Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Spokane
Chimney repair in Spokane usually means one of two things: masonry that has cracked from freeze-thaw cycling, or a flue liner that has spalled and stopped doing its job. Most repairs run between $375 and $3,800 depending on scope, and you will have a written price before any work starts, not an estimate that moves once we are on the roof. Our Chimney Repair team serves homes across Spokane County, from the Perry District north to Mead and west through Airway Heights. Call (830) 251-4560 to schedule an inspection, and Hank Delano will walk you through exactly what we found, with camera photos you can see for yourself.
Why Flint Chimney Sweep Is Spokane’s Preferred Chimney Repair Company
Hank Delano has been running Flint Chimney Sweep since 2002 as part of the Garrison Partners family, and the standard in Spokane is the same one we hold in every market: write down the price, write down the scope, and back it with a 365-Day Done Right Promise. That guarantee covers every repair for a full year. If a covered repair fails, we return at no charge. No argument, no second invoice.
We work on the housing Spokane actually has. Craftsman bungalows in the Garland District, 1970s split-levels off Indian Trail Road, newer builds in the South Hill foothills. Each presents its own set of chimney problems, and our technicians are background-checked and uniformed, so the person at your door is the same person whose name was on the work order. Phones are answered by a live person around the clock, not a callback form.
Chimney Cap Replacement in Spokane
Chimney Cap Replacement in Spokane addresses the single most common entry point for water and animals into a flue. The cap sits on top of the chimney and keeps rain, snow, and nesting birds out of the liner. When a cap is cracked, missing, or installed without a proper spark arrestor, Spokane’s wet winters push moisture straight down into the firebox and smoke chamber, which accelerates mortar deterioration and can ruin a good liner in three to five years. A standard cap replacement with a professional-grade Olympia Chimney or Famco cap typically runs $350 to $650 installed, depending on flue size and roof access.
Signs You Need a New Cap
You hear birds or scratching sounds in the chimney, see rust staining on the exterior masonry, or find chunks of metal in the firebox after a wind storm. These are all indicators the cap has failed and moisture is already working its way down.
What the Replacement Involves
We inspect the crown at the same time, because a new cap on a crumbling crown does not solve the leak. If the crown is cracked or spalled, we quote the crown repair as a separate line item so you know exactly what each part costs before anything is replaced.
Chimney Liner Installation in Spokane
Chimney Liner Installation in Spokane means replacing the inner passage that channels smoke and combustion gases safely out of the house. Older Spokane homes often have original clay tile liners, and clay does not survive repeated freeze-thaw cycling well over decades. Once a liner cracks or spalls, combustion gases can leak into wall cavities or the living space. A new DuraFlex stainless liner or HeatShield resurfacing job in Spokane typically runs $2,800 to $5,400 depending on flue height, access, and whether the old liner must be removed first.
When a Homeowner Needs This
You see crumbling clay tile pieces in the firebox after a cleaning, or your Level 2 camera inspection shows missing mortar joints between tiles. That is not a cosmetic issue. A failed liner is a carbon monoxide risk and should be addressed before the next burn season.
Materials We Specify
For most Spokane chimneys, we specify DuraFlex stainless or HeatShield resurfacing because both handle acidic condensate from gas appliances and the thermal shock of a cold January fire better than clay. We also stock Copperfield liners for taller multi-story homes with longer flue runs.
Trusted Brands We Service in Spokane
Flint Chimney Sweep stocks professional-grade components from manufacturers that publish their own engineering specs, so you can verify what you are paying for. We install and service Olympia Chimney caps and dampers, Famco roof flashings, Copperfield custom liners, and DuraFlex stainless systems. If a part fails under the 365-Day Done Right Promise, we replace it and handle the manufacturer claim ourselves. For Spokane customers, that means no chasing warranty paperwork with an out-of-state distributor. We keep common Spokane-cap sizes and liner components on the truck, which keeps most repair visits to a single trip.
Common Chimney Repair Problems We See in Spokane Homes
- Spalled flue liners from freeze-thaw cycling. Spokane winters run repeated freeze-thaw cycles from November through March, and clay tile liners absorb moisture from combustion, then crack when that moisture freezes. A camera inspection shows the damage clearly before gas can leak into the house.
- Crumbling chimney crowns. The concrete crown at the top of a masonry chimney is exposed to standing snow and rain every winter. Once hairline cracks form, water seeps in, freezes, and widens the crack each year. Crown repair is the cheapest fix if caught early, and the most expensive rebuild if ignored.
- Third-degree creosote glaze in wood-burning flues. In homes that burn soft woods like lodgepole or ponderosa, combustion temperatures are lower and creosote condenses faster. Third-degree creosote is a hard, shiny glaze that a standard brush cannot remove. It usually requires chemical treatment or liner replacement.
- Damaged or missing chimney caps. Rain and snow are only half the problem. In spring, Spokane’s starling and swallow populations look for nesting cavities, and an uncapped flue is an open apartment. Nest material blocks airflow, traps moisture, and accelerates firebox deterioration.
Pricing for Chimney Repair in Spokane, WA
Here is what we charge in Spokane, in writing, before any work begins. A standard chimney cap replacement runs $350 to $650. A crown repair runs $800 to $1,600 depending on how much concrete must be removed and repoured. Mortar repointing on a typical Spokane chimney runs $1,200 to $2,800, based on square footage and how many courses need new mortar. Chimney liner installation runs $2,800 to $5,400. Flashing repair around the roofline runs $450 to $950. A full Chimney Repair in Spokane rebuild starts around $4,500 and goes up from there based on height, access, and county building code requirements. Every quote includes camera inspection and a photo report at no extra charge. Call (830) 251-4560 and Hank Delano will give you a flat price for the actual work you need, not a price range.
We Also Serve Cities Near Spokane
Flint Chimney Sweep serves Spokane and the surrounding communities, including Airway Heights, Mead, Medical Lake, and Cheney. Our crews run regular routes through Spokane County, so scheduling is straightforward and we do not charge extra just because you are outside the city center. Call (830) 251-4560 to check availability in your area.
Serving Spokane, WA - Our Local Coverage Area
We’re based in the Spokane area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Spokane
Yes, and the reason is not fire buildup. Spokane’s freeze-thaw cycles damage masonry and liners whether you burn or not, because water that gets into the chimney expands when it freezes and cracks the structure over time. A Level 1 inspection every year catches small crown and mortar damage before it becomes a rebuild. If you rarely use the fireplace, an annual check is still the cheapest maintenance you can buy for a chimney. Call (830) 251-4560 and we will schedule it at a flat rate.
A Level 1 is a visual check of the accessible exterior and interior surfaces, no camera, no roof removal. A Level 2 adds a camera scan of the flue interior and the exterior of the chimney, including the roof flashing and cap. This is what we recommend for Spokane homes because it shows spalled liners and hidden crown damage before they become carbon monoxide risks. A Level 3 is invasive and only used when a Level 2 suggests a structural problem that requires opening a wall or masonry to inspect. For most Spokane homeowners, a Level 2 every one to two years is the right interval.
Third-degree creosote looks like shiny black tar glazed onto the flue wall, and it forms when smoke cools before it exits the chimney, which happens more often in mild shoulder-season burns in Spokane. A standard wire brush cannot remove it. The fix is usually a chemical treatment that breaks down the glaze so it can be swept, or a liner replacement if the creosote has damaged the flue tile beneath. A camera inspection tells you which one you actually need. Call (830) 251-4560 for a quote.
Yes, and it is not an estimate. Flint Chimney Sweep writes down the price, the scope of work, and the materials before a single tool comes off the truck. The number on the invoice is the number you approved. That is The Garrison Standard, and it applies to every repair in Spokane, no exceptions.
If your camera inspection shows only cosmetic mortar wear or a cracked cap that is not yet leaking, you can usually wait until the next budget cycle or the off-season without meaningful risk. The off-season is actually the best time to schedule in Spokane, because we can usually get to the job faster and do masonry work in better weather. But if the liner is cracked or the crown is openly letting water into the smoke chamber, that should not wait, because the damage accelerates with every freeze cycle. Call (830) 251-4560 and we will tell you plainly which situation you are in.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Spokane since 2002.