Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Sweep Across Argyle
A standard chimney sweep in Argyle, TX typically runs $189 – $289, and a full sweep with a Level 1 inspection is what most homes here need before burning season starts. We’re Flint Chimney Sweep, part of the Garrison Partners family founded in 2002, and we work on the specific mix of older masonry fireplaces and newer factory-built units you’ll find across Argyle’s acreage tracts and new subdivisions. Our crews serve Argyle locally from the Dallas-Fort Worth metro office, and Hank Delano, who runs our company, holds every job to The Garrison Standard: a written price before we start, a documented camera inspection, and a full-year guarantee on any repair we perform. Call (830) 251-4560 and a live person answers, 24 hours a day.
Why Flint Chimney Sweep Is Argyle’s Preferred Chimney Sweep Company
Argyle homeowners call us because we don’t leave anything to guesswork. Every appointment starts with a written price before a single tool comes off the truck, and every job follows The Garrison Code: uniformed, background-checked technicians, professional-grade materials specified by the job, and no upselling. When we finish a sweep or repair in Argyle, you get a written guarantee valid for one full year from the service date. If a covered repair fails within that period, we return at no charge. That’s the 365-Day Done Right Promise, and it applies to every repair we make.
Our reputation in Argyle comes from doing the work the same way every time. Homeowners here know what they’re getting: a documented camera inspection, a photo report they can see for themselves, and a straight answer about what can wait. Hank Delano built this company on the belief that a chimney company should not be the one pressuring you into masonry work you can’t verify. We show you the footage. You decide.
Chimney Maintenance in Argyle
Chimney Maintenance in Argyle is different from a one-time sweep because it accounts for what this town’s housing stock actually throws at you: spalling crowns on older masonry fireplaces off roads like Frenchtown, and factory-built metal flues in the new subdivisions around Harvest and Country Lakes. A proper maintenance visit runs $189 – $249 and covers a sweep, a camera check of the flue, and a written assessment of the crown, cap, and damper. We document everything. You keep the photos.
What We Check on Every Maintenance Visit
We run a camera up the flue and look at the crown, the smoke chamber, and the damper. On Argyle’s older masonry fireplaces, the crown is usually the first thing to fail because north Texas weather swings hard between freeze and thaw. On factory-built units, we check the metal liner, the termination cap, and the clearance to any cedar fencing or roofline material nearby.
Creosote and Soot Removal
Creosote removal in Argyle costs $189 – $289 depending on whether the buildup is first-degree flaky soot or third-degree glaze. Soot removal on its own runs $150 – $200 for a standard fireplace. We use brushes matched to the liner type, because a brush sized for a masonry flue can score a metal liner from DuraFlex or Olympia Chimney if someone isn’t paying attention.
Chimney Sweep Services in Argyle
Chimney Sweep Services in Argyle start at $189 for a standard sweep with a Level 1 inspection. That includes running the brush the full length of the flue, removing creosote and soot from the firebox and smoke shelf, and checking the damper operation. If you have a fireplace that hasn’t been swept in more than two years, or you’re buying a home in Argyle and don’t know the chimney’s history, we recommend adding a Level 2 camera inspection for $249 – $349. That gets you the photo report and a written summary of what’s sound and what can wait.
Annual Sweep for Fireplaces and Stoves
An annual sweep is what we recommend for Argyle homes that burn more than a cord of wood a season, or that have an open masonry fireplace rather than an insert. The sweep itself takes about an hour. The inspection takes longer if we’re documenting water damage or measuring clearances. We schedule by appointment and we arrive inside the window we give you.
Fireplace Cleaning Beyond the Flue
Fireplace cleaning in Argyle isn’t just the flue. We also clean the firebox, remove ash and soot, and check the hearth and surround for cracks. On gas fireplaces, we verify the log set and pilot assembly are clean and the venting is open. Gas units still need annual service because soot and dust build up on the burner and can affect combustion.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Argyle
We stock and service parts from Famco, Copperfield, and DuraFlex, and we specify the material by the job and the house, not by what’s easiest to keep on the truck. If you have a factory-built fireplace in a newer Argyle subdivision, we can usually match the existing cap or termination from Famco or Copperfield and have it installed the same visit. For relining work, we use DuraFlex systems sized to the flue. We don’t cut corners on materials because the guarantee we write has to stand for a full year.
Common Chimney Sweep Problems We See in Argyle Homes
- Spalled crowns on 20-year-old masonry fireplaces: On the acreage lots off Crawford Road and Frenchtown Road, the original chimney crowns are starting to crack and flake. Water gets behind the crown, runs down into the smoke chamber, and damages the damper and firebox before you ever see a stain inside the house.
- Third-degree creosote glaze in flues that see occasional use: Argyle homeowners who burn a few fires a year still get creosote, but it tends to sit longer and harden. Glaze needs mechanical removal with a rotary tool, not a standard brush, and we identify it on camera before we quote so there’s no surprise on the invoice.
- Factory-built metal flues with creosote in the bends: The new subdivisions in Argyle use modern metal chimney systems, and creosote collects in the offsets and elbows. These need flexible rods and smaller brushes, and we check the termination cap for debris because birds and leaves collect there faster than on open acreage.
- Improper clearances from new cedar fencing and roofline additions: We regularly see newer Argyle homes where a fence or covered patio addition was built too close to the chimney termination. The fix is sometimes as simple as a different cap, but it has to be inspected, because the clearance specs differ by fireplace type and fuel.
Pricing for Chimney Sweep in Argyle, TX
| Service | Price Range in Argyle |
|---|---|
| Standard chimney sweep with Level 1 inspection | $189 – $289 |
| Level 2 camera inspection | $249 – $349 |
| Creosote removal (mechanical, third-degree glaze) | $289 – $389 |
| Soot removal only | $150 – $200 |
| Fireplace cleaning (firebox, hearth, damper) | $120 – $180 |
What changes the price in Argyle is the flue length, the liner type, and whether we’re dealing with first-degree soot or hardened glaze. We give you the written price before any work starts, and that price is the number on your invoice. Every estimate is free. Call (830) 251-4560 and we’ll set a time.
We Also Serve Cities Near Argyle
Beyond Argyle, our crews handle chimney cleaning and inspections in Flower Mound, Roanoke, Lake Dallas, and Denton. If you’re in one of those communities, the same written pricing and guarantee apply. Learn more about our full Chimney Sweep process, or explore how Chimney Sweep in Argyle compares to what you’d find in the surrounding area.
Serving Argyle, TX - Our Local Coverage Area
We’re based in the Argyle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Argyle
If you burn wood more than a dozen times a season, sweep it every year. If you burn occasionally and the chimney is open masonry, every two years is usually enough. If you have a factory-built fireplace and burn only gas, an annual check with a cleaning every two years keeps the burner and vent in working shape. Call (830) 251-4560 and we’ll help you figure out your schedule.
A sweep here means running a brush sized to your flue the full length, removing creosote and soot from the firebox and smoke shelf, and checking the damper. We also run a camera up the flue on most visits and send you the photo report the same day. That camera step is the part that tells you whether the crown is letting water in or the liner is sound, and it’s included in our standard sweep pricing for Argyle homes.
Third-degree creosote is the hardened, glossy buildup that fuels chimney fires, and yes, it’s worth addressing as soon as it’s found. It can’t be removed with a standard brush; it takes a rotary tool and takes longer, which is why the price runs $289 – $389 in Argyle. But we don’t tell you it’s there until the camera shows it, and you’ll see the footage yourself before approving the work. That’s the whole point of The Garrison Standard.
Yes. That’s exactly how we operate. We run the camera, document what we find, and show you the photos. Then we tell you what’s urgent, what can wait, and what the repair would cost. If something can safely wait until spring, we say so. You never commit to masonry work based on a technician’s word alone.
Yes, and it matters for how we sweep it. Factory-built units use metal flues, often from brands like DuraFlex or Olympia Chimney, and those need flexible rods and brushes matched to the pipe diameter. Masonry chimneys have clay tile liners that need a different approach. In Argyle we see both on the same road, so we bring equipment for each and we confirm what you have before we start.
Call Flint Chimney Sweep for Your Argyle Home
When you’re ready to book a sweep or you want a camera inspection to see what’s actually going on inside your flue, call (830) 251-4560. A live person answers. We’ll give you a written price before any work starts, and the work carries the 365-Day Done Right Promise in writing. Hank Delano and our team serve Argyle and the surrounding towns the same way we’ve done it since 2002: document everything, quote it honestly, and stand behind it for a full year.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Argyle since 2002.