Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Company in Ellicott City, MD
Chimney cleaning in Ellicott City, MD typically runs $189 – $289 for a standard sweep, with inspections and repairs priced separately depending on what the camera finds. We’re Flint Chimney Sweep, and our Ellicott City crews handle everything from routine sweeps to full flue relining. The homes here, from historic stone builds off Main Street to 1980s colonials in Dorsey’s Search, put real demands on a chimney system. Call (830) 251-4560 for a written quote before any work begins.
Why Ellicott City Homes Are Different
Ellicott City’s housing stock spans two centuries, and that changes how we approach every job. The older homes along Frederick Road and around the historic district often have unlined or clay-tile flues built long before modern code existed. Moisture from Maryland’s humid summers and freeze-thaw cycles in winter works into those tiles, causing cracks and spalling that a basic sweep will expose but not fix.
Terrain matters too. Ellicott City sits in the Patapsco River valley, which means many chimneys are set on sloped lots with steeper roof pitches than you’d find in flatter parts of Howard County. That affects staging, ladder setup, and how long an inspection takes. Homes in neighborhoods like Font Hill, Dunloggin, and Burleigh Manor tend to be mid-century construction or newer, but they still deal with Maryland’s creosote-heavy burning conditions. The Patapsco Valley also holds damp air against masonry longer than homeowners expect, which accelerates liner wear.
If your neighborhood has an HOA with rules about exterior work, a repair quote from us will note any visible work that might trigger architectural review. We can’t waive HOA requirements, but we’ll tell you plainly if a job is minor enough that no filing is likely needed.
Our Main Ellicott City Services
Ellicott City homeowners call us most for two things: seasonal sweep-and-verify work, and the repair follow-up after an inspection uncovers a liner or flashing problem.
Chimney Sweep in Ellicott City
A chimney sweep in Ellicott City means removing creosote and debris from the flue, smoke shelf, and firebox, then running a visual check on the liner and cap. Homes in Ellicott City that burn wood through shoulder seasons often build glazed creosote faster than most expect, because fires are run lower and slower when mornings are cool but afternoons warm. We take a shop-vac approach that keeps soot out of your living room, and every sweep comes with a written condition report. Chimney Sweep in Ellicott City
Chimney Inspection in Ellicott City
We run camera inspections up the flue on every Ellicott City inspection job, not just when something looks wrong. That means you see exactly what we see, on screen, before anyone recommends work. Given the freeze-thaw cycles that hit this region’s older masonry, a Level 2 inspection is the minimum we recommend for any Ellicott City home that’s changed ownership or gone more than a few years without a service call. Chimney Inspection in Ellicott City
Chimney Repair in Ellicott City
When an Ellicott City inspection turns up damage, repair work is quoted line by line before we start. Common jobs include flue relining with HeatShield or DuraFlex, flashing replacement around the roofline, and crown sealing. In Ellicott City’s older housing stock, we also see a fair amount of firebox rebuilding. Every repair carries our written 365-Day Done Right Promise: if a covered repair fails within a year, we return at no charge. Chimney Repair in Ellicott City
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Ellicott City
Our Ellicott City crews work with professional-grade materials including HeatShield resurfacing systems, Gelco caps and dampers, and Olympia Chimney liners. Parts for common jobs are stocked locally, so most repair work doesn’t wait on a shipment. See our brands for specifications on what we install and why.
Pricing for Chimney Company in Ellicott City, MD
These are the ballpark ranges we quote in Ellicott City. Every job gets a written price before we start, and the number you approve is the number on the invoice.
| Service | Typical Range in Ellicott City |
|---|---|
| Standard chimney sweep | $189 – $289 |
| Level 1 chimney inspection | $149 – $249 |
| Level 2 camera inspection | $299 – $499 |
| Flue relining (typical single-flue) | $2,500 – $5,000 |
| Chimney cap installation | $350 – $750 |
| Flashing repair or replacement | $450 – $1,200 |
| Crown repair | $300 – $800 |
| Firebox repair | $600 – $2,500 |
| Creosote removal (heavy buildup) | $350 – $700 |
| Glazed creosote removal | $500 – $1,200 |
Prices in Ellicott City trend toward the upper end of those ranges on older homes with hard-to-access chimneys or steep roof pitches. You’ll get a flat written price before we touch the roof, so there isn’t a surprise with the final invoice.
Neighborhoods We Serve in Ellicott City
We cover all of Ellicott City and the surrounding Howard County area. Our dispatchers coordinate crews from our Washington, DC office, so scheduling is handled centrally while a local crew does the work at your home.
- Dorsey’s Search
- Font Hill
- Dunloggin
- Burleigh Manor
- Historic District / Main Street
Response time across Ellicott City is typically same-week, with inspections and sweeps prioritized ahead of the burning season.
Service Area – Cities Near Ellicott City
Our crews also cover the surrounding communities, so if you’re in Columbia, MD, Fulton, MD, Savage, MD, or Jessup, MD, the same written pricing and guarantee applies. A standard sweep in those areas runs the same $189 – $289 range.
Serving Ellicott City, MD - Our Local Coverage Area
We’re based in the Ellicott City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Ellicott City
Most Ellicott City homes are scheduled within the same week, and routine sweeps are prioritized ahead of fall and winter. If a camera inspection turns up immediate risk, we’ll tell you plainly on the spot and can usually get a repair crew back out within days.
Most sweeps, inspections, and minor repairs do not require a permit in Howard County. Larger repairs like flue relining or structural work may need one. We’ll check the current local requirement for your specific job and tell you before any work is scheduled.
Homes with two flues, common in older Ellicott City builds, get priced per flue, not per chimney. We’ll walk you through exactly which flue serves which appliance and quote each line separately, so you can decide what’s necessary and what can wait.
For a free, written estimate in Ellicott City, call (830) 251-4560. A live person answers, day or night.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Ellicott City Customers Say
"Full inspection with a camera. Found a cracked flue tile and quoted the repair clearly. Did not push."
- Lydia C."Great sweep. Only thing, the appointment window ran long and I waited. Cleanup was spotless though."
- Marge P."Sweep showed up on time, in uniform, and ran a tight job. Cleaned the flue, inspected the firebox, and gave me a short written report. Veteran-run and it shows."
- Walt R.