Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Placerville
Chimney repair in Placerville comes down to two things: catching crown and flashing damage before water gets into the smoke chamber, and sweeping creosote before it glazes over. A standard chimney repair job in Placerville typically runs $180 – $340 for mortar and flashing work, while a full flue relining with DuraFlex lands between $2,500 and $6,500 depending on the liner length and access. We schedule by appointment, show up inside the window we give you, and put the price in writing before a single tool comes off the truck. Call (830) 251-4560 and you’ll get a live person, not a voicemail tree.
Why Flint Chimney Sweep Is Placerville’s Preferred Chimney Repair Company
Flint Chimney Sweep has been part of the Garrison Partners family since 2002, and the way we run a repair call in Placerville is the same way every Garrison Partners location runs it: document the scope, agree on a written price, do the work, and hand you a guarantee that lasts a full year. Homeowners off Bucks Bar Road, Cedar Ravine Road, and throughout the Diamond Springs corridor tell us the same thing about past chimney companies: the crew showed up late, the price moved, or the mess stayed. We work against that by sending background-checked, uniformed technicians on every call and by answering the phone with a real person around the clock.
We do not have a Placerville storefront with a street address you can walk into. Dispatch and scheduling run through our Sacramento office, and our crews serve the Placerville area on a regular rotation. What that means for you is a set appointment window, not a “sometime this week” promise. When our tech arrives at a home near Schnell School Road or up toward the Placerville Airport, they know what to look for before they knock: crown hairline cracks, flashing separation at the roofline, and creosote buildup from Sierra foothill oak. Call (830) 251-4560 to get on the schedule.
Chimney Liner Installation in Placerville
Chimney Liner Installation in Placerville means replacing the inner channel that carries combustion gas and smoke out of your house, either because the original clay tile liner has cracked or because the chimney was built without one. In Placerville’s gold-country foothill climate, the freeze-thaw swing between hot afternoon sun and hard overnight freezes puts lateral stress on clay liners. Once a tile cracks, the gap lets heat and gases reach the brick structure around it. That is how a small crack becomes a chimney fire waiting for the right creosote buildup.
What the Work Involves
We camera-inspect the flue first. You see the footage. If the liner needs replacement, we typically pull a stainless DuraFlex liner through the existing flue, insulate it where code requires, and connect it to the appliance and crown. The material is named on your written quote: DuraFlex, HeatShield, or Gelco depending on the flue geometry. In Placerville, a standard single-story ranch with a straight flue will run between $2,500 and $4,500. A two-story home with an offset flue and climbing access runs closer to $4,000 to $6,500. You get the final number in writing before we start.
Signs You Need a Liner
Flue tile fragments in the firebox are the clearest sign. So is visible cracking on the chimney exterior that lines up with the flue path, a smokey smell after the fire is out, or white staining on the brick. None of these warrant a panic call, but all of them mean you should schedule an inspection. A cracked liner with clean flue walls can sometimes wait a season. A cracked liner with third-degree creosote behind it is a repair we tell you to make before the next fire.
Chimney Flashing Repair in Placerville
Chimney Flashing Repair in Placerville addresses the sheet metal junction where the chimney meets the roofline. This is the single most common repair call we get from Placerville homeowners, because the freeze-thaw cycle here does something specific: hairline cracks open in the crown mortar, water seeps down behind the flashing, then a cold snap freezes that trapped water and pushes the flashing loose from the brick. Once flashing separates, rain and snowmelt run straight into the attic and down the chimney chase. On a 1950s ranch house off Cedar Ravine Road, our tech found exactly that sequence: a rusted-through chimney cap, a spalled crown shedding mortar onto the flashing, and glazed third-degree creosote at the top of the flue. The draft was weak and the damper barely seated. We fit a new stainless cap, rebuilt the crown, and lined the flue with DuraFlex, then sent the homeowner a photo report of every stage before we left.
Flashing Repair Scope and Cost
Flashing repair in Placerville typically runs $450 to $1,200 depending on how many sides of the chimney need reworking and whether the roofer’s flashing is step flashing, counter flashing, or both. We use Famco and Olympia Chimney flashing components where the roofline geometry requires a custom profile, and seal everything with a polyurethane sealant rated for the temperature swings we see in El Dorado County. The flat price covers removal of the damaged metal, prep, installation, and a written one-year guarantee on the repair.
When Flashing Can Wait
Not all flashing damage needs work this week. Surface rust on flashing that is still seated tight against the brick can wait until the next inspection. What cannot wait is any gap you can see between the flashing and the brick face, any water staining on the ceiling near the chimney, or shingle damage around the chimney footprint. Those are active leaks. A camera inspection takes about the same time as a sweep and gives you a yes or no answer without guesswork.
Trusted Brands We Service in Placerville
We stock and install professional-grade chimney products from HeatShield, Gelco, Olympia Chimney, and Famco, among others. What that means in Placerville is this: when a liner or flashing component fails under warranty, we can usually pull the replacement from our regional supply run rather than ordering special and making you wait. The brand names go on your written quote. You can look up the product yourself before we start. If a covered repair fails within one full year of the service date, we return at no charge. That is the 365-Day Done Right Promise, and it applies to every Chimney Repair job we do in Placerville and the surrounding foothill communities.
Common Chimney Repair Problems We See in Placerville Homes
- Crown and flashing hairline cracks from freeze-thaw. The temperature swing between 100°F summer afternoons and freezing winter nights in Placerville works mortar joints loose. Hairline cracks open in the crown, water gets into the smoke chamber, and the damper rusts in place. Our Chimney Repair team rebuilds crowns and replaces rusted dampers regularly across the foothills.
- Glazed third-degree creosote from Sierra foothill oak and pine. The local oak and pine burn hot and dirty. First-degree creosote brushes off easily. Left alone through a winter or two, it hardens into a tar-like glaze a brush cannot touch. That is the material that sustains a chimney fire.
- Damaged caps and screens from woodpeckers and rodents. The tree canopy in the Placerville foothills puts chimneys inside a woodpecker and squirrel corridor. A Level 2 inspection often turns up a knocked-out cap, a nest in the flue, or a cracked tile the homeowner never saw because it sits above the roofline.
- Flashing separation at the roofline. Trapped water freezes behind the flashing and pushes it away from the brick. Once it separates, every rain event sends water into the chase. This is the repair call most likely to be urgent, and the one we price and address first when we inspect a Placerville home.
Pricing for Chimney Repair in Placerville, CA
A standard chimney sweep and inspection in Placerville runs $180 – $340. Mortar repointing and tuckpointing work typically lands between $400 and $1,100 depending on how many courses of brick need reworking. Flashing repair runs $450 – $1,200. Crown rebuilding sits in the $600 – $1,400 range. A complete flue relining with DuraFlex or HeatShield is the big-ticket item at $2,500 – $6,500. What changes the price is access: a straight flue on a single-story ranch off Green Valley Road costs less than an offset flue on a two-story home with a steep roofline up toward Placerville Airport. Call (830) 251-4560 and we’ll give you a written price before any work begins. The estimate is free.
We Also Serve Cities Near Placerville
Our crews cover more than just downtown Placerville. We run regular routes through Chimney Repair in Placerville and the surrounding foothill communities, including Diamond Springs, Shingle Springs, Georgetown, and El Dorado Hills. The same written pricing, the same guarantee, and the same background-checked technicians on every call.
Serving Placerville, CA - Our Local Coverage Area
We’re based in the Placerville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Placerville
A chimney in Placerville that burns oak or pine through the winter needs a sweep and Level 1 inspection once a year, ideally in late summer or early fall before burning season starts. That schedule works because it catches first-degree creosote before it has a season to glaze into third-degree tar. If you burn every day from November through March, schedule a second sweep mid-season. Call (830) 251-4560 and we’ll book the appointment and put the price in writing.
Every job starts with a camera inspection of the flue, the smoke chamber, and the crown. You see the footage. Then we sweep the flue with a brush matched to the liner material, remove creosote and any debris, check the damper, cap, and flashing, and send you a photo report of what we found and what we did. If repair work is needed, you get a written quote before any extra work starts. No camera footage, no recommendation.
We do not promise same-day repair service in Placerville. The work involved in crown rebuilding, flashing repair, or flue relining requires scheduling, materials, and access. What we do promise is a set appointment window, a written price before work starts, and a live person on the phone 24/7 so you can book that appointment without leaving a message. Call (830) 251-4560 to get on the schedule.
A hairline crack in the crown with no water staining and clean flue walls can usually wait until the next scheduled inspection. Surface rust on flashing that is still seated tight can also wait. What you should not put off is any visible gap between flashing and brick, water staining on the ceiling near the chimney, or a flue with third-degree creosote and a cracked liner. Those are active risks. A camera inspection gives you a straight answer on which category you are in, and we never recommend work without the footage to show you why.
We use DuraFlex for most stainless liner installations, HeatShield when a partial liner repair is possible, and Gelco for specific crown and wash applications. Flashing work uses Famco or Olympia Chimney components where a custom profile is needed. Every brand goes on your written quote, and all repairs carry a one-year written guarantee. If a covered repair fails within that year, we return at no charge.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Placerville since 2002.





Before
After
Before
After
Before
After