Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Company in Kent, WA
A chimney sweep in Kent typically runs $189 – $339, and most inspections fall between $129 and $459 depending on how deep we’re asked to go. Kent’s mix of 1970s split-levels, 1990s platform builds, and older East Hill homes means no two flues behave the same, so we quote every job after we see it in person. Call (830) 251-4560 for a written price before any work begins.
Why Kent Homes Are Different
Kent sits in the Green River Valley, and the moisture that rolls through from October into May does more to a chimney than fire ever does. Homes on the East Hill and up toward Panther Lake deal with wind-driven rain that works into cracked crowns and loose brick. Down in the valley near downtown Kent and along West Meeker Street, older houses from the 1950s and 1960s often have unlined or terra cotta liners that don’t hold up well against Puget Sound dampness. We regularly pull creosote out of Kent flues that’s damp and sticky from low-temperature wood fires, not the flaky stuff you’d see in a dry desert climate. That changes how we brush, how often we recommend sweeping, and what we flag in an inspection.
Our Main Kent Services
Most Kent homeowners call us for one of two reasons: they haven’t had their chimney looked at in years, or they used their fireplace all winter and noticed a smell, a draft issue, or staining. Here’s how each service works in Kent.
Chimney Sweep in Kent
A chimney sweep in Kent means removing creosote from the flue walls, clearing the smoke chamber, and making sure the damper opens and closes the way it should. We brush from the top down when the roof pitch allows safe access, and we cover the firebox opening before we start so no soot settles into your living room. Homes here that burn pine or fir regularly tend to build creosote faster than people expect, especially on the valley floor where firewood never fully dries. Chimney Sweep in Kent covers our full process and the written guarantee that comes with every visit.
Chimney Inspection in Kent
An inspection in Kent often starts with what the homeowner already suspects: water staining on the ceiling near the flue, efflorescence on the brick outside, or a damper that’s rusted shut. We inspect with a camera so you see what we see, and we give you a written report with photos before we make any repair recommendation. Kent’s damp winters mean hidden spalling and liner cracks are more common here than in drier parts of Washington. Chimney Inspection in Kent explains the three levels of inspection and what each one is for.
Chimney Repair in Kent
Repairs in Kent usually come down to water and time. A cracked crown lets rain in, the rain soaks the brick, the brick spalls, and the liner starts taking damage. We repair with materials like Gelco CrownCoat and HeatShield liner systems, and every repair carries a one-year written guarantee. If a covered repair fails during that year, we come back at no charge. Chimney Repair in Kent breaks down the most common jobs and what they cost.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Kent
We work with HeatShield resurfacing systems, Gelco crown and flashing products, Olympia Chimney components, and Famco caps and dampers. We keep common replacement parts close at hand for Kent jobs so a cracked cap or worn damper doesn’t stretch into two trips. Our brands are specified by the job, not by margin.
Pricing for Chimney Company in Kent, WA
| Service | Typical range in Kent |
|---|---|
| Standard chimney sweep | $189 – $339 |
| Level 1 inspection (visual) | $129 – $259 |
| Level 2 inspection (camera) | $299 – $459 |
| Chimney cap installation | $189 – $389 |
| Damper replacement | $249 – $449 |
| Flue relining (stainless or HeatShield) | $2,500 – $7,000 |
| Crown repair | $350 – $1,200 |
| Masonry repair (spalling brick replacement) | $500 – $2,000 |
Prices in Kent run toward the upper end of those ranges when the home is older and the mortar has absorbed decades of valley moisture, or when roof pitch makes safe access slower. Every job gets a written price before we start, and that’s the number you pay. No add-ons at the door.
Neighborhoods We Serve in Kent
We work across the full Kent area, from the ridgeline homes on the East Hill to the neighborhoods around Lake Fenwick and the industrial edge near the valley floor. Our scheduling team keeps response times within two to three business days for most Kent addresses.
- East Hill
- Panther Lake
- Lake Meridian area
- Downtown Kent / West Meeker
- Lake Fenwick
Service Area – Cities Near Kent
We handle chimney work in Kent and the surrounding south King County communities. If you’re in Renton, WA, over near Auburn, GA, down in Federal Way, WA, or out toward Maple Valley, WA, the same written-price process and one-year repair guarantee apply. Dispatch and scheduling are coordinated from our Seattle office; the crews serving Kent live and work in this area.
Serving Kent, WA - Our Local Coverage Area
We’re based in the Kent area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Kent
Most Kent addresses get scheduled within two to three business days. Phone coverage is a live person around the clock, so you can book a window that works for your schedule. Call (830) 251-4560 and we’ll confirm the date and time in writing.
Routine sweeps and inspections don’t require permits. Larger structural repairs, depending on what’s being rebuilt, may require City of Kent permitting. We’ll tell you plainly if your job needs one, and you’ll always know before any work starts.
Yes. We serve the full Kent area, including East Hill, Panther Lake, and the valley floor near downtown. If you’re on the edge of our South King County coverage area, call (830) 251-4560 and we’ll confirm on the spot whether your address is in range.
For a written quote and a straight answer about your chimney, call Flint Chimney Sweep at (830) 251-4560. Hank Delano and our Kent crews follow the same Garrison Standard on every job: fixed price up front, work done right, guarantee in writing.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Kent Customers Say
"Smoky fireplace for years. Turned out the cap was clogged. Swapped it and the smoke is gone."
- Brandon T."Rebuilt the crown on our chimney where water had been getting in. Neat masonry and a fair price."
- Eddie J."Very respectful, wore boot covers, laid drop cloths. Left no soot."
- Jan S.