Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Sweep Across Crosby
A standard chimney sweep in Crosby, TX runs $189 to $329 depending on flue condition, access, and whether you need a Level 1 or Level 2 inspection added. Most Crosby homes we service fall between those numbers, and you’ll know your exact price in writing before any tool comes off the truck. If you live off FM 2100, up near Newport, or back in the older streets around Church Street, we know your chimney faces the same Gulf Coast humidity everyone in Crosby deals with. Call (830) 251-4560 and a live person answers, day or night.
Why Flint Chimney Sweep Is Crosby’s Preferred Chimney Sweep Company
Crosby homeowners keep our number because we hand them a written price before work starts and a written one-year guarantee on every repair we make. That’s not a sales pitch. It’s The Garrison Standard, the same code every Garrison Partners location follows since 2002. Our Chimney Sweep crew rolls in uniformed, background-checked, and carrying professional-grade equipment, not a bucket and a hardware-store brush.
We work all over Crosby, from the newer subdivisions along the east side to the acreage properties near the San Jacinto River. The homes out there sit on clay-heavy soil with high water tables, and that moisture wicks into masonry. We see the result every week: flue tiles failing from the inside where a visual check from the firebox catches nothing. Our techs run a camera up the liner on every inspection and hand you photo evidence before recommending a single repair.
Dispatch is coordinated from our Houston office, but the crew serving Crosby lives and works in this market. That means when you call about a smoky draft on a Saturday in January, you’re not waiting on a crew from across the metro to figure out where Newport subdivision even is.
Gas Fireplace Cleaning in Crosby
Gas Fireplace Cleaning in Crosby is not a wipe-down of the glass and a dusting of the logs. It is a removal of soot deposits from the burner assembly, pilot assembly, and firebox, plus a check of the venting system that carries carbon monoxide out of your house. In Crosby, where many homes built in the 1990s and 2000s have direct-vent gas fireplaces, this service typically runs $149 to $249.
Burner and Pilot Service
Soot accumulation on a gas burner doesn’t burn off on its own. It coats the ports, disrupts the flame pattern, and makes the fireplace run inefficient while producing more carbon monoxide. We pull the logs, clean the burner tube thoroughly, and reset the ember bed so the flame burns properly again.
Venting Check
Humid Gulf Coast air accelerates corrosion on venting components that may have been installed ten or fifteen years ago. We inspect the full run from the firebox to the termination cap, looking for rust-through, separation at joints, and partial blockages from bird nests or debris. If the venting isn’t sound, we tell you in writing and show you the photos.
Chimney Maintenance in Crosby
Chimney Maintenance in Crosby means keeping the entire system, not just the flue interior, working through every season we get down here. A maintenance visit runs $179 to $289 and includes a sweep, a cap and crown check, and a written summary of anything that needs attention now versus something that can safely wait a year.
Cap and Crown Inspection
The crown is the concrete slab on top of your chimney, and the cap is the metal hat that keeps rain and wildlife out. In Crosby, we see cracked crowns on nearly half of the homes we service. Rain pools in the cracks, seeps into the masonry, and during one of our rare hard freezes the trapped water expands and splits the masonry further. We check both on every maintenance call and tell you honestly whether a $189 crown patch now prevents a $900 rebuild later.
Water Repellent Treatment
Masonry in Crosby absorbs humidity all summer long. A penetrating water repellent, not a sealer, lets the brick and mortar breathe while stopping liquid water from soaking in. We can’t stop Gulf Coast humidity, but we can keep it from accelerating spalling in your chimney’s brick face.
Trusted Brands We Service in Crosby
When repairs are called for, we work with materials specified for the job, not whatever is cheapest on the truck. That means HeatShield for cast-in-place flue resurfacing, Gelco for chimney caps and chase covers that hold up to years of Crosby humidity, and Olympia Chimney and Famco components for venting and terminations. We stock common replacement parts for the gas fireplaces and pre-fab systems we see throughout Crosby, which means shorter turnaround when a crown cap fails or a flue tile needs setting.
Common Chimney Sweep Problems We See in Crosby Homes
- Freeze-thaw cracked flue tiles. Crosby’s wet winters and occasional hard freezes mean water gets into hairline cracks, freezes, expands, and splits clay tiles from the inside. A visual check from the firebox will never show it. A camera will, every time.
- Third-degree creosote glaze. Humid air makes creosote deposits denser and harder. A basic brush pass polishes the surface of a glaze layer without removing it, which leaves the chimney a fire hazard. We identify glaze during the sweep and use rotary tools rated for it.
- Corroded chase covers on pre-fab chimneys. The sheet metal chase, or housing, around a factory-built chimney rusts fast in Crosby’s humid, sometimes salt-tinged air. A rusted-out chase cover lets rain directly into the fireplace system. Most of the older pre-fabs in Crosby need a new Gelco cover.
- Uncapped flues after storm season. High wind from the storms that push through Southeast Texas dislodges weak caps and sends debris into the flue. We find old birds’ nests, leaves, and the occasional tennis ball above the damper on uncapped Crosby chimneys.
Pricing for Chimney Sweep in Crosby, TX
A flat-price sweep in Crosby runs $189 to $329. A Level 1 inspection, done alongside the sweep, adds $99 to $149. A Level 2 inspection, which includes the full camera run through the flue, adds $199 to $299 but is required if you are selling the home, after a chimney fire, or after any severe weather event. Gas fireplace cleaning runs $149 to $249. If you need a repair, such as a chimney cap replacement or a crown patch, that price is quoted in writing and approved by you before we begin. Call (830) 251-4560 for a free estimate, which we can often do over the phone if you have a recent inspection or can describe the fireplace and chimney setup.
We Also Serve Cities Near Crosby
Our crews cover Highlands, Channelview, Baytown, and Humble with the same written pricing and one-year repair guarantee. If you live in one of those communities or unincorporated Harris County between them, the process is identical: written price upfront, camera inspection, photo report. Call (830) 251-4560 to schedule.
Serving Crosby, TX - Our Local Coverage Area
We’re based in the Crosby area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Crosby
Once a year is still the right interval, even if you burn infrequently. In Crosby’s humid climate, creosote from even occasional fires stays sticky and dense rather than drying out, which makes it harder to remove the longer it sits. Annual sweeping also gives us a chance to catch the freeze-thaw tile cracking that happens here silently. If you burn less than a cord a season, you might stretch that to eighteen months, but not past two years in this climate. Call (830) 251-4560 and we’ll help you set the right schedule for your actual burning habits.
A camera inspection shows the entire flue interior, joint by joint, in high resolution, where a flashlight from the firebox can reach only the first few feet. In a 20-foot clay tile liner, cracks at the top from freeze-thaw, spalling mortar between tiles, or a failed joint hidden behind the smoke chamber will never be visible from below. The camera catches all of it, and you get every photo in writing. That’s how we found a cracked clay tile on Kennings Road that a previous visual-only sweep had missed for two years running. Call (830) 251-4560 if a sweep quoted you a price without mentioning inspection.
The price we quote on the phone is a flat price. You approve it in writing before any work begins, and the number that goes on the invoice is the number you approved. What can change is if we find something during the inspection that requires additional work, but you approve a separate written quote for that before any of it is done. We do not move the price at the door. That promise applies to every Crosby home we service, no exceptions. Call (830) 251-4560 for a free estimate.
After a hard freeze, have a Level 1 or Level 2 inspection done if you plan to burn. The freeze-thaw cycle in Crosby’s humid masonry is exactly what causes clay tile spalling and mortar joint failure. Most homeowners won’t notice until smoke backs up, which is the last warning a liner gives you. A quick camera run confirms whether the freeze opened anything up. If it did, a spot repair with HeatShield sets the tile properly. If it didn’t, you’ve spent a small inspection fee for certainty. Call (830) 251-4560 and we can schedule an inspection before your next fire.
Minor surface rust on a chase cover can usually wait a season. A cracked crown that’s actively letting water into the masonry cannot, because the damage compounds every time it rains. A thin layer of soot or first-degree creosote is what the annual sweep handles. Third-degree creosote glaze cannot wait because it is a fire hazard. You’ll know exactly which category your chimney falls into from the written report and photos we hand you after every appointment. Call (830) 251-4560 and we’ll give you a straight answer, not a pressure pitch.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Crosby since 2002.