Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Sweep Across Murphy
A standard chimney sweep in Murphy, TX typically runs $189 – $289, and includes a full flue brushing, firebox cleanup, and a camera inspection with a written photo report. Most Murphy jobs take 60 to 90 minutes from the time our tech rings the bell to the time the invoice is in your hand. If you’re in Murphy and need a sweep booked, call (830) 251-4560 and you’ll get a live person, not a voicemail tree.
We know Murphy’s neighborhoods. FM 544, Rolling Ridge, Maxwell Creek, and the newer subdivisions off North Murphy Road all have their own patterns when it comes to fireplace use and flue wear. Our crews work this area weekly, and we schedule around your day, not ours.
Why Flint Chimney Sweep Is Murphy’s Preferred Chimney Sweep Company
Murphy homeowners call us because we put the price in writing before a single tool comes off the truck. No estimate that “adjusts” once the tech gets on the roof. No surprise line items. The number you approve before we start is the number on the invoice. That’s the Garrison Standard, and it applies to every job we do in Murphy, from a basic sweep to a full flue relining.
Our techs are background-checked and uniformed. When you book a sweep in Murphy, you’ll know exactly who’s walking through your door, and they’ll arrive inside the window we give you. Hank Delano runs this operation with one rule: do the work right, document it, and stand behind it. Every repair we make in Murphy carries a written 365-Day Done Right Promise. If a covered repair fails inside a year, we return at no charge. No argument, no re-quote.
The phones are staffed by a live person 24/7. Most Murphy customers book their sweep on the first call, get a written confirmation, and have the job done that week.
Chimney Maintenance in Murphy
Chimney Maintenance in Murphy means something specific here: a yearly sweep plus a visual check of the flue liner, damper, chimney cap, and firebox, documented with camera photos you can keep. In Murphy’s newer subdivisions, where most fireplaces are factory-built units with metal flue systems, maintenance is less about repointing brick and more about confirming baffles, gaskets, and clearances are still doing their job. A standard maintenance visit in Murphy runs $189 – $289 depending on flue length and how much creosote or debris has accumulated. Half the time, the issues we find are things the homeowner never saw: a rusted damper plate, a cracked flue tile, a chimney cap that’s lost its screen.
Annual Sweep and Firebox Cleaning
Every fireplace in Murphy that gets used should be swept once a year, even if it burns manufactured logs. This is the base level of Chimney Maintenance. We brush the flue, vacuum the firebox, remove ash and soot, and inspect the damper action by hand. The goal is a fireplace that drafts correctly and a flue surface that isn’t holding fuel.
Creosote and Soot Removal
Creosote builds in stages. First-degree is loose soot, easy to brush. Second-degree is flaky and crusted. Third-degree looks like glazed tar and can’t be brushed off without rotary tools or chemical treatment. In Murphy, we see a lot of second-degree buildup because humid air helps creosote bond to the flue wall. Removing it properly matters: creosote is flammable, and fluffy or glazed creosote is what feeds a chimney fire.
Chimney Sweep Services in Murphy
Chimney Sweep Services in Murphy cover everything from a basic flue brushing to a complete teardown of the firebox for a deep clean. A standard sweep here runs $189 – $289. If the job involves a factory-built fireplace with a metal flue, we work with the manufacturer’s clearances and baffle design, not against them. That’s the difference between a sweep that actually cleans the system and one that just pushes dust around. Every sweep includes a camera inspection and a written photo report emailed to you before our tech leaves the driveway.
Fireplace Cleaning and Draft Correction
A fireplace that smokes into the room usually has a draft problem, not dirty glass. The cause is often a stuck damper, a blocked flue, or a chimney cap that’s clogged with nesting material. In Murphy, we find the damper issue constantly, especially on homes where the fireplace sat unused for a season or two. Humidity rusts the pivot points, the damper plate seizes, and the draft collapses. We fix the mechanical issue, then sweep the flue so the system works as a system.
Chimney Cap Repair and Replacement
Missing or damaged chimney caps are a repeated problem in Murphy, particularly for homes near open fields and greenbelts. Birds and squirrels get into the flue, build nests, and the blockage sends carbon monoxide back into the house with no visible smoke. We replace caps with stainless steel units sized to your flue, and we check the spark arrestor mesh so it actually arrests sparks.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Murphy
We install and work with DuraFlex flue liners, HeatShield resurfacing compound, and Copperfield chimney caps. These are the brands we specify by job, not by margin. When a Murphy homeowner needs a new liner or a smoke chamber repair, we use a product matched to the specific flue dimensions and appliance type, and we document it in the photo report. Because we stock common parts and materials in our DFW inventory, most Murphy jobs don’t wait on shipping. The part is on the truck or at the supply house the same week.
Common Chimney Sweep Problems We See in Murphy Homes
- Factory-built fireplaces treated as maintenance-free. Murphy’s rapid development over the last few decades means thousands of homes went up with factory-built fireplaces and metal flue systems. Homeowners assume “no brick, no maintenance.” That assumption is wrong. These units have baffles, gaskets, and clearances that need yearly inspection. Creosote builds in them just as fast as in masonry flues.
- Stuck or rusted dampers. Murphy’s humidity takes a toll on damper hardware. The plate seizes half-open or fully closed, the homeowner burns with restricted draft, and the smoke chamber collects second-degree creosote. This is one of the most common findings on our camera inspections in Murphy.
- Animal nests in flues near open fields and greenbelts. Homes on the edge of Murphy, near undeveloped acreage or creek beds, get more animal intrusion. Squirrels, birds, and raccoons find an uncapped flue out of the wind. The nest blocks the flue, and the first sign is often a carbon monoxide detector going off, not a visual problem.
- Chimney cap damage from North Texas storms. Hail and high wind take out chimney cap screens and lids. A dented or dislodged cap lets rain into the flue, which accelerates rust on the damper and flue liner. We see this pattern in Murphy after every severe storm season.
Pricing for Chimney Sweep in Murphy, TX
A standard chimney sweep in Murphy runs $189 – $289 for a single-flue fireplace with normal creosote buildup. The flue length, firebox condition, and whether the chimney has a cap that needs replacement are the main price drivers. A sweep plus a Level 2 camera inspection adds $89 – $129. If we find a cracked flue tile or smoke chamber damage requiring HeatShield resurfacing, we quote that separately before any of that work begins, in writing. You approve the number or you don’t. Either way, the estimate is free, and the camera photos are yours. Call (830) 251-4560 and we’ll give you a firm price before we book the appointment.
We Also Serve Cities Near Murphy
Our crews cover the full DFW metro and beyond. If you’re in Dallas, Fort Worth, Houston, or San Antonio and need a Chimney Sweep, the same flat-price promise and 365-Day Done Right Promise applies. We coordinate dispatch from our DFW office, so Murphy jobs are scheduled locally. See our Chimney Sweep in Murphy page for the specifics on how we operate in this area.
Serving Murphy, TX - Our Local Coverage Area
We’re based in the Murphy area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Murphy
Once a year if you burn wood or manufactured logs at least a few times per season. If you burn more than twice a week during winter, sweep it twice a year. The honest answer for Murphy homes is this: if you have a factory-built fireplace, the flue is smaller and tighter than a masonry chimney, so creosote accumulates faster relative to flue diameter. Annual sweeping is the minimum that keeps the system safe and drafting right. Call (830) 251-4560 to schedule your sweep and we’ll give you a written price before booking.
Third-degree creosote is a hardened, glazed tar layer that forms when second-degree creosote is heated repeatedly without removal. No, you cannot brush it off with a standard wire brush. Removing it requires rotary tools, chemical treatment, or both. If we find third-degree creosote in your Murphy chimney, we’ll show you the camera footage, explain the removal process, and give you a written price for the additional work before we start. Nothing gets done that you haven’t approved in writing.
We don’t guarantee same-day service. Our crews run scheduled routes through Murphy and the surrounding DFW suburbs, and we book jobs sequentially, not on demand. What we do offer is a firm appointment window and a written price before the tech arrives. If you have an urgent situation, like a suspected flue blockage or a carbon monoxide detector reading, call (830) 251-4560 and we’ll assess whether it’s an emergency or something that can safely wait a few days. We won’t tell you to panic.
Yes, and this is where a lot of Murphy homeowners get burned by generic chimney companies. Factory-built fireplaces have metal flue systems with tight clearances, baffles, and manufacturer-specific design limits. A brute-force masonry cleaning can damage the flue or the firebox. We sweep these systems with brushes sized to the manufacturer’s specifications, and we inspect the baffle and gasket condition as part of every job. If you have a factory-built fireplace, tell the dispatcher when you call so we send the right tech with the right equipment.
A full sweep includes brushing the flue from top to bottom, vacuuming the firebox and smoke chamber, cleaning the damper assembly, and removing all soot and creosote debris. The inspection portion includes a camera run through the flue, a visual check of the chimney cap, and a photo report emailed to you showing the before-and-after condition of the flue liner. If we find damage, we document it with photos and give you a written repair quote. You decide what happens next. The report is yours regardless.
If you need a chimney sweep in Murphy, call (830) 251-4560. You’ll talk to a live person, get a written price, and we’ll put it in writing before the tech ever starts the truck.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Murphy and the DFW metro area since 2002 as part of the Garrison Partners family.