Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Company in Texas City, TX
Chimney cleaning in Texas City, TX runs $180 – $320 for a standard sweep, with inspections adding $150 – $350 depending on scope, and repairs ranging from $350 for a new cap up to $7,500 for a full flue relining. We put every number in writing before any work starts. This page is the Texas City overview; the three specific services each have their own page linked below. Call (830) 251-4560 when you’re ready to talk specifics.
Why Texas City Homes Are Different
Texas City sits on low, flat ground a few feet above sea level, with the bay to the east and heavy industrial air mixing in from the refineries and docks. That matters for chimneys. The salt-laced air works on metal components year-round – caps, dampers, flashing, and chase tops all corrode faster here than they would twenty miles inland. We see rusted damper assemblies and pitted caps on chimneys that would look fine in other parts of Galveston County.
The housing stock runs older in the neighborhoods near 6th Street and Bay Street, where homes from the 1940s through the 1970s often have original brick or block chimneys that have never been relined. Newer construction west of I-45 and out by the levee tends toward prefabricated chimney systems that have their own failure points, especially where storms have pushed water through the chase covers. Coastal humidity also means we pull more creosote glaze than the same wood-burning habits would produce in a drier climate, because the flue stays damp longer between fires.
Our Main Texas City Services
Most Texas City callers reach out for one of two reasons: they haven’t had the chimney looked at since they bought the house, or they’ve noticed water stains, rust, or flaking brick around the stack. The three services below each run on their own schedule and their own scope.
Chimney Sweep in Texas City
A standard sweep in Texas City means removing accumulated soot and creosote from the flue, then vacuuming the firebox and the surrounding hearth area. It’s done with rotary brushes sized to your liner, not the wire-and-hand method that leaves cracks behind. Because of the humidity, we check the creosote’s consistency while we work – glazed deposits signal a hotter, more stubborn buildup that needs chemical treatment rather than brushing alone. The full Texas City breakdown is on the Chimney Sweep in Texas City page.
Chimney Inspection in Texas City
An inspection in Texas City starts with a camera run down the flue, and the video is yours to watch with us. We’re looking for water entry at the crown, shifting brick at the shoulder, and the salt-corrosion on metal parts that other markets rarely deal with. This is the service that tells you whether a sweep is enough or whether liner work is actually justified – and you’ll see the footage yourself before we quote anything. Details on levels and what’s included: Chimney Inspection in Texas City.
Chimney Repair in Texas City
Texas City repair work is heavy on crowns, caps, flashing, and relining – parts that fight salt air and humidity every day they’re installed. We don’t repair what should be replaced, and we don’t recommend replacement in writing unless the camera shows a condition that justifies it. Every repair carries a written one-year guarantee through our 365-Day Done Right Promise. The Chimney Repair in Texas City page covers the full scope and the guarantee terms.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Texas City
On the truck and on order forTexas City jobs, we work with DuraFlex liners, Famco caps and dampers, and Copperfield flashing and connectors. All are stocked locally enough that most parts arrive within a few days, not weeks. The full breakdown of what we install and why is on our brands page.
Pricing for Chimney Company in Texas City, TX
| Service | Typical range in Texas City |
|---|---|
| Standard chimney sweep | $180 – $320 |
| Level 1 inspection | $150 – $250 |
| Level 2 inspection (real estate or suspected damage) | $275 – $450 |
| Chimney cap replacement | $350 – $750 |
| Flashing repair or replacement | $400 – $900 |
| Damper replacement | $300 – $650 |
| Chase cover replacement | $450 – $950 |
| Crown repair or rebuild | $400 – $850 |
| Flue relining | $3,500 – $7,500 |
What pushes a Texas City quote toward the top of those ranges is water damage that’s been sitting for a season or two, advanced salt corrosion on metal parts, or a flue that needs relining rather than a basic sweep. What doesn’t move the number is our mood that day. The written price is delivered before any tool comes off the truck, and the number on the invoice is the number you approved.
Neighborhoods We Serve in Texas City
We work throughout Texas City, from the older grid streets near Bay Street and 6th Avenue to the newer subdivisions west of I-45. Our standard scheduling window in the area is two to five business days, depending on the season and the job type.
- Bay Street historic area
- West of I-45 near the levee
- Amburn Road corridor
- North Texas City near 9th Avenue
- Subdivisions near Carver Park
Service Area – Cities Near Texas City
Beyond Texas City itself, our crews run regularly to La Marque, TX, Hitchcock, TX, Dickinson, TX, and Bacliff, TX. If you’re in one of those communities and want the same written guarantee and camera-backed inspection process, the call is the same.
Serving Texas City, TX - Our Local Coverage Area
We’re based in the Texas City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Texas City
Two to five business days is typical for standard sweeps and inspections in Texas City. Repairs depend on parts, and most jobs are done within a week of the inspection that confirms the scope. Call (830) 251-4560 for the current schedule.
For sweeps and inspections, no permit is needed anywhere we work, including Texas City. For structural repairs like a full rebuild, local building codes may require a permit. We’ll tell you in writing if your job falls into that category before you’re asked to commit.
We cover all of Texas City, from the bay side to the areas west of I-45, and the neighboring cities listed above. Dispatch and scheduling are coordinated from our Houston office, and crews serve Texas City locally. There’s no zip code in the coverage area we turn away.
Call (830) 251-4560 for a written estimate. A live person answers, the price gets put on paper before work starts, and every repair carries a one-year written guarantee.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Texas City Customers Say
"Very respectful, wore boot covers, laid drop cloths. Left no soot."
- Jan S."Level 2 inspection before we bought the house. Report was detailed and saved us from a bad surprise."
- Archie M."Full inspection with a camera. Found a cracked flue tile and quoted the repair clearly. Did not push."
- Lydia C.