Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Franklin
A standard chimney sweep in Franklin, TN typically runs $189 – $320, and the job usually takes 45 – 90 minutes. If you’re calling from downtown Franklin, Fieldstone Farms, Westhaven, or anywhere off Mack Hatcher Parkway, we’ll give you a written price before any work starts, not after. We dispatch background-checked, uniformed technicians to Franklin throughout the week, and the phone is answered by a live person around the clock. Call (830) 251-4560 for a free estimate.
Franklin’s housing stock splits into two very different chimney systems. A pre-1900 home off Main Street often has an original masonry flue with clay tile liners and mortar joints that have seen 100 Tennessee winters. A 2005 build in a Cool Springs subdivision likely has a factory-built metal fireplace with a stainless liner. We quote based on which one you actually have, because brushing a clay flue and scoping a metal system are not the same job at the same price.
Why Flint Chimney Sweep Is Franklin’s Preferred Chimney Sweep Company
We run on The Garrison Standard, the same operating code every Garrison Partners location follows since 2002. That means three things happen on every job in Franklin: a written price is delivered before any tool comes off the truck, the technician is background-checked and uniformed, and any repair we make carries a 365-Day Done Right Promise in writing. If a covered repair fails within one full year, we return at no charge. No argument, no re-quoting, no fine print.
Local homeowners keep asking us the same question: what does the camera actually show? So we hand over a photo report with every inspection, showing the flue liner, smoke chamber, and crown. You see what we see. That’s the fastest way to tell a creosote load from a bird nest, and it’s why a Franklin homeowner signed off on a damper replacement last month instead of a full reline, saving roughly $2,400 by looking at the photos.
Our crews coordinate scheduling from the brand’s Memphis office and serve Franklin locally. Hank Delano leads the operation, and the pricing model is non-negotiable across every location: flat and documented before work begins. If you want more details about our Chimney Sweep process, the service hub page walks through it step by step. For what that process looks like specifically in Franklin, keep reading.
365-Day Done Right Promise
Every repair we make in Franklin carries a written guarantee valid for one full year from the service date. If a covered repair fails during that window, we schedule a return visit at no charge. We don’t prorate, we don’t negotiate, and we don’t ask you to re-explain what went wrong.
Written Price Before Work Starts
The number on your invoice is the number you approved before the first brush touched your flue. That applies to every sweep, every inspection, and every repair in Franklin. If the camera scope uncovers a cracked crown or a failed cap, you’ll get a separate written quote for that work, and you can say no. No driveway surcharges.
Chimney Cleaning in Franklin
Chimney Cleaning in Franklin means removing creosote, soot, and debris from the flue liner, smoke chamber, and firebox so your fireplace vents properly and your house doesn’t fill with smoke on the first cold night of November. A standard sweep in Franklin runs $189 – $320, and the right time to book is late summer or early fall, before burning season hits and every chimney company in Williamson County is booked three weeks out. Most Franklin homes with regular wood-burning fireplaces need a sweep before the buildup reaches second-degree creosote, because that’s the stage where a chimney fire becomes a real possibility instead of a theoretical one.
Level 1 and Level 2 Inspections
A Level 1 inspection is the visual check that accompanies every sweep; we look for blockage, combustibles, and obvious deterioration in the firebox and flue. A Level 2 inspection adds camera scoping, which most Franklin homeowners request when they’ve bought a pre-owned home, changed fuel type, or had a chimney fire. The camera sees what a mirror and headlamp cannot: cracked clay liners, separated flue sections, and nests wedged where only a probe can reach.
Creosote Removal by Degree
First-degree creosote is a flaky soot that brushes off easily. Second-degree is a tar-like glaze that needs chemical treatment or a hard-scrub technique, and third-degree is a hardened fuel that can ignite at roughly 1,000°F. The homeowners on East Main Street whose 1920s firebox we cleaned last month had first-degree buildup in the flue, but the smoke chamber behind the damper held a concentrated load that a visual inspection alone never would have caught. That’s why we scope before we sweep, and why we hand you the photos after.
Fireplace Cleaning in Franklin
Fireplace Cleaning in Franklin is the part of the job you actually see: we pull the grate and andirons, brush down the firebox walls, remove ash and soot, and clean the glass doors if you have them. Most Franklin fireplaces using wood need this level of interior cleaning annually, especially in older brick fireplaces where soot cakes onto the firebrick. A combined fireplace cleaning and full flue sweep in Franklin typically runs $239 – $350 depending on flue height and whether the buildup extends into the smoke chamber.
Annual Sweep for Regular Burners
If you burn 30 or more fires per season in Franklin, you’re a candidate for an annual sweep. The smoke chamber behind the damper collects creosote faster than homeowners expect, and a yearly cleaning prevents that from hardening into a glaze that takes a chemical treatment to remove. A simple test: if you can see a shiny black coating on the fireplace wall above the damper, it’s time.
When Work Can Safely Wait
If you bought a Franklin home with a fireplace you’ve never used, and the previous owner’s records show a sweep within the last 18 months, a light dusting of ash in the firebox does not require immediate service. But if the damper is rusted shut, the chimney cap is missing, or you smell a smoky odor in the house after rain, water is getting in and the longer it waits, the closer you get to needing flue relining (replacing the inner liner that channels smoke safely out of the house). If the camera shows a clean flue and an intact cap, we’ll tell you that too, and tell you what the next 12 months actually require: usually just a straightforward sweep the following fall.
Trusted Brands We Service in Franklin
We install and work with professional-grade chimney materials that homeowners can verify independently: DuraFlex stainless steel liners for relining, Olympia Chimney caps and dampers, and Copperfield chase covers and flashing components. When a Franklin home needs a replacement cap or a new top-sealing damper, our stock typically covers the common sizes for both masonry and factory-built units, so we’re not waiting a week for a part to ship. The material choice is specified by job, not by margin; a clay flue downtown and a metal chimney in Westhaven need different hardware, and the written quote names exactly what we’re installing.
Common Chimney Sweep Problems We See in Franklin Homes
- Third-degree creosote in 1920s brick fireplaces. The smoke chambers in Franklin’s older downtown homes have ledges and irregular surfaces where creosote hardens into a fuel glaze that hand brushes alone won’t remove. We catch this with the camera before recommending a chemical treatment or rotary cleaning.
- Failed caps and bird nests in newer subdivisions. Factory-built metal fireplaces in communities off Cool Springs Boulevard and Highway 96 use chimney caps that corrode at the seams over 15 – 20 years. A loose or missing cap invites birds and squirrels, and a nest blocking the flue sends carbon monoxide back into the house.
- Cracked crowns and spalling mortar. Franklin’s freeze-thaw cycles push water into hairline cracks in the concrete crown atop masonry chimneys, and the expansion splits both the crown and the brick below. Once water reaches the flue liner, the repair bill moves from a simple crown seal into a relining conversation.
- Rusted dampers that won’t open. A damper that seizes in the closed position means the fireplace hasn’t run in years, but it also means the flue hasn’t been inspected either. Replacing a rusted damper on an older Franklin fireplace is typically a couple hundred dollars; ignoring it usually means discovering a cracked flue liner on the next inspection.
Pricing for Chimney Sweep in Franklin, TN
A standard chimney sweep in Franklin runs $189 – $320. A combined fireplace cleaning and sweep runs $239 – $350. A camera-scoped Level 2 inspection typically adds $75 – $125 to the sweep, and that includes the photo report. Those are the ranges for most single-story and two-story chimneys in Franklin, assuming a liner that’s in serviceable condition. If the scope uncovers significant creosote glaze requiring chemical treatment, a damaged cap, or a cracked crown, those are separate line items on the written quote, each with its own flat price. You’ll approve it before we do it. Estimates are free, and there’s no charge for the phone conversation that decides whether a sweep is even necessary. Call (830) 251-4560 and tell us the home’s age and chimney type; we’ll give you a ballpark number right then.
We Also Serve Cities Near Franklin
Our Franklin crews also cover Brentwood, Nolensville, Fairview, and Spring Hill. If you’re just over the county line in any of those towns, the same written pricing, camera inspection, and 365-Day Done Right Promise apply. One phone call handles scheduling for the entire area. Call (830) 251-4560.
Serving Franklin, TN - Our Local Coverage Area
We’re based in the Franklin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Franklin
A wood-burning fireplace used regularly in Franklin needs a sweep every 12 to 18 months, or roughly once per 40 – 60 fires. Homes in the historic district with older masonry chimneys tend to accumulate creosote faster because the smoke chambers have more surface area and tighter draft characteristics than modern metal flues. If you only burn on holidays and the occasional January weekend, every two to three years may be enough, and the camera inspection will confirm that without guesswork. Call (830) 251-4560 and we’ll ask the right questions to determine what your Franklin chimney actually needs.
Yes, a camera-scoped Level 2 inspection adds $75 – $125 to a Franklin sweep, and it includes a photo report you keep. We scope before and after the cleaning on most jobs because the before-photos show creosote accumulation and the after-photos prove the flue is clean. If your chimney shows signs of past water intrusion or you’ve never had the liner inspected since buying the house, the camera scope is the only way to confirm the flue is structurally intact. Call (830) 251-4560 and we’ll explain what the scope covers and what it costs, before you book.
No, we don’t promise same-day service, and we won’t rush a sweep in Franklin to hit a clock. Chimney cleaning is scheduled work, not an emergency call. During fall and winter, Franklin appointments typically book a week to ten days out. Late spring and summer have shorter waits, and those seasons are honestly the smarter time to schedule anyway, because you’ll beat the October rush and have the fireplace ready before the first freeze. Call (830) 251-4560 and we’ll give you the next available window in Franklin.
First-degree creosote is a dry, flaky soot that brushes off the flue liner easily. Second-degree is a sticky, tar-like glaze that forms when draft is restricted or the fire burns cooler than it should; it usually requires a rotary cleaning or chemical treatment. Third-degree is a hardened, shiny fuel coating that can ignite inside the chimney at roughly 1,000°F, and it’s the leading cause of chimney fires in Franklin homes, particularly in older masonry chimneys with rough flue surfaces. The degree of buildup determines what a Franklin sweep costs and whether a simple brush cleaning is sufficient. Call (830) 251-4560 for an exact quote once we see your chimney.
Yes, but for different reasons than an old house. A factory-built metal fireplace in a Franklin subdivision built after 1995 is not accumulating the same creosote load as a 1920s brick flue, but those systems have their own failure points: corroded caps, nested animals, and flashing leaks. We inspect and clean them the same way we’d inspect an older masonry chimney, but the problems we’re looking for are different. A newer Franklin home that burns regularly still needs an annual inspection and a sweep every one to two seasons, because even stainless liners develop deposits that restrict draft. Call (830) 251-4560 and we’ll quote a Franklin inspection for your specific system.
If you’re ready to book a Chimney Sweep in Franklin, or you just want a straight answer on whether your fireplace is safe to use this winter, call (830) 251-4560. A live person answers, and you’ll get a written price before any work is scheduled. Franklin homes across the historic district, Cool Springs, Westhaven, and the surrounding areas are covered by the same guarantee: 365 days, in writing, and a free return visit if a covered repair fails.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Franklin, TN as part of the Garrison Partners family since 2002.





Before
After
Before
After
Before
After