Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Company in Glen Burnie, MD
A chimney sweep in Glen Burnie, MD typically runs $189 – $279 for a standard cleaning, and most inspections fall between $149 – $249 depending on the level of detail. Flint Chimney Sweep handles all three core jobs – sweeping, inspection, and repair – under one written price before any work starts. If you’re seeing soot buildup, smelling smoke inside the house, or just haven’t had the flue looked at in a few years, call (830) 251-4560 and you’ll get a live person who can schedule you.
Why Glen Burnie Homes Are Different
Glen Burnie’s housing stock runs older than a lot of Anne Arundel County, and that shapes most of the chimney work we see here. Homes off Ritchie Highway and around the older sections near the center of Glen Burnie were largely built between the 1940s and 1970s, which means a lot of masonry chimneys with clay tile liners that have been absorbing Maryland’s freeze-thaw cycles for fifty years or more. The winter weather in this part of Maryland isn’t brutal, but it cycles enough – nights below freezing followed by warmer days – to work on mortar joints and clay tiles. A hairline crack in a clay liner that never mattered ten years ago becomes a place where creosote collects and heat escapes.
We also work across newer construction in Glen Burnie’s outlying developments, where factory-built chimneys and prefab flues are more common than traditional masonry. Those systems have their own failure points: warped metal liners, loose chase covers, and improperly installed flashing. The one constant across Glen Burnie is that chimneys here get used seasonally, not constantly. Wood-burning fireplaces run hard from late fall through early spring, then sit unused for months – and that sitting period is when moisture works into whatever damage already exists. A chimney that performed fine in February can be a problem by the time you’re ready to burn again in November.
Our Main Glen Burnie Services
Most Glen Burnie homeowners reach out to us for one of two reasons: they need a chimney swept before burning season, or they’ve already spotted something that worries them and want a real inspection. Each service has its own dedicated page below.
Chimney Sweep in Glen Burnie
A Chimney Sweep in Glen Burnie removes the creosote and soot that accumulate every time you burn wood. Creosote is the black, tar-like residue left behind by incomplete combustion, and it’s the fuel source for chimney fires. In Glen Burnie, where fireplaces often sit unused from April through October, that residue hardens and becomes more difficult to remove than the fluffy soot you’d find in a chimney that’s cleaned mid-season. We use rotary brushes and vacuums with HEPA filtration, so the work is contained and your living room stays clean. Every sweep includes a visual check of the accessible flue as part of the same visit.
Chimney Inspection in Glen Burnie
A Chimney Inspection in Glen Burnie documents the condition of the entire system – flue liner, smoke chamber, damper, crown, flashing, and masonry – using a camera when the situation calls for it. This matters in Glen Burnie specifically because so many homes have changed hands through the years without a chimney ever being professionally evaluated. A Level 1 inspection is the right fit when nothing has changed and you just want a baseline. A Level 2 inspection is what we recommend before you list a home, after you buy one, or after any event that might have affected the chimney, like a chimney fire or major storm. You receive a written report with photos, and if we find something, we show it to you on the screen before we ever quote a repair.
Chimney Repair in Glen Burnie
Chimney Repair in Glen Burnie covers everything from tuckpointing cracked mortar joints to rebuilding a damaged crown to flue relining – that’s replacing the inner liner that channels smoke and heat safely out of the house. Glen Burnie’s older clay tile liners are the most common repair we quote, and if the damage is confined to a section rather than the full height, HeatShield’s cerfractory material can resurface the damaged area without a full liner replacement. Every repair we quote in Glen Burnie carries a written guarantee that’s valid for one full year from the service date. If a covered repair fails within that year, we return at no charge.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Glen Burnie
The chimney and venting systems in Glen Burnie run on a mix of brands depending on home age and builder. We work on and install Famco caps and dampers, Copperfield chimney products, DuraFlex liners, and HeatShield repair materials. Parts are sourced locally where possible to keep turnaround reasonable. See our brands for the full list and why we specify each one by job.
Pricing for Chimney Company in Glen Burnie, MD
| Service | Typical range in Glen Burnie |
|---|---|
| Standard chimney sweep | $189 – $279 |
| Chimney sweep with creosote treatment | $229 – $319 |
| Level 1 chimney inspection | $149 – $249 |
| Level 2 chimney inspection (camera) | $249 – $399 |
| Tuckpointing (per 10 sq ft) | $350 – $650 |
| Crown repair | $300 – $600 |
| Flue relining (partial, HeatShield) | $1,200 – $2,500 |
| Flue relining (full, stainless) | $2,500 – $5,500 |
| Chimney cap supply and install | $250 – $500 |
| Damper replacement | $350 – $750 |
What pushes a Glen Burnie job toward the top of these ranges is access and access alone: a steep roof pitch, a chimney that sits a long way from the ladder set-up point, or a flue that’s taller than typical two-story height. The price you approve is the price you pay – every job in Glen Burnie gets a written quote before any tool comes off the truck, and there’s no re-quoting at the door.
Neighborhoods We Serve in Glen Burnie
We run calls across the entire Glen Burnie area, and response time is generally same-week depending on season. Burning season, which runs October through January, books out faster than spring and summer.
- Tanyard Springs
- Sun Valley
- Harundale
- Ferndale
- Cromwell Fountain
Service Area – Cities Near Glen Burnie
Beyond Glen Burnie, our crews cover the surrounding Anne Arundel County communities. We work regularly in Pasadena, MD, Severna Park, MD, Severn, MD, and Dundalk, MD. If you’re on the edge of Glen Burnie and aren’t sure whether we cover your street, call and ask – someone will tell you straight rather than write down a lead with no follow-through.
Serving Glen Burnie, MD - Our Local Coverage Area
We’re based in the Glen Burnie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Glen Burnie
Most Glen Burnie calls are scheduled within the same week, and outside of the October-to-January rush, it’s often sooner than that. If you have a specific date in mind, tell the dispatcher and we’ll work to that rather than giving you a four-hour window that no one actually keeps.
Routine sweeping and inspection require no permit anywhere in Anne Arundel County. Structural repairs like flue relining, crown rebuilding, or any masonry work generally fall under existing-home maintenance and typically don’t require a separate county permit, but we’ll confirm the specifics for your job before any work is scheduled.
Yes. We serve the full Glen Burnie area, including the neighborhoods off Ritchie Highway, Baltimore-Annapolis Boulevard, and the residential streets extending toward the county line. If you’re in Glen Burnie, you’re in our service area. Call (830) 251-4560 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Glen Burnie Customers Say
"Full inspection with a camera. Found a cracked flue tile and quoted the repair clearly. Did not push."
- Lydia C."Great sweep. Only thing, the appointment window ran long and I waited. Cleanup was spotless though."
- Marge P."Sweep showed up on time, in uniform, and ran a tight job. Cleaned the flue, inspected the firebox, and gave me a short written report. Veteran-run and it shows."
- Walt R.