Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Ontario
Repairing a chimney in Ontario, CA typically runs $180 to $2,400 depending on what’s actually wrong, and the most common failures we see here aren’t firebox damage at all. They’re sun-baked crowns, spalled brick, and water getting in where it shouldn’t. Ontario’s hot, dry summers and cool winter nights cycle moisture through mortar joints every single year. That’s why a chimney inspection here starts on the roof, not in the firebox. If you’re seeing cracked masonry or water stains near the flue, call (830) 251-4560. We’ll give you a written price before any work begins, and every repair carries our 365-Day Done Right Promise in writing.
Why Flint Chimney Sweep Is Ontario’s Preferred Chimney Repair Company
Flint Chimney Sweep has been in business since 2002 as part of the Garrison Partners family of independently owned chimney service companies. Hank Delano leads our crew, and the standard he set is simple: written pricing, background-checked technicians, and a guarantee you can hold in your hand. Ontario homeowners tell us the same story across the board. They’ve had companies no-show, quote one price over the phone and a different one at the door, or recommend work without showing them any proof. We don’t operate that way.
Every repair we do in Ontario starts with a written price delivered before a tool comes off the truck. The number you approve is the number on the invoice. Our technicians arrive in uniform, on the window we gave, and they carry professional-grade materials: DuraFlex liners, Gelco caps, HeatShield repair products. If a covered repair fails within one full year, we return at no charge. That’s the Garrison Standard, and it applies to every job on every street in Ontario, from the ranch houses near Euclid Avenue to the newer builds north of the 10.
Chimney Masonry Repair in Ontario
Chimney Masonry Repair in Ontario means addressing the damage that our climate causes first: cracked crowns, spalled brick faces, and mortar joints that have turned to sand. We see this more than creosote buildup here. The inland basin heat bakes the masonry all summer, and when winter nights drop into the 40s, the trapped moisture expands and contracts. One season of that cycle can crack a crown. Two or three, and brick faces start popping off. The repair call starts on the roof, not in front of the fireplace.
Crown Repair and Mortar Repointing
A cracked chimney crown lets water into the smoke chamber, where it rusts the damper assembly and keeps going. We remove the failed crown, pour a new one with a proper overhang and drip edge, and repoint the mortar joints with a mix that can handle Ontario’s temperature swings. This work usually runs $450 to $1,200. If the crown crack is caught the first season, the repair is straightforward. Wait a year and you’re often looking at partial rebuilding, which is a different price category entirely.
Spalling Brick and Partial Rebuilding
Spalling brick is when the brick face flakes or pops off, and Ontario’s older single-story homes are full of it. We cut out the damaged brick, salvage what’s still structurally sound, and rebuild courses with new mortar. A partial rebuild typically runs $800 to $2,400 depending on how many courses we’re replacing and how high the chimney sits. Every repair gets a written guarantee valid for a full year. If it fails within that period, we come back free of charge.
Chimney Cap Installation in Ontario
Chimney Cap Installation in Ontario matters more than most homeowners assume, because a missing or undersized cap is often the reason a chimney is failing in the first place. We install stainless caps from Gelco, Famco, and Olympia Chimney, sized to the flue and matched to the chimney’s profile. The cap keeps rain out, keeps animals out, and does something else that matters specifically here: it controls draft in Ontario’s hot, still afternoons. A properly sized cap creates a stable pressure difference. A missing one lets hot air dump back down the flue.
When a New Cap Fixes the Actual Problem
We get calls from Ontario homeowners who say the fireplace won’t draw on warm afternoons, and someone told them the flue needs a cleaning. Half the time, the flue is fine. The cap is missing or too short, and hot exterior air is pushing smoke back into the house. We run a camera inspection to confirm the flue condition, then install the correct cap. A standard stainless cap with installation typically runs $180 to $450. No cleaning charge when you don’t need a cleaning.
Protecting the Crown and Damper
A neglected cap lets water straight into the flue, where it rusts the damper and tracks down into the smoke chamber. By the time you see the stain on the ceiling, the rust has been working for months. Our tech was called to a single-story ranch off Euclid Avenue where the owner had never used the fireplace and was sure the chimney needed nothing. A Level 2 inspection showed a hairline crack across the chimney crown with water tracking down to rust the damper. We removed the failed crown, poured a new one with an overhang, rebuilt two courses of spalled brick, and installed a Gelco stainless cap. The customer got before and after photos of everything.
Trusted Brands We Service in Ontario
We work with professional-grade chimney materials, and we stock parts for Ontario customers so the turnaround isn’t held up by a distributor. When a repair calls for a new liner, we install DuraFlex. When a cap is the issue, we use Gelco, Famco, or Olympia Chimney depending on the flue profile and the home’s roofline. HeatShield is our repair product for deteriorated flue interiors where a full reline isn’t necessary. Copperfield components come into play for certain fireplace and damper repairs. You don’t need to know which one your chimney needs before calling. That’s our job. You’ll see the brand name on the written estimate, and you can verify it independently.
Common Chimney Repair Problems We See in Ontario Homes
- Cracked crowns from summer heat cycling. Ontario’s inland-basin sun bakes chimney crowns all day, and the cool desert nights contract the same masonry. One or two seasons of that cycle is enough to open a hairline crack that lets water in.
- Spalling brick on older ranch homes. Homes built in the 1960s and 70s across Ontario’s established neighborhoods have brick that predates modern moisture-resistant mortar mixes. The faces pop off, and unless the courses are rebuilt, the damage spreads downward.
- Draft problems traced to caps, not soot. On hot, still afternoons, a missing or too-short chimney cap causes smoke to stall or back up. This gets misdiagnosed as a dirty flue. A camera inspection shows the truth in five minutes.
- DuraFlex liner damage found too late. Without a Level 2 camera inspection before the estimate, liner cracks and separations go unnoticed until the chimney is actively leaking into the house. We photograph the liner before we write any repair recommendation.
Pricing for Chimney Repair in Ontario, CA
We Also Serve Cities Near Ontario
Our crews handle Chimney Repair across the western Inland Empire, and we run the same written-price, written-guarantee standard on every job. If you’re in Montclair, Claremont, Upland, or Rancho Cucamonga, you’re still on our schedule within the same week in most cases. Dispatch and scheduling are coordinated from our Inland Empire office, and the same background-checked Ontario crew serves the surrounding cities.
Serving Ontario, CA - Our Local Coverage Area
We’re based in the Ontario area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Ontario
How often does a chimney in Ontario, CA really need to be inspected?
Once a year, even if you never use the fireplace. Ontario’s climate attacks the chimney from the outside, not the inside. Cracked crowns and spalled mortar develop whether or not you light a fire, and the only way to catch them before the damage spreads is an annual inspection. Call (830) 251-4560 to schedule one. The inspection includes a written report with photos.
My fireplace is unused – can chimney repair in Ontario wait?
No, and this is the most common misconception we hear across Ontario. An unused fireplace means the chimney is still exposed to sun, rain, and wind every day. An unused chimney with a cracked crown is quietly rusting its damper and letting water into the smoke chamber. This is the exact scenario where people call us with a thousand-dollar repair that could have been a $450 crown fix two years earlier. The repair can’t wait just because the fireplace is idle.
What does a proper chimney inspection actually include, and what does it cost?
A Level 2 inspection includes a camera run down the full length of the flue, a roof-level check of the crown, cap, and flashing, and an interior check of the damper and firebox. We photograph everything and walk you through the images before recommending any work. In Ontario, a Level 2 inspection typically runs $250 to $400, and if we’re already out for a repair, the inspection is rolled into the written estimate. You’ll see exactly what we see.
Do you service DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield products in Ontario?
Yes. We install and work with all six of those brands, and the one your chimney needs depends on the specific failure. DuraFlex for relining, Gelco and Olympia Chimney for caps, Famco for certain cap and vent components, HeatShield for interior flue repair, Copperfield for specific fireplace and damper repairs. The brand is named on your written estimate, and you can verify it before any work starts.
Can you tell me the difference between first-, second-, and third-degree creosote on my flue?
First-degree creosote is a fine, brushable soot that sweeps out cleanly. Second-degree is a baked-on flaky deposit that takes more mechanical work. Third-degree is a hardened, glossy glaze that bonds to the flue wall and cannot be safely removed with a standard sweep. In Ontario, we see third-degree glazing most often in fireplaces that get hot, fast burns on cold winter nights and then sit for the rest of the year. If you’re not sure what’s on your flue, call (830) 251-4560. The camera inspection answers it in minutes.
Call Flint Chimney Sweep for Your Ontario Chimney Repair
You’ll get a straight answer, a written price, and a repair that’s guaranteed for a full year. We don’t recommend work without showing you the camera photos, and we don’t write a number without standing behind it. Hank Delano and our Ontario crew operate under the Garrison Standard: the price you approve is the price you pay, and the guarantee you’re given is the one we honor. Call (830) 251-4560 to schedule a free estimate for chimney repair in Ontario. A live person answers, 24/7.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Ontario and the western Inland Empire since 2002.





Before
After
Before
After
Before
After