Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Company in Tacoma, WA
Chimney cleaning in Tacoma means working with salt air, steady rainfall, and a housing stock that runs from 1900s craftsman bungalows to 1980s hillside builds. Most Tacoma jobs we handle are sweeps and inspections on wood-burning fireplaces in the North End, Stadium District, and Proctor areas, with repairs following once the camera shows what the rain has been doing to the flue. A standard sweep here typically runs $189 to $329, and we put that number in writing before any work starts. Call (830) 251-4560 to get a quote for your chimney.
Why Tacoma Homes Are Different
Tacoma’s winter is wet for months, and that moisture works its way into masonry in ways dryer cities never see. Older chimneys with original clay tile liners absorb water, and when a fire heats the flue, that trapped moisture expands and cracks the tile. We find this pattern regularly in North End and Stadium District homes built before 1950. The damage is quiet at first, but the camera tells the full story.
Homes up in the hills above Ruston and down toward South Tacoma sit on varied terrain, which affects chimney draft and how rainwater drains around the crown. Steeper lots often mean taller chimneys with more exposure to wind off Commencement Bay. That salt air accelerates rust on caps and dampers, so we check those components on every inspection. The city’s mix of cedar-shake and shingle roofs also means our crews carry roof covers on every job to protect your shingles and gutters while we work.
Our Main Tacoma Services
Every chimney in Tacoma eventually needs one of three things: a sweep to clear what’s built up, an inspection to document the condition of the flue, or a repair to fix what the inspection found. Each service has its own Tacoma page with full details.
Chimney Sweep in Tacoma
A sweep removes creosote and soot from the flue so your fireplace drafts correctly and burns safely. In Tacoma’s wet months, birds nest in uncapped flues more often, and rain turns old creosote into a sticky, acidic paste that’s harder to remove than dry buildup. We lay drop cloths, run a HEPA vacuum, and leave your hearth cleaner than we found it. The written price is set before we start, and it’s what you pay. See Chimney Sweep in Tacoma for pricing and what to expect.
Chimney Inspection in Tacoma
An inspection is a camera run through the flue, looking for cracked tiles, gaps in mortar joints, or a damaged liner. After Tacoma’s rainy season, we find more rust on dampers and more spalling brick on exterior chimneys than any other time of year. You get a written report with photos, and we walk you through what the camera shows. If the flue is clean and sound, we say so plainly and tell you to call us next year. See Chimney Inspection in Tacoma for the full breakdown.
Chimney Repair in Tacoma
Most Tacoma repairs come down to two things: water getting in where it shouldn’t, or a liner that’s no longer containing heat and smoke. We repair crowns, replace caps, repoint brick, and reline flues with DuraFlex or HeatShield systems. Every repair carries our 365-Day Done Right Promise in writing: if a covered repair fails within one year, we return at no charge. See Chimney Repair in Tacoma for the repair types and their price ranges.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Tacoma
We install and service the brands Tacoma homeowners already trust, including Olympia Chimney caps and dampers, Famco, Copperfield, and DuraFlex liners. Common components are stocked locally in our crews’ trucks, so caps, dampers, and standard liners usually don’t require a second trip. For the full list, see our brands.
Pricing for Chimney Company in Tacoma, WA
| Service | Typical range in Tacoma |
|---|---|
| Standard chimney sweep (single flue) | $189 – $329 |
| Chimney sweep with heavy creosote buildup | $250 – $380 |
| Level 1 chimney inspection (visual) | $150 – $250 |
| Level 2 chimney inspection (camera) | $300 – $500 |
| Chimney cap installation | $275 – $550 |
| Damper replacement | $250 – $650 |
| Flue relining (per foot) | $90 – $180 |
| Chimney crown repair | $450 – $950 |
| Brick repointing (per square foot) | $25 – $55 |
| Fireplace smoke chamber parging | $600 – $1,200 |
Prices in Tacoma push higher when a chimney is on a steep pitch or the flue has years of hardened creosote that slows the sweep down. Before any work begins, you get a written price, and that’s the number on the invoice. No add-ons, no surprises.
Neighborhoods We Serve in Tacoma
We run crews throughout Tacoma, and they’re in the city most weeks depending on scheduling. Homes in older neighborhoods like the ones below tend to have the original clay tile liners and brick chimneys that need the most attention.
- North End
- Stadium District
- Proctor District
- South Tacoma
- Ruston
Our standard booking window in Tacoma is about 5 to 10 business days from your call.
Service Area – Cities Near Tacoma
Beyond Tacoma, our crews also cover Milton, WA, University Place, WA, Puyallup, WA, and Federal Way, WA for chimney sweeps, inspections, and repairs. If you’re in one of those cities, the same written-price promise and one-year repair guarantee apply. Dispatch and scheduling are coordinated from our Seattle office, and crews serve Tacoma locally.
Serving Tacoma, WA - Our Local Coverage Area
We’re based in the Tacoma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Tacoma
Our standard scheduling window in Tacoma is about 5 to 10 business days from your call. If you have a known leak or a chimney fire, call (830) 251-4560 and we’ll tell you the soonest opening. A live person answers the phone around the clock.
Most sweeps, inspections, and minor repairs like cap or damper replacement don’t require a city permit. Larger structural work, like rebuilding a chimney chase, may. We’ll tell you before any work starts whether a permit applies to your job.
We serve all of Tacoma, including North End, Stadium District, Proctor, South Tacoma, Ruston, and the surrounding Pierce County area. We also cover Milton, University Place, Puyallup, and Federal Way for service calls.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Tacoma Customers Say
"Level 2 inspection before we bought the house. Report was detailed and saved us from a bad surprise."
- Archie M."Full inspection with a camera. Found a cracked flue tile and quoted the repair clearly. Did not push."
- Lydia C."Great sweep. Only thing, the appointment window ran long and I waited. Cleanup was spotless though."
- Marge P.