Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Company in Madera, CA
Flint Chimney Sweep handles chimney cleaning, inspection, and repair across Madera, CA, with written pricing before any work starts and a one-year guarantee on every repair. A standard chimney sweep in Madera typically runs $189 to $319, depending on creosote buildup and roof access. If you’re noticing smoke backing into the house or a smell coming from the fireplace between burns, call (830) 251-4560 and we’ll give you a straight answer.
Why Madera Homes Are Different
Madera sits in the San Joaquin Valley, where winter fog settles low and inversions hold wood smoke close to the ground for days at a time. That means chimneys here work harder during the burn season than they do in coastal climates, and creosote accumulates faster when fires burn low and slow on cold, damp nights. Homes built in Madera between the 1960s and the 1990s often have masonry chimneys with clay tile liners that crack under repeated heating and cooling cycles. We see that pattern constantly in neighborhoods north of Yosemite Avenue and through the older subdivisions off Howard Road.
The summer heat plays a role too. Temperatures above 100 degrees bake roof flashing and crown mortar, opening hairline cracks that let water in during the first real rainstorm of the season. A chimney crown that looks fine in August can be spalling by December. Madera’s flat terrain also means wind isn’t the concern it is in the foothills; instead, the issue is draft performance on still, foggy mornings when atmospheric pressure barely moves. A properly swept and inspected chimney compensates for those conditions, and that’s what we account for on every Madera job.
Our Main Madera Services
Madera homeowners call us most about two things: getting the creosote out before burning season, and verifying a chimney is safe after buying an older home. Repair work comes up often once we get a camera in the flue.
Chimney Sweep in Madera
A chimney sweep removes the creosote and soot that build up inside the flue with every fire you burn. In Madera, the valley’s damp winter air causes creosote to set up harder and faster than it does in drier climates, so we typically see heavier Stage 2 glaze buildup here than in neighboring foothill communities. We brush the full flue, clean the smoke chamber, remove debris from the smoke shelf, and leave the firebox clean before we pack up. Every sweep includes a basic visual condition check, and you’ll get a written report of what we found. Flue access and roof pitch affect the final price, and we confirm that in writing before we start. Chimney Sweep in Madera covers the full process and what to expect.
Chimney Inspection in Madera
An inspection answers one question: is this chimney safe to burn? In Madera, where many homes are 30 to 50 years old, we recommend an inspection before the first fire of any season if the chimney hasn’t been checked in two years or more. We run a camera through the flue from the firebox to the crown, checking for cracked tiles, missing mortar joints, and hidden blockages. You see the footage yourself, so you’re not taking our word on a repair recommendation. It’s the same documentation we use to price any repair we find. Chimney Inspection in Madera explains the different inspection levels and when each applies.
Chimney Repair in Madera
Repair covers everything from crown resealing and flashing replacement to full flue relining. In Madera, cracked clay tile liners are the most common repair trigger, and we specify HeatShield or DuraFlex relining systems depending on the flue’s size and condition. Crown work matters here because valley heat and winter rain combine to degrade mortar quickly once a crack opens. Every repair we quote includes a written scope, a fixed price, and our 365-Day Done Right Promise: if the covered repair fails within a full year, we return at no charge. Chimney Repair in Madera details what repairs typically involve and how we price them.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Madera
We work on all major chimney and fireplace brands across Madera, including HeatShield, Gelco, Olympia Chimney, and Famco components. Our trucks carry common flue parts and mortar materials stocked for valley homes, which means most repair quotes convert to scheduled work without waiting on a parts order. Our brands page lists what we service.
Pricing for Chimney Company in Madera, CA
| Service | Typical Range in Madera |
|---|---|
| Chimney sweep (standard, no major buildup) | $189 – $319 |
| Level 1 inspection | $149 – $249 |
| Level 2 inspection (real estate or camera) | $275 – $450 |
| Chase cover replacement | $425 – $875 |
| Chimney crown repair | $395 – $650 |
| Flue relining (stainless steel) | $2,900 – $4,500 |
| Flue relining (HeatShield) | $2,300 – $3,400 |
| Damper replacement | $225 – $475 |
| Firebox repair or rebuild | $1,200 – $3,100 |
| Flashing repair or replacement | $450 – $850 |
Prices in Madera move based on roof height, flue length, and how much creosote has accumulated. Rusted chase covers and cracked crowns are common on older Madera homes and often push a quote toward the upper end of the range. Whatever the number is, it’s the number you approve in writing before we start, and it’s the number on your invoice when we’re done.
Neighborhoods We Serve in Madera
We run calls throughout Madera and the surrounding unincorporated pockets east and northwest of town. Most of our work comes from established single-family neighborhoods where chimneys have seen 20-plus years of seasonal use, and we know the roof pitches and flue setups in each of them well enough to quote accurately from the first call.
- Downtown Madera and the historic grid around Yosemite Avenue
- The subdivisions north of Howard Road
- Neighborhoods flanking Schnoor Avenue and Cleveland Avenue
- The communities off Avenue 12 and 15 heading east toward the foothills
- Parksdale and the county pockets east of Highway 99
Typical first-visit scheduling in Madera runs 3 to 5 business days, and we confirm a one-hour arrival window the day before.
Service Area – Cities Near Madera
Our Madera crews cover the city and nearby Central Valley communities. We also operate in Fresno, TX, Clovis, CA, Kerman, CA, and Chowchilla, CA. Scheduling and dispatch for the Madera area run through our Fresno, Central Valley office.
Serving Madera, CA - Our Local Coverage Area
We’re based in the Madera area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Madera
Most Madera appointments are scheduled within 3 to 5 business days. We confirm a one-hour arrival window by phone the day before, and our technicians show up inside that window in a marked truck, wearing a uniform and carrying badges. If you need a camera inspection before a real estate closing in Madera, let us know the timeline and we’ll work with it.
Most chimney sweeping and inspection work requires no permit in Madera. Major structural repairs, like rebuilding a firebox or replacing a chimney crown, can trigger a permit through Madera County’s building department depending on scope. We’ll tell you what applies to your specific job before any work begins, and we handle the paperwork when one is needed.
Yes, and we recommend it. Madera’s burn season runs from November through February, and the first foggy cold snap usually creates a rush. Calling in September or October gets you a date before the schedule fills, and your chimney is ready the first evening you want a fire. Call (830) 251-4560 for current availability or an estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Madera Customers Say
"Level 2 inspection before we bought the house. Report was detailed and saved us from a bad surprise."
- Archie M."Full inspection with a camera. Found a cracked flue tile and quoted the repair clearly. Did not push."
- Lydia C."Great sweep. Only thing, the appointment window ran long and I waited. Cleanup was spotless though."
- Marge P.