Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Company in Spanaway, WA
Chimney cleaning in Spanaway typically runs $189 to $340 for a standard sweep, with inspections starting around $149 and repairs quoted only after a camera look at the flue. What makes Spanaway jobs different is the housing mix: 1970s and 1980s ramblers with original masonry chimneys, newer construction with prefabricated pipe, and everything between. We give a written price before any tools come off the truck, so you’ll know the number on the invoice before we start. Call (830) 251-4560 to book.
Why Spanaway Homes Are Different
Spanaway sits in the southern stretch of Pierce County, where winter rains push homeowners to use their fireplaces for months at a time. That season of steady burning loads up flues with creosote faster than occasional use does. Older ramblers in the Spanaway Lake and Elk Plain areas often have interior masonry chimneys that are hard to inspect from the outside, which means real estate inspections routinely miss problems a pro will find once we get eyes on the liner. Newer subdivisions off 176th Street East and Military Road with factory-built fireplaces have a different issue: those units need regular attention from someone who knows the specific brand and pipe configuration, not a general handyman. Pierce County also sits in a moderate seismic zone, and we commonly see cracked mortar joints from years of small shifts. The combination of a long burn season, older brick work, and newer prefab units means Spanaway chimneys rarely get a pass from a sweep without at least one thing worth noting.
Our Main Spanaway Services
Most Spanaway homeowners call us for one of two reasons: a chimney that hasn’t been swept in years, or an inspector flagged something they don’t understand. Here’s how each service works here.
Chimney Sweep in Spanaway
A Chimney Sweep in Spanaway removes the creosote and soot that build up inside the flue during the rainy-season burn months. We tarp off the firebox, run brushes sized to your flue, and vacuum everything out. In older Spanaway homes with interior chimneys, we also check the damper and smoke shelf, two spots where debris collects and blocks draft. Expect about an hour on site for a standard single-flue masonry chimney, and a bit longer for two-story homes or rooflines that need extra ladder setup.
Chimney Inspection in Spanaway
An Chimney Inspection in Spanaway is what you want before buying a home, after a chimney fire, or when you haven’t used the fireplace in years. We run a camera up the flue and give you a written report with photos. That matters in Spanaway because a lot of real estate transactions here move fast, and sellers don’t always disclose flue issues. A Level 2 inspection with camera is the standard for a home sale, and we’ll tell you plainly what needs work now and what can wait.
Chimney Repair in Spanaway
When the inspection turns up cracked tiles, a deteriorated liner, or water staining at the top of the chimney, Chimney Repair in Spanaway is the next call. We quote the repair with the photo evidence in hand, so you’re never approving work on a verbal claim. Every repair we do carries our 365-Day Done Right Promise: if a covered repair fails within a year, we return and fix it at no charge. For Spanaway’s older masonry chimneys, the most common repair is a partial rebuild of the crown followed by sealing, but we won’t know until we look.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Spanaway
We stock and install parts from Famco, Copperfield, and DuraFlex. That means common repair parts are available quickly for most Spanaway jobs rather than ordered in from a catalog and rescheduled. If your chimney has a brand-specific cap, damper, or liner component, our brands page lists what we carry and what we can source.
Pricing for Chimney Company in Spanaway, WA
| Service | Typical range in Spanaway |
|---|---|
| Standard chimney sweep (masonry or prefab) | $189 – $340 |
| Level 1 inspection | $149 – $220 |
| Level 2 inspection (camera) | $250 – $400 |
| Chimney cap supply and install | $120 – $350 |
| Chimney crown repair | $400 – $1,100 |
| Flue relining (stainless liner) | $2,200 – $5,500 |
| Damper replacement | $180 – $500 |
| Chase cover replacement (prefab) | $300 – $900 |
| Waterproofing treatment | $250 – $650 |
| Masonry tuckpointing (per section) | $500 – $1,800 |
Prices in Spanaway move with roof pitch and chimney height. A steep two-story roofline in a subdivision off 152nd Street takes longer to ladder and set up than a single-story rambler near Spanaway Lake. Whatever the job, you’ll get a written price before any work starts, and that’s the price on the invoice.
Neighborhoods We Serve in Spanaway
We run calls across Spanaway all week, and most sweeps and inspections are booked within a few days. You’ll see our trucks in the neighborhoods around Spanaway Lake, Elk Plain, and the newer developments off 176th Street East.
- Spanaway Lake
- Elk Plain
- Military Road corridor
- Areas off 176th Street East
- Pacific Avenue South corridor
Service Area – Cities Near Spanaway
Crews serving Spanaway also run calls in Graham, WA to the south and Puyallup, WA to the north. We cover Orting, WA on the Carbon River side and Lakewood, OH for customers with properties in both markets. Dispatch and scheduling for the area are coordinated from the brand’s Seattle office; crews serve Spanaway locally.
Serving Spanaway, WA - Our Local Coverage Area
We’re based in the Spanaway area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Spanaway
Most sweeps and inspections in Spanaway are booked within three to five business days. Repair work depends on parts, but common caps, dampers, and liners are stocked here and we schedule around your availability, not ours. Call (830) 251-4560 and a live person will give you the next open dates.
Routine sweeps and inspections need no permit. Repairs that alter structure, like a partial rebuild, may need Pierce County review, but that’s uncommon for liners, caps, and crowns. We’ll tell you if a permit applies before you commit to anything.
We cover the entire Spanaway area, from the lake to the county line and up toward the Puyallup border. Scheduling works the same wherever you are: you get a written price, a uniformed technician, and the 365-Day Done Right Promise on any repair.
If your chimney hasn’t been looked at in a few years, call (830) 251-4560 for a free estimate. You’ll talk to a person, and you’ll get a straight answer about what a sweep or inspection should cost in Spanaway.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Spanaway Customers Say
"Full inspection with a camera. Found a cracked flue tile and quoted the repair clearly. Did not push."
- Lydia C."Great sweep. Only thing, the appointment window ran long and I waited. Cleanup was spotless though."
- Marge P."Sweep showed up on time, in uniform, and ran a tight job. Cleaned the flue, inspected the firebox, and gave me a short written report. Veteran-run and it shows."
- Walt R.