Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Sweep Across Myrtle Beach
A standard chimney sweep in Myrtle Beach typically runs $189 – $289, and a fireplace cleaning with a Level 1 inspection usually lands between $229 and $349. Most jobs take 60 to 90 minutes, and we schedule within a few days of your call. Flint Chimney Sweep has been part of the Garrison Partners family since 2002, running under The Garrison Standard: a written price before any tool comes off the truck, background-checked uniformed technicians, and a 365-Day Done Right Promise on every repair. Call (830) 251-4560 for a free estimate.
But Myrtle Beach is not Columbia or Florence. The salt-laden onshore air here changes what fails on a chimney and how fast. Homeowners off Ocean Boulevard, in Market Common, and along Shore Drive ask us the same question: why does everything metal on my chimney rust so fast? The answer is the Atlantic, and it dictates how we inspect, clean, and handle Chimney Repair - Myrtle Beach across the Grand Strand.
Why Flint Chimney Sweep Is Myrtle Beach’s Preferred Chimney Sweep Company
We work the way Myrtle Beach homeowners expect a trade crew to work: show up inside the window, put the price in writing first, and leave the hearth cleaner than we found it. Our Chimney Sweep team operates under The Garrison Code, which means every job gets a written scope and price before work begins. That number is the number on your invoice. No adjuster call, no surprise line item, no “while we’re here” upsell.
Hank Delano leads our Myrtle Beach crews. He has seen what a decade of salt spray does to flashing and caps, and he specifies materials accordingly. When a Myrtle Beach homeowner books a sweep, the technician who arrives is uniformed, background-checked, and knows which coastal failure modes to look for before they become a four-figure repair.
Our response time to Myrtle Beach neighborhoods is consistent because we schedule dedicated routes along Highway 17, covering Carolina Forest, The Market Common, Grande Dunes, and the streets off Kings Highway. One call to (830) 251-4560 gets a live person, day or night. Not a voicemail tree.
Fireplace Cleaning in Myrtle Beach
Fireplace Cleaning in Myrtle Beach means more than removing soot. It means clearing salt-crusted ash, inspecting the firebox for spalled brick, and checking that the damper still seats correctly after months of humid coastal air. A standard fireplace cleaning here runs $189 – $289, and we include a visual check of the firebox, damper, and hearth in that price.
Creosote Removal
Creosote builds differently in Myrtle Beach than it does inland. The humidity softens first-degree creosote, letting it soak deeper into the flue liner before it hardens. When that happens, a normal brush pass won’t cut it. We use rotary loops and chemical treatments for glazed, third-degree creosote, which is the kind that fuels chimney fires. Expect to pay between $249 and $399 when heavy creosote removal is needed.
Annual Sweep
An Annual Sweep in Myrtle Beach should happen every year, even if you only burn from Thanksgiving to February. The salt air is the reason. A capped, idle chimney still takes on coastal moisture, and that moisture mixes with creosote residue from last season. The result is an acidic paste that eats at masonry and mortar joints. For $189 – $289, you stop that cycle before it starts.
Chimney Services in Myrtle Beach
Chimney Services in Myrtle Beach cover the full stack: crown, cap, flashing, liner, damper, and firebox. A Level 1 Inspection runs $149 – $229 when booked with a sweep. A Level 2 Inspection, which we recommend after any storm season blow or before a home purchase near the water, runs $299 – $449 and includes camera work inside the flue.
Level 1 and Level 2 Inspections
A Level 1 Inspection checks the readily accessible parts of the chimney and confirms basic soundness. In Myrtle Beach, we treat it as a corrosion check. A Level 2 Inspection goes further, with a camera fed up the flue to inspect the liner, the smoke chamber, and the connection to the appliance. If you live within a half-mile of the ocean, we recommend a Level 2 every two years, even if you rarely burn.
Crown and Cap Assessment
This is where Myrtle Beach chimneys fail first. Galvanised caps rust at the mounting tabs within two to four years of salt exposure. Crowns spall from freeze-thaw and salt spray, opening hairline cracks that channel rainwater straight into the flue. We inspect these components on every visit and quote stainless replacements when corrosion has started. A stainless cap installed typically runs $275 – $475; a crown reseal or rebuild runs $400 – $900 depending on exposure.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Myrtle Beach
We stock and install stainless caps, flashings, and liners from Olympia Chimney and Copperfield, and we specify DuraFlex for flue relining work. Those are not generic hardware-store parts. They’re coastal-grade stainless components built to hold up against salt spray, and we keep common sizes stocked for Myrtle Beach jobs so a corroded cap doesn’t mean a two-week wait. When you schedule a Chimney Sweep in Myrtle Beach call, the parts we quote are the parts we install, named on the written estimate.
Common Chimney Sweep Problems We See in Myrtle Beach Homes
- Rusted-out galvanised caps: This is the number one call we get from homeowners near Ocean Boulevard and Shore Drive. The mounting tabs corrode through, the cap rattles or lifts off, and rain gets straight into the flue. Replacement with stainless is the fix, not another galvanised cap.
- Spalled chimney crowns: The crown, the concrete slab that seals the top of the masonry stack, cracks under salt spray and freeze-thaw. Once water penetrates, the flue liner and smoke chamber start absorbing it. Resealing costs a few hundred; replacing a liner after years of neglect costs thousands.
- Loose flashing at the roofline: Coastal wind drives rain sideways against the stack, and when the flashing pulls loose, water tracks down into the smoke chamber. We caught exactly this on a home off Ocean Boulevard, where the flashing had separated from the stack and rust streaks ran down the brick. Reseal and stainless replacement fixed it the same day.
- Third-degree creosote glazing: After a heavy winter of fireplace use, Myrtle Beach flues often carry a hard, shiny creosote glaze. It looks like tar, it burns like fuel, and a standard brush won’t remove it. We use rotary heads and chemical treatments, and we tell you plainly if the flue is at risk before we start.
Pricing for Chimney Sweep in Myrtle Beach, SC
Here is what you should expect to pay in Myrtle Beach for the most common jobs. A standard chimney sweep: $189 – $289. Fireplace cleaning with Level 1 inspection: $229 – $349. Third-degree creosote removal: $249 – $399. Level 2 inspection with camera: $299 – $449. Stainless cap replacement: $275 – $475. Crown reseal or rebuild: $400 – $900. Flue relining: quoted per job, never without camera evidence we show you first. Every estimate is written, free, and fixed before work begins. Call (830) 251-4560 and you’ll have a number you can hold us to.
We Also Serve Cities Near Myrtle Beach
Our Myrtle Beach routes extend south along Highway 17 to Charleston, where the same salt-air corrosion logic applies, just with older housing stock in the mix. If you own a home in the Lowcountry and you’re seeing rust streaks or hearing a rattling cap, the same written-price standard applies. Call (830) 251-4560 and we’ll schedule a route visit.
Serving Myrtle Beach, SC - Our Local Coverage Area
We’re based in the Myrtle Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Myrtle Beach
Every year. In Myrtle Beach, an annual Level 1 inspection is justified even with zero burn hours because salt air corrodes caps, flashing, and crowns on its own schedule. A $149 – $229 annual check catches a $400 stainless cap replacement before it becomes a $2,000+ liner and smoke chamber repair. Call (830) 251-4560 to book one; the estimate is free.
Because the onshore wind carries salt spray that eats galvanised steel in a few years, not a decade. Galvanised caps that hold up fine in Columbia fail in Myrtle Beach within two to four years. The fix is stainless, which is why stainless is our default replacement, not an upgrade. A stainless cap on a coastal chimney typically runs $275 – $475 installed.
Third-degree creosote is hard, glazed, tarry buildup that forms when creosote is repeatedly heated and condensed. A standard brush cannot remove it, and it is concentrated fuel for a chimney fire. Myrtle Beach humidity makes first-degree creosote absorb deeper before hardening, which pushes more chimneys into third-degree territory after a single burning season. Removal here costs $249 – $399, roughly $40 – $80 more than a standard sweep because of the rotary head and chemical work involved.
Yes, and it usually does it in that order. Salt spray and freeze-thaw crack the crown first, opening paths for water to reach the flue liner and smoke chamber. Once water gets into the smoke chamber, the mortar and parge coating start to degrade. A crown reseal at $400 – $900 is a fraction of the cost of smoke chamber rebuild or liner replacement, which is why we flag crown cracks on every Myrtle Beach inspection.
Stainless, always, on Myrtle Beach chimneys. We stock and install Olympia Chimney and Copperfield stainless caps and flashing, and we specify DuraFlex stainless liners for relining work. Galvanised parts are cheaper initially but fail in the salt air in a few years. We’ll quote you both if you want the comparison, but our written recommendation on coastal work is stainless.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Myrtle Beach as part of the Garrison Partners family of chimney service companies.