, GA
If you’ve got water where it shouldn’t be, brick that’s losing its face, or a chimney that hasn’t been inspected in five years, call Flint Chimney Sweep at (830) 251-4560. We’ll schedule a visit, run the camera, hand you the photo report, and put the repair price in writing before any work starts. Every Loganville repair carries the 365-Day Done Right Promise, and the phone is answered by a live person 24 hours a day, seven days a week.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Loganville, GA with written pricing, camera-documented inspections, and a full-year guarantee on every repair.