Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Inspection Across Everett
A chimney inspection in Everett, WA typically costs $149 to $349 for a Level 1 or Level 2 inspection, with camera scans and written reports included so you can see exactly what the technician sees. We serve every Everett neighborhood, from the historic homes in Riverside and Lowell to the newer builds off Highway 99 and around Silver Lake. If you’re wondering whether your chimney is safe to burn or just needs to pass a real estate transaction, call (830) 251-4560 and we’ll walk through what the inspection involves before you book anything.
Why Flint Chimney Sweep Is Everett’s Preferred Chimney Inspection Company
Everett gets a lot of rain, and that moisture works into chimney masonry in ways homeowners don’t notice until a crown cracks or bricks start spalling. Our technicians have inspected hundreds of Everett chimneys and know the telltale signs of marine-climate damage: rusted dampers, deteriorating mortar joints, and creosote that bakes on differently than it does in drier parts of Washington. We’re part of the Garrison Partners family, founded in 2002, which means every inspection runs under The Garrison Standard: written price before work, background-checked and uniformed technicians, and a full-year written guarantee on any repair we recommend.
Everett homeowners call us because we put the findings in writing. You get a photo report from the camera scan, not a verbal summary. You get a flat price on any recommended work before you approve it. And if a covered repair fails within 365 days, we return at no charge, no argument. Hank Delano and the team coordinate dispatch from the Seattle office, but our crews live and work in Snohomish County, so we’re familiar with the housing stock, the local codes, and the specific chimney problems that show up in this area.
Chimney Fire in Everett
A Chimney Fire in Everett is what happens when creosote inside the flue ignites, and the damp climate here is a big reason creosote builds up faster than homeowners expect. Burning wet or unseasoned wood, which is common in this region, produces more smoke and more creosote. When that creosote glazes over and turns into a hard, tarry layer called third-degree creosote, it becomes fuel for a chimney fire that can crack the flue liner and spread into the surrounding structure. An inspection shows you whether that fuel is present and how far along it is.
What We Look For
During a chimney fire inspection, we check for evidence of a past fire that you may not know about: puffy or blistered creosote, warped metal components, cracked flue tiles, and discoloration on the exterior masonry. Even a small chimney fire can compromise the liner, and Everett’s wet winters accelerate that damage once water gets through a crack.
What This Inspection Costs in Everett
Expect to pay $149 to $249 for a Level 1 inspection focused on visible creosote and fire damage. If the technician suspects fire damage inside the flue, we recommend a Level 2 camera inspection at $249 to $349. The written quote covers both scenarios before we start.
Level 2 Chimney Inspection in Everett
A Level 2 Chimney Inspection in Everett is the standard we recommend for real estate transactions, after a chimney fire, after any seismic event, or when a home changes hands or appliance type. It includes everything in a Level 1 plus a full video scan of the flue interior, accessible attics, basements, and the roof around the chimney. Everett’s older housing stock, especially in the pre-1960s neighborhoods, frequently has clay tile liners that have shifted or cracked over decades of Puget Sound moisture.
Camera Inspection and Photo Report
We run a high-resolution camera up the flue and document everything: creosote thickness, liner cracks, missing mortar between tiles, and any blockages such as bird or squirrel nesting. The photo report is emailed to you after the inspection so you can see exactly what we saw. No one should recommend a liner replacement without showing you the camera evidence, and we never do.
When Everett Homeowners Need a Level 2
Buying or selling a home in Everett, especially in neighborhoods like Boulevard Bluffs or View Ridge where chimneys get a lot of wind exposure, is the most common trigger. Snohomish County also records enough minor seismic activity that we see hairline liner cracks in older masonry chimneys. A Level 2 scan typically runs $249 to $349 and is worth the cost when there’s any uncertainty about the flue’s condition.
Trusted Brands We Service in Everett
We work with professional-grade chimney products including HeatShield, Gelco, and Olympia Chimney. When your inspection identifies a liner issue or crown damage, those are the brands we specify, not whatever is on clearance at the supply house. Because we run inspections and repairs out of a dedicated Snohomish County crew, we keep common parts stocked locally for faster turnaround on Everett jobs. If your inspection finds a crack that can be sealed with Gelco or a crown that needs an Olympia Chimney sealant, we can usually quote repair on the spot and schedule it within days, not weeks.
Common Chimney Inspection Problems We See in Everett Homes
- Cracked chimney crowns from constant moisture exposure. Everett’s wet climate means the concrete cap on top of your chimney absorbs water, freezes in cold snaps, and cracks. Once cracked, water gets behind the masonry and spalling accelerates.
- Second- and third-degree creosote buildup from burning wet wood. Even homeowners who only burn a few times a year end up with dangerous glaze because local firewood is often not fully seasoned. A brush-only sweep cannot remove hardened third-degree creosote.
- Flue liner cracks in older clay tile chimneys. Homes built before the 1970s in Riverside, Lowell, and downtown Everett frequently have clay liners with cracked or missing sections. The camera scan is the only way to confirm it.
- Blocked flues from animal nesting near the cap. Our rain-heavy seasons drive squirrels, raccoons, and birds into chimneys looking for shelter. Even if you never burn, a blocked flue can push carbon monoxide back into the house if the furnace or water heater vents through the same flue.
Pricing for Chimney Inspection in Everett, WA
A Level 1 chimney inspection in Everett runs $149 to $249. A Level 2 inspection with camera scan and photo report runs $249 to $349. Level 3 inspections, which involve removing parts of the chimney structure, are quoted after the Level 2 identifies the scope. What affects cost: the height and accessibility of your roof, whether your chimney runs through the top of the house or out a side wall, and the severity of any findings. We give you a written price before any work begins, and the inspection fee is separate from any repair quote. Call (830) 251-4560 for a straight answer on what your specific chimney will cost to inspect.
We Also Serve Cities Near Everett
Our crews cover Everett and the surrounding communities, including Marysville, Lake Stevens, Mukilteo, and Snohomish. If you’re in one of those areas and need a Chimney Inspection done right, the same written-price guarantee and camera photo report apply. Call (830) 251-4560 and we’ll schedule a time that works for you.
Serving Everett, WA - Our Local Coverage Area
We’re based in the Everett area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Inspection in Everett
Yes, and for a reason that surprises most homeowners: Everett’s wet marine air damages chimneys even when a fireplace never gets used. Moisture gets into cracked crowns, Rusted dampers, and the top of the flue, and animals move in during wet months, creating blockages. An annual Level 1 inspection costs $149 to $249 and catches these problems before they become expensive repairs. Give us a call at (830) 251-4560 if your chimney has been sitting unused for more than a season.
A Level 1 inspects the accessible portions of the chimney, flue, and firebox, and is enough when nothing has changed since the last inspection. A Level 2 adds a full video scan of the flue interior and is required when you buy or sell a home, after a chimney fire, after a seismic event, or when you change fuel type. In Everett, where older masonry chimneys commonly hide liner cracks behind the smoke chamber, we recommend Level 2 for most first-time inspections. Call (830) 251-4560 and we can tell you which level your situation calls for.
Yes. A Level 1 inspection is $149 to $249, and a Level 2 with camera scan is $249 to $349. You get that price in writing before any visit is booked, and the number never changes at the door. If you end up needing a repair, we quote the repair separately, with a written price and the materials specified by name, before any work is approved.
A chimney needs sweeping when the creosote buildup reaches about 1/8 inch thick, or when you see second-degree creosote flakes or third-degree glaze. Most Everett homes that burn regularly need a sweep every 25 to 50 burns, which for many households means once or twice per year. A standard sweep in Everett typically runs $189 to $289. The only reliable way to know if you’re due is a quick inspection, which is exactly what our Level 1 covers. Call (830) 251-4560 if you’ve lost track of when your last sweep happened.
It should be addressed before the next heavy rain season, and in Everett that’s most of the year. A cracked crown lets water into the masonry, and spalling (bricks flaking or popping off) means water has already gotten behind the surface and is pushing pieces apart. The longer it goes, the more bricks you lose and the more expensive the repair. On Rucker Hill, we inspected a crown crack that looked minor from the ground and found second-degree creosote flaking on the flue liner above a stuck damper, all driven by moisture and a nesting animal near the cap. The homeowner hadn’t lit a fire in two years. Our recommendation depends on the camera evidence, not the water damage alone. Call (830) 251-4560, and we’ll tell you plainly if it can wait or not.
Call Flint Chimney Sweep for Your Everett Chimney Inspection
If you want a chimney inspection in Everett where the price is written down before we come out, the findings are documented with a camera and photo report, and the recommendation is direct: call us at (830) 251-4560. We’ll give you the exact cost of a Level 1 or Level 2 inspection for your home, walk you through what to expect, and schedule at a time that fits your schedule. No upsell, no vague summary, no “trust me” without evidence. Just a straight answer on the condition of your chimney and a written price for any work you decide to approve.
Written by Hank Delano, Owner at Flint Chimney Sweep. Part of the Garrison Partners family since 2002, serving Everett and Snohomish County with written-price chimney inspections, Level 2 camera scans, and the 365-Day Done Right Promise on every repair.