Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Stafford
Chimney repair in Stafford typically runs $250 – $450 for crown and mortar work, $400 – $900 for cap installation with materials, and $1,800 – $3,400 for a full flue relining. Most Stafford homes we repair were built between the 1970s and early 2000s, and the problems follow the era. Flint Chimney Sweep sends background-checked, uniformed technicians to every Stafford job, and every repair carries a written 365-Day Done Right Promise. Call (830) 251-4560 for a straight answer and a written price before any work begins.
We’re part of the Garrison Partners family, founded in 2002, and we run every Stafford repair under the same Garrison Standard: the scope, the price, and the guarantee all go in writing before a tool comes off the truck.
Why Flint Chimney Sweep Is Stafford’s Preferred Chimney Repair Company
Stafford homeowners don’t have to guess what a repair will cost. We write the price down before we start, and the number you approve is the number on the invoice. That’s the Garrison Code, and it applies to every call we run in Stafford, whether it’s a crown patch off Avenue E or a full rebuild near the Southwest Freeway.
Our Stafford customers know the tech at the door. Every technician is background-checked and uniformed, and the phone is answered by a live person around the clock, including weekends and nights. When a chimney starts smoking back into the house, you don’t want a voicemail tree.
Hank Delano runs our repair crews, and he’s particular about documentation. Every repair includes camera inspection and a photo report, so you see exactly what was wrong and what we did about it. No mystery, no upselling off a claim you can’t verify.
Chimney Masonry Repair in Stafford
Chimney Masonry Repair in Stafford means dealing with the way clay soil and year-round humidity work on older brick and mortar. Hairline cracks in the crown let water in, the water tracks down the flashing, and three years later the damper is rusted shut and the mortar joints are going soft. That’s the pattern we see constantly on 1970s and 80s brick ranches in Stafford.
Most Stafford masonry work is repointing (refilling worn mortar joints), crown repair, or partial rebuilding. A typical repointing job runs $600 – $1,200 depending on access and how many courses are involved. Spalling brick replacement, where the brick face has popped off from trapped moisture, usually lands between $800 and $1,500. The Garrison Standard means you get a written price for the exact scope before we start, and the repair is covered for a full year.
Mortar That’s Starting to Go
Stafford’s older chimneys often show soft mortar at the crown and the top three or four courses. We cut out the failed joints and pack fresh mortar matched to the existing brick. The fix is straightforward, but it has to be done before water gets behind the brick and starts the freeze-thaw and clay-swell cycle that pulls the whole stack apart.
Real Repairs, Not Cosmetic Patches
When we find spalled brick or a crown cracked through in Stafford, we tell you what can wait and what cannot. Some cracks are cosmetic. A crown that’s broken at the flue opening is not. We show you the camera photos and let the evidence make the case.
Chimney Cap Installation in Stafford
Chimney Cap Installation in Stafford is one of the most cost-effective repairs we do, but it’s often skipped until water has already done damage. A proper cap keeps rain, leaves, birds, and squirrels out of the flue. On Stafford homes with tight newer construction, it also helps stabilize draft by cutting the wind shears that push smoke back down the flue.
We install stainless steel caps, either standard or custom-sized to the existing flue tile. A standard cap installed in Stafford typically runs $400 – $650. A custom stainless cap for an odd-sized or multi-flue chimney can run $650 – $900. If the flue tile itself is cracked or spalled at the top, we may need to grind the tile and fit a cap with legs that sit deeper, which adds to the labor. Every cap install gets a written price first, and it’s covered under the same one-year guarantee.
Bird and Squirrel Entry
Stafford’s tree canopy is thick along the older neighborhoods, and squirrels will nest in an open flue given half a season. We have pulled entire nests out of smoke chambers on homes near Avenue E. A cap solves it permanently, and it costs a fraction of what a liner replacement runs.
Rust and Draft Problems
On newer two-story Stafford homes near the Southwest Freeway, tight construction starves the firebox of make-up air. A well-fitted cap with the right mesh and crown coverage reduces the backdraft that pushes smoke into the room. It’s not a cure for every draft problem, but it’s part of the fix in a lot of houses we see.
Trusted Brands We Service in Stafford
We stock and install professional-grade chimney materials from HeatShield, Gelco, and Olympia Chimney, so Stafford customers aren’t waiting on parts shipped from out of state. HeatShield is our go-to for resurfacing cracked flue liners, Gelco for chimney waterproofing, and Olympia caps and terminations hold up well in Stafford’s humidity and rain. When we specify a brand, it’s because it fits the job, not because it pads the margin. You’ll see the brand name on the written quote, along with the price.
Common Chimney Repair Problems We See in Stafford Homes
- Cracked flue liners hidden behind light creosote. A brush-and-go cleaning without a camera pass leaves the real defect in place. We run a Level 2 camera inspection on every Stafford repair so the liner crack doesn’t go unnoticed until it’s a fire hazard.
- Crumbling crowns on older brick chimneys. Stafford’s clay soil moves with the seasons, and that movement opens hairline cracks at the crown. Water gets in, works down, and rusts the damper shut before you ever see a stain on the ceiling.
- Weak draft in newer tight homes. Houses near the Southwest Freeway with modern windows and doors often starve the firebox of combustion air. The flue is clean, but smoke still spills back. The fix may be make-up air, a different cap, or both. We diagnose before we recommend.
- Flashing failures at the roofline. Stafford gets steady rain, and flashing that was installed 20 years ago does not last forever. When water tracks down the chimney chase and stains the ceiling, the flashing is usually the first place we look before we touch the masonry.
Pricing for Chimney Repair in Stafford, TX
Here are the ranges we quote in Stafford: repointing and mortar repair, $600 – $1,200. Spalling brick replacement, $800 – $1,500. Crown repair or rebuild, $450 – $950. Stainless chimney cap supply and install, $400 – $900. Flue relining with HeatShield, $1,800 – $3,400 depending on flue height and diameter. Flashing repair, $350 – $750. Every price is written down before work starts. The estimate is free, and the number on the quote is the number on the invoice. Call (830) 251-4560 to get a written scope for your Stafford chimney.
We Also Serve Cities Near Stafford
Flint Chimney Sweep runs repair crews throughout the Stafford area, including Chimney Repair work in Sugar Land, Missouri City, Bellaire, and Fresno. If you’re in one of those cities and need a camera inspection or a written repair quote, the same Garrison Standard applies. Call (830) 251-4560 and a live person will get you scheduled.
Serving Stafford, TX - Our Local Coverage Area
We’re based in the Stafford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Stafford
Once a year if you burn regularly through the winter. In Stafford, most fireplaces get seasonal use from November through February, and a single cord of wood can leave enough creosote in the flue to be worth removing. If you only burn a few fires a year, every 18 to 24 months may be enough. The honest answer is that a camera inspection tells you more than a calendar. Call (830) 251-4560 for a sweep and Level 2 inspection at a written price.
Every repair we do in Stafford includes a Level 2 camera inspection, and you get the photos. We do not repair what we have not seen. On a two-story in the Stafford Run area, our tech found a flue liner cracked at the first offset on a 2005 masonry chimney and pulled half a bucket of second-degree creosote out of the smoke chamber. We set a HeatShield liner repair, replaced a spalling crown, and fitted a new stainless cap. The homeowner had before-and-after camera photos before we packed the truck. That’s the standard on every job.
It depends on how far the cracking goes. Surface spalling on the crown edge can usually wait a season. A crack that runs through the crown around the flue tile is an open channel for water straight into the chimney structure, and Stafford’s clay soil plus wet winters will make it worse. That one should be fixed before the rainy season. We will tell you plainly which situation you have. Call (830) 251-4560 and we’ll put eyes on it and give you a written price.
Yes. Many Stafford homes have prefab metal chimneys or wood-burning inserts, and they fail differently than masonry. We inspect the firebox, the damper, the flue pipe, and the termination cap. We work with Olympia Chimney components for prefab replacements, and we tell you when a repair makes sense versus when the insert is at the end of its service life. The photos and the price go in writing either way.
We staff phones with a live person around the clock, and we get repair calls scheduled as fast as the schedule allows, but we do not promise same-day dispatch. If your chimney is smoking back into the house or you smell tar, stop using the fireplace and call (830) 251-4560. We will get you on the schedule, tell you what to check in the meantime, and put the repair price in writing before we start.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Stafford and the surrounding area.





Before
After
Before
After
Before
After