Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Cheney
Chimney repair in Cheney, WA typically runs $220 – $1,400 depending on what’s failed, and most flashing or crown repairs are done in a single visit. We’re Flint Chimney Sweep, part of the Garrison Partners family since 2002, and we put a written price in your hand before a single tool comes off the truck. You’ll get a camera inspection and photo report on every repair call, plus a 365-Day Done Right Promise in writing. Call (830) 251-4560 to book.
Why Flint Chimney Sweep Is Cheney’s Preferred Chimney Repair Company
Cheney homeowners call us because the process is predictable. A live person answers the phone 24/7, you get a window time for arrival, and the technician shows up in uniform with a background check on file. There’s no voicemail tree and no callback form. When you book a Chimney Repair with us, the price is written down and approved by you before work starts. That’s The Garrison Code, and every Garrison Partners location runs on it.
The warranty isn’t verbal. Every repair we make in Cheney carries a written guarantee valid for one full year. If a covered repair fails in that window, we come back at no charge, no argument. That’s the 365-Day Done Right Promise. Homeowners who’ve been burned by no-show crews or price-at-the-door games tell us the written commitment is the reason they stay. We also know the local housing stock: split-levels near the university, 1970s ranches off Cheney-Spokane Road, newer builds out toward the Salnave area. Each has its own failure patterns.
Hank Delano runs our repair team, and he holds every tech to The Garrison Standard: document the problem with camera evidence, show the homeowner what you found, and never recommend a liner job or rebuild that the photos don’t support.
Chimney Flashing Repair in Cheney
Chimney flashing repair in Cheney is the fix we do most often, because wind-driven rain from the southwest pushes water under lifted flashing and into the smoke chamber before you’ll ever see a ceiling stain. Flashing is the metal that seals the joint where your chimney meets the roofline. In Cheney’s high-wind corridor, step flashing and counter flashing take a beating, and when the sealant dries out or the metal pulls loose, water gets in. Expect to pay $350 – $750 for a typical flashing repair here, depending on roof pitch and how much metal needs replacing.
What the repair actually involves
We don’t caulk over failed flashing and call it fixed. The old flashing comes out, the roof decking under it gets checked for rot, and new step and counter flashing goes in with the proper overhang. We use Copperfield flashing products most often, because they hold up to Cheney’s wind and rain better than thin box-store metal.
Signs you need it now
Water staining on the ceiling near the fireplace, peeling paint on the chimney chase, or a musty smell in the firebox after a rainstorm. If your damper is rusting, water is already getting past the flashing.
Chimney Crown Repair in Cheney
Chimney crown repair in Cheney fixes the concrete top slab that keeps rain and snowmelt out of the flue liner and chimney structure. Wind-driven rain and freeze-thaw cycles crack flat or poorly sloped crowns in this part of Eastern Washington, and once water gets under the crown, it runs down the outside of the liner and starts spalling the brick from the inside. A crown rebuild in Cheney typically runs $600 – $1,200, with a sloped overhang and proper weep channels.
Why flat crowns fail here
Freeze-thaw is the big one. Water sits in a hairline crack, freezes, expands, and the crack grows. After a few winters, the crown looks like a spiderweb and water is getting into the chase. We rebuild the crown with a proper 2-inch overhang and slope it away from the flue so water sheds instead of pooling.
When we can do a resurfacing instead
If the crown is cracked but not crumbling, we can sometimes apply a CrownCoat resurfacing product at $300 – $500 instead of a full rebuild. We’ll show you the camera footage before recommending one over the other. If the crown is beyond resurfacing, we’ll say so plainly and write up the rebuild price.
Trusted Brands We Service in Cheney
We work with professional-grade chimney products from Famco, DuraFlex, HeatShield, Olympia Chimney, Gelco, and Copperfield, but we don’t pick a brand out of habit. The job dictates the material. A Cheney homeowner getting a flashing repair will usually see Copperfield metal go in, because it stands up to our wind-driven rain. A flue relining job gets DuraFlex or HeatShield, depending on the liner condition and the appliance. We stock common sizes and parts for Cheney-area jobs, so most repairs don’t wait on a parts shipment. If a product we install has a manufacturer defect, the written warranty on our work still applies, and the product warranty comes from the maker, not from us.
Common Chimney Repair Problems We See in Cheney Homes
- Lifted or rusted chimney caps. Southwest wind gets under a loose cap and drives rain straight down the flue. In the Willow Springs neighborhood near Cheney-Spokane Road, our tech pulled a badly rusted Copperfield cap off a 1970s ranch and found the crown spidered with hairline cracks and flashing pulled loose from the shingles.
- Crown cracks from freeze-thaw. Water sits in a crack, freezes, expands, and the crack spreads. By spring, water is running down the exterior of the flue liner and the brick face starts spalling.
- Damper rust from chimney leaks. A leaking chimney soaks the smoke chamber before you ever see water on the ceiling. The first thing that fails is usually the damper, and by the time you notice it’s stiff, the damage is already done.
- Glazed creosote from Eastern Washington’s dry heat. A summer of hot, dry conditions bakes first-degree creosote into second- and third-degree glaze over a single burning season. A chimney that only needed a brush last year can need chemical treatment this year.
Pricing for Chimney Repair in Cheney, WA
Here’s what Cheney homeowners can expect to pay. Flashing repair runs $350 – $750. Crown rebuild runs $600 – $1,200; resurfacing runs $300 – $500. Mortar repointing runs $25 – $45 per square foot. Tuckpointing runs $20 – $40 per square foot. Chimney waterproofing runs $300 – $600. Full chimney rebuilding runs $4,000 – $12,000 depending on height and access. Spalling brick repair runs $400 – $900. The written price we give before work starts is the price on the invoice, period. Call (830) 251-4560 for a free estimate, and we’ll put a number in writing before you commit to anything.
We Also Serve Cities Near Cheney
Flint Chimney Sweep serves Cheney and the surrounding communities, including Medical Lake, Airway Heights, Spokane, and Mead. Scheduling for Cheney jobs is coordinated from our Seattle office; our crews serve Cheney locally and arrive in uniform with a written price in hand.
Serving Cheney, WA - Our Local Coverage Area
We’re based in the Cheney area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Cheney
Once a year, before burning season. In Cheney’s climate, wind-driven rain and freeze-thaw cycles can cause flashing and crown damage that develops quickly, and Eastern Washington’s dry summer heat bakes creosote into glaze faster than you’d expect. An annual inspection catches these before they become structural.
A Level 1 inspection checks the readily accessible parts of the chimney when nothing has changed since the last inspection. A Level 2 goes further with camera equipment, checking the flue liner, smoke chamber, and crown when you’ve changed appliances, had a chimney fire, or the home is changing hands. For most Cheney homes, we recommend a Level 2 on the first visit, then Level 1 annually after that.
Yes, in most cases. Flashing repair and crown rebuild are separate jobs from a full chimney rebuild. We’ll show you camera footage of the liner and brick condition before recommending any work. If the liner is sound and the brick is stable, we fix the flashing and crown and leave the rest alone. Call (830) 251-4560 for a straight answer on your specific chimney.
Yes. Some repairs can wait, and we’ll say so plainly. The camera footage tells the story. If the flashing is leaking but the liner is still sound and the burn season is over, we may tell you to wait. If the crown is cracked and water is running down the liner, that costs more the longer it sits.
Yes. We work with HeatShield, DuraFlex, and Olympia Chimney liners, and we install and repair all three with the same written warranty on labor. The liner gets inspected with a camera before we touch it, and if it needs relining, you’ll see the footage and approve the price before any work starts.
Flint Chimney Sweep serves Cheney homeowners with chimney repair built on a written price, a camera inspection, and a one-year guarantee. Call (830) 251-4560 for a free estimate, and ask for Hank Delano if you want to talk through what the camera showed.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Cheney since 2002.