Chimney Repair in Thompson’s Station - Inspected on Camera, Then Priced in Writing

Fast, Reliable Chimney Repair Across Thompson’s Station

Chimney repair in Thompson’s Station typically runs $185 – $650 for cap installation or replacement, $400 – $1,200 for flashing repair, and $1,500 – $4,500 for partial rebuilding. Most jobs are completed in one visit, with a written price delivered before any work starts. We serve homes along Columbia Pike, Tollgate Village, and the subdivisions stretching toward Franklin, and every repair carries a written guarantee valid for one full year.

Call (830) 251-4560

If you live in Thompson’s Station and your chimney is leaking, your cap is loose, or your mortar is crumbling, call (830) 251-4560. A live person answers, and we’ll get a uniformed, background-checked technician to your door on the schedule we agreed to. No voicemail trees. No callback forms.

Much of Thompson’s Station is new-build construction on former farmland, which means a lot of the chimneys here are factory-built fireplaces with thin metal flue liners, not the tall masonry stacks you find in older Middle Tennessee towns. That changes what repair work actually looks like, and it’s why we approach every job here differently than we would in, say, downtown Franklin. The good news: factory-built flues are often easier to repair than masonry, but only if someone actually looks at them with a camera before recommending work. We do.

Why Flint Chimney Sweep Is Thompson’s Station’s Preferred Chimney Repair Company

Thompson’s Station homeowners keep calling us back for three reasons: we put the price in writing before we touch the chimney, we stand behind the repair for a full year, and we don’t recommend work we can’t show you. Our Chimney Repair team works under The Garrison Standard, the same code every Garrison Partners location follows, and here’s what that means in practice.

When a technician arrives at your Thompson’s Station home, they’re uniformed and background-checked. You know who’s walking through the door. Before any tool comes off the truck, you get a written price covering the full scope of work. The number on the invoice is the number you approved. If a covered repair fails within 365 days, we return at no charge. That’s the 365-Day Done Right Promise, and it’s not a marketing line, it’s the document you keep.

We’ve worked on chimneys in Tollgate Village, Bridgemore Village, and along Critz Lane near Highway 31. We know the builder-grade caps that come on new construction here, we know how the clay-heavy soil shifts footings and cracks crowns, and we know what a Thompson’s Station homeowner actually needs done versus what can safely wait. Hank Delano leads our team, and he’s built the company since 2002 as part of the Garrison Partners family of independently owned chimney service companies. The same discipline applies to every call we run in Williamson County.

Chimney Cap Installation in Thompson’s Station

Chimney cap installation in Thompson’s Station means fitting a weatherproof cap over the flue opening to keep rain, leaves, animals, and wind-driven debris out of your chimney. On a factory-built fireplace, this is usually a simple, same-day job; on a masonry chimney, it takes a little more custom fitting. A standard cap installation in Thompson’s Station typically runs $185 – $450 depending on whether the flue is round, square, or multi-flue, and whether any custom fabrication is needed.

New Construction, Missing Caps

We regularly find new Thompson’s Station homes where the builder-installed cap was never properly secured. It pops off in the first high wind or under raccoon weight, and suddenly the flue is open to rain and animals. If your house is under ten years old and you’ve never had the chimney looked at, there’s a real chance your cap is loose right now.

Cap Materials and Fit

We specify caps from Olympia Chimney, Famco, and Copperfield, matched to your flue’s exact dimensions. A cap that’s too loose rattles and lets in rain; one that’s too tight restricts draft and sends smoke back into the room. We measure, we fit, and we photograph the finished job so you can see the cap seated correctly from the ground, no ladder required.

Chimney Cap Replacement in Thompson’s Station

Chimney cap replacement in Thompson’s Station is needed when the existing cap is dented, rusted through, blown off entirely, or sized wrong for the flue. In Thompson’s Station, we see replacement jobs most often on new-construction homes where the original cap was a thin builder-grade unit that corroded within a few years. Replacement typically runs $225 – $650, including removal of the old cap, inspection of the flue top, and installation of the new unit.

When Replacement Beats Repair

A dented cap can sometimes be reshaped, but once the mesh screen is torn or the metal has rusted through, patching doesn’t pay. You end up with the same leak path, just with a patch on top. We’ll tell you plainly if your cap has life left or if replacement is the straight answer.

Raccoons and High Wind

Raccoons are a genuine problem in Thompson’s Station, especially in the newer subdivisions where trees and attics and open flues meet. A raccoon on a factory-built cap will bend it, pop the mounting brackets, or knock the whole thing off. We install replacements with heavier-gauge metal and stronger fastening than what came with the house, which matters in the wind that sweeps across the open ground around Thompson’s Station.

Trusted Brands We Service in Thompson’s Station

We stock parts and specify materials that are known quantities in the chimney trade: DuraFlex for flue relining, HeatShield for flue repair and resurfacing, and Famco and Copperfield for caps and terminations. That matters for Thompson’s Station homeowners because a repair is only as good as the part behind it. If you call about a chimney repair in Thompson’s Station, we don’t want to tell you we have to order a part and come back in two weeks. For the most common repair jobs on factory-built fireplaces, we carry what’s needed on the truck. For relining and resurfacing work, we’ll tell you the brand and why it’s spec’d for your chimney, so you can verify it independently before we start.

Common Chimney Repair Problems We See in Thompson’s Station Homes

After running calls all over Williamson County, here’s what actually shows up in Thompson’s Station, in order of frequency:

• Builder-grade caps popping off. The caps installed on new construction here are thin, lightly fastened, and no match for raccoons or the wind that comes across the open farmland. Once the cap is off, rain pours straight down the flue and into the firebox.
• Uninspected flues in homes that have never burned a fire. Homeowners assume no fire means no problem. The liner and crown go unexamined until moisture staining or a draft smell shows up. A camera inspection takes twenty minutes and either rules out the problem or documents it.
• Shifting footings cracking crowns and pulling flashing loose. Thompson’s Station sits on clay-heavy soil that expands and contracts with moisture. Footings shift, chimney crowns crack, and flashing pulls away from the roofline, letting water track down into the smoke chamber and firebox.
• Dampers that won’t seat. On factory-built fireplaces, the damper is often the flimsiest part. A bent or misaligned damper lets conditioned air leak up the flue year-round. We reseat or replace dampers regularly, and most Thompson’s Station homeowners notice the difference on their next utility bill.

Pricing for Chimney Repair in Thompson’s Station, TN

We Also Serve Cities Near Thompson’s Station

Our crews run Chimney Repair in Thompson’s Station and the surrounding area regularly. We also serve Franklin, Spring Hill, and the broader Nashville-Davidson metro, plus Murfreesboro to the east. If your chimney is in Williamson County or the edge of Davidson County, call us for the same flat, written pricing and the same one-year guarantee. Scheduling is coordinated from our Memphis office, and crews serve Thompson’s Station locally.

FAQs About Chimney Repair in Thompson’s Station