Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Company in Kirby, TX
Flint Chimney Sweep is the chimney company Kirby homeowners call when they want a written price before any work starts and a guarantee that actually means something. We sweep, inspect, and repair chimneys across Kirby, TX, and we put every commitment in writing under The Garrison Standard. If you need a Chimney Sweep in Kirby, an inspection, or a repair, call (830) 251-4560 and a live person answers, day or night.
Why Kirby Homes Are Different
Kirby sits just northeast of San Antonio, and its housing stock reflects that position: a mix of mid-century ranch homes built in the 1960s and 1970s, plus a few newer subdivisions. Those older homes matter to chimney work because the fireboxes and flues were built before today’s tighter building envelope standards. That means the draft behaves differently, and so does the creosote buildup. We adjust our sweep and inspection process accordingly, and we document everything with photos so you never take our word on blind faith.
Kirby’s climate is another factor. Hot, humid summers put thermal stress on masonry, and the occasional cold snap drives people to use fireplaces they haven’t touched since the previous winter. That cycle – long idle periods followed by heavy use – accelerates creosote accumulation and exposes small cracks before they become visible. The soil here is also known for shifting, which can put hairline stress on chimney footings and stack joints over time. We look for those signs during a standard Kirby sweep.
Our Main Kirby Services
Three services cover almost everything a Kirby homeowner will need, and each belongs on its own page with its own pricing and details. Start with the one that matches your situation, or call and we’ll point you to the right option.
Chimney Sweep in Kirby
A chimney sweep in Kirby means more than running a brush up a flue. We remove creosote, clear debris and any animal nesting, and check for the signs of moisture or corrosion that are common in this area. Kirby’s hot, humid summers and occasional winter cold spells mean chimneys sit idle for months at a time, so we check for settlement cracks and flue glazing that a glance might miss. You get a Chimney Sweep in Kirby with a written before-you-pay price and a 365-Day Done Right Promise on the work.
Chimney Inspection in Kirby
A chimney inspection in Kirby is either a Level 1 check for homes that have had no changes, or a Level 2 when a home has sold, a storm has passed, or the chimney has been modified. In older Kirby homes with decades of use, a Level 2 inspection with a camera is what catches the hidden spalling and flue cracks that a visual check alone can’t. We run the camera, we save the photos, and we tell you what needs action now and what can safely wait. See Chimney Inspection in Kirby for the steps and the price ranges.
Chimney Repair in Kirby
Chimney repair in Kirby runs from minor crown sealing and mortar joint repair to complete flue relining. The repair page covers when a repair can safely be postponed and when it’s a fire or carbon monoxide risk. If a repair is covered under our 365-Day Done Right Promise and it fails within one year, we return at no charge. That’s not a vague promise; it’s written into the work order. Read the full scope on the Chimney Repair in Kirby page, including which brands we specify for liners and crown compounds.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Kirby
We service and install Fluke chimney products including DuraFlex and Copperfield liners, and we specify HeatShield and Famco components where they fit the job. Parts are sourced from our San Antonio supply network, and most are available within a day or two in Kirby. See our brands for the full list.
Pricing for Chimney Company in Kirby, TX
| Service | Typical range in Kirby |
|---|---|
| Standard chimney sweep (Level 1) | $159 – $239 |
| Level 1 inspection | $99 – $159 |
| Level 2 inspection (with camera) | $199 – $329 |
| Chimney crown seal/recoat | $249 – $449 |
| Flue relining (stainless steel) | $2,100 – $3,200 |
| Chimney cap replacement | $149 – $275 |
| Firebox repair / parging | $350 – $800 |
| Animal removal and prevention | $225 – $400 |
The big price movers in Kirby are the age of the flue and whether the chimney has been relined before. Older Kirby homes with original clay flues sometimes need a level of repair that newer homes don’t, and that’s reflected in the estimate – but every estimate is delivered in writing before work begins, so the number you approve is the number you pay.
Neighborhoods We Serve in Kirby
We cover every neighborhood inside Kirby’s city limits and a short buffer outside them. Response time runs about the same across the area – we dispatch from the San Antonio side, so most Kirby homes see us on schedule within one to three business days, depending on the job type.
- Old Town Kirby
- Ridgeview
- Sunrise Acres
- Wheeler Estates
- Kirby Heights
Service Area – Cities Near Kirby
While this page covers Kirby specifically, our schedules also reach homeowners in San Antonio, FL, Houston, TX, Dallas, GA, and Fort Worth, TX. If you’re on the edge of those service areas or unsure which one applies, call and our dispatcher will sort it out in under a minute.
Serving Kirby, TX - Our Local Coverage Area
We’re based in the Kirby area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Kirby
Most Kirby sweeps and inspections happen within one to three business days of your call. Repairs may take longer depending on parts, but we always give you the date and window in writing before any work is approved.
For most single-family Kirby homes, no. If your neighborhood has an active HOA and the repair is structural or visible from the street, it’s worth checking the covenant first. We never require HOA sign-off for a standard sweep or inspection.
We dispatch directly to Kirby from our San Antonio team. That means a uniformed, background-checked Flint technician arrives at your door, not a subcontracted crew. Same company, same guarantee, same written price.
Call (830) 251-4560 for a free estimate on any chimney work in Kirby. Estimates are free, prices are in writing, and a real person answers around the clock.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Kirby Customers Say
"Full inspection with a camera. Found a cracked flue tile and quoted the repair clearly. Did not push."
- Lydia C."Great sweep. Only thing, the appointment window ran long and I waited. Cleanup was spotless though."
- Marge P."Sweep showed up on time, in uniform, and ran a tight job. Cleaned the flue, inspected the firebox, and gave me a short written report. Veteran-run and it shows."
- Walt R.