Chimney Repair in Malvern - Inspected on Camera, Then Priced in Writing

Fast, Reliable Chimney Repair Across Malvern

Chimney repair in Malvern, PA typically runs $275 – $1,900 depending on the job, from mortar repointing on a crumbling crown to a full flue relining. Most repairs are done in one visit with a written price agreed before any work starts. If you’re seeing water stains on the ceiling near the chimney, white residue on the brick, or a damper that won’t seal, call Flint Chimney Sweep at (830) 251-4560 and we’ll send a background-checked technician who works on a flat, documented scope.

Call (830) 251-4560

Malvern sits on the western edge of the Great Valley, and the housing stock here ranges from 1960s split-levels off King Road to stone colonials near Paoli Pike and newer builds south of Route 30. That mix matters. Different chimneys fail differently, and a crew that knows Great Valley construction patterns spots problems faster than one that treats every flue the same. We dispatch from our Philadelphia office and crews serve Malvern on a regular route, so scheduling is straightforward and our arrival window is reliable.

Key takeaways:

• Every repair in Malvern gets a written price before work begins, not after we open the chimney.
• All repairs carry a 365-Day Done Right Promise in writing, valid for a full year.
• We use camera inspection on every repair call so you see the actual problem, not a verbal diagnosis.
• Our phone is answered by a live person around the clock at (830) 251-4560.

Why Flint Chimney Sweep Is Malvern’s Preferred Chimney Repair Company

We’ve been operating since 2002 as part of the Garrison Partners family of independently owned chimney service companies, and Malvern homeowners keep calling us back for one reason: the price we quote is the price you pay. No ladder-side upcharges, no phone call two hours later saying the job “grew.” Every repair is documented with a written guarantee that lasts a full year from the service date. If a covered repair fails inside that window, we return at no charge. No argument.

Malvern customers deal with the same thing year after year: chimney companies that no-show, move the number at the door, or leave mortar dust across the living room floor. Our technicians wear uniforms, pass background checks, and show up inside the window we give. The Garrison Standard, the code every Garrison Partners location follows, means the scope, price, and guarantee are all put on paper before a single tool comes off the truck.

Hank Delano, who leads Flint Chimney Sweep, doesn’t run crews that guess. When our tech pulls a camera through a flue on a Malvern job, you get a photo report showing exactly what’s wrong and what we fixed. If the fix can wait, we say so in writing.

Chimney Liner Installation in Malvern

Chimney liner installation in Malvern is a job we handle frequently, especially in older homes where the original clay tile liner has cracked from decades of freeze-thaw cycles. A flue relining means replacing the inner liner that channels smoke and combustion gases safely out of the house. When the liner fails, exhaust can leak into the wall cavities, and that’s a carbon monoxide risk, not a cosmetic issue. Depending on the liner length and material, Malvern homeowners should expect $1,000 – $1,900 for a full relining job, and we’ll always tell you exactly which material we’re quoting before you commit.

On a stone colonial off Paoli Pike, our tech pulled a squirrel’s nest from the flue, confirmed first-degree creosote and a warped damper with the camera, then installed a Gelco stainless liner and a new Famco cap while fixing cracked flashing. We left the homeowner with a photo report showing the before/after and a written note that the crown could wait a year. That’s the process, every time.

Stainless Liners for Older Flues

Most Malvern chimneys built before the 1990s have clay tile liners that crack when water gets in and freezes. Stainless steel replacements, like the DuraFlex liners we install, handle heat and moisture better. We measure, cut, and insulate to the exact flue dimensions on site.

What a Liner Replacement Actually Involves

We camera the entire flue first, then remove the old liner if there is one, and size the new liner to the appliance or fireplace. The crew sets the liner, connects it at the top with a proper cap, and seals the crown. You get photos before and after, plus the written guarantee.

Chimney Flashing Repair in Malvern

Chimney flashing repair in Malvern is the most common call we get after a heavy rain. Flashing is the metal barrier where the chimney meets the roofline, and when it fails, water tracks into the attic or down the firebox wall. On the Great Valley’s wooded, hillier lots, wind-driven rain pushes harder against chimney flashing than it does on flat suburban streets, so we see more step-flashing failures and corroded counter-flashing here than in the densely built boroughs to the east. Expect to pay $450 – $850 for a typical flashing repair on a Malvern single-family home.

Replacing vs. Patching Flashing

A patch might buy a season, but on older Malvern chimneys with multiple layers of tar and caulk already applied, replacement is usually the honest fix. We remove the old metal, inspect the surrounding roof deck, then install new copper or aluminum flashing sealed correctly.

Water Entry Beyond the Flashing

Flashing failure often shows up alongside crown damage. Before we quote flashing work, we check the crown, the mortar joints, and the brick face so you’re not paying for a flashing fix when the real leak is the crown. That camera and visual check is included in every repair quote.

Trusted Brands We Service in Malvern

We work with professional-grade chimney materials chosen by the job, not by margin. That means HeatShield resurfacing systems for smoke chamber issues, DuraFlex stainless liners for relining, and Copperfield components when replacement parts are needed. We carry common parts in our service vehicles serving Malvern, so repairs don’t stall waiting on an order. Whether it’s a Famco cap going on a Paoli Pike home or HeatShield in a Lionville split-level, we use materials that hold up in Chester County weather and that you can verify for quality independently. Our role is straightforward: we spec the product, show you the price, and install it properly.

Common Chimney Repair Problems We See in Malvern Homes

• Third-degree creosote glaze in the smoke chamber: Older Malvern homes that burn regularly build up a hard, shiny creosote that a routine brush sweep won’t remove. It’s flammable and sits exactly where a chimney fire starts. We remove it with mechanical or chemical treatment and document the before/after with the camera.
• Spalling crown and failed flashing from freeze-thaw: The Great Valley’s wooded, hillier lots get more temperature swings against exposed chimneys, and brick faces absorb water that expands when it freezes. Spalled brick and cracked crowns are normal here. We repoint mortar, rebuild crowns, and waterproof the brick so water stays out.
• Nest debris and cracked flue tiles: Squirrels and birds get past old caps and build nests that restrict draft. A restricted flue doesn’t just smoke up the living room; it can push carbon monoxide back into the house. We see this most often on chimneys near tree lines, which describes a lot of Malvern properties.
• Failed damper assemblies: Warped or rusted dampers mean heat escapes all winter and sometimes odors come down. Replacing a damper is a small job, but it changes the whole feel of a room. We’ll show you the rusted one before we swap it.

Pricing for Chimney Repair in Malvern, PA

We Also Serve Cities Near Malvern

Flint Chimney Sweep serves the entire western Main Line and Chester County area. We work regularly in Malvern, Paoli, Lionville, West Chester, and Phoenixville. If you’re in one of those communities and need a Chimney Repair crew that puts the scope in writing before starting, call us at (830) 251-4560.

FAQs About Chimney Repair in Malvern