Chimney Repair in Cleburne - Inspected on Camera, Then Priced in Writing

Fast, Reliable Chimney Repair Across Cleburne

Chimney repair in Cleburne, TX typically costs between $275 and $1,900 depending on the damage, with flashing repair and mortar repointing on the lower end and full chimney rebuilding or liner installation on the higher end. Most Cleburne homes we inspect don’t need as much work as the homeowner fears, but the work they do need is usually weather-driven, not fire-driven. We give you a written price before any tool comes off the truck, and every repair carries a written guarantee for a full year. Call (830) 251-4560 and we’ll schedule an inspection, no obligation.

Call (830) 251-4560

Cleburne sits on Johnson County’s blackland prairie and catches the same hard, wind-driven rain and hail lines that roll through the Metroplex every spring. That means chimney crowns, caps, and flashing take a beating here even on homes that never burn a fire. Hail cracks crowns. Wind lifts flashing. Water gets in and works its way down through the masonry. The result is spalling brick, rusted fireboxes, and dampers that won’t open, long before any creosote problem shows up. We know Cleburne’s storm cycle, we know where the damage shows up first, and we know how to fix it so it holds.

Why Flint Chimney Sweep Is Cleburne’s Preferred Chimney Repair Company

We’ve repaired chimneys in Cleburne long enough to know that most local homeowners don’t want a lecture on masonry science. They want a straight answer, a fair price, and a crew that shows up when they say they will. That’s how we run every job. Part of the Garrison Partners family founded in 2002, we operate under the Garrison Standard: a written price before work starts, a written guarantee when the work is done, and a live person on the phone around the clock. No voicemail trees. No waiting until Monday. If you call at midnight with a chimney concern, a person answers.

Hank Delano leads our repair team. Hank trains every technician to work the way he does: look first, explain clearly, write the price down, then do the work. Our techs arrive in uniform, background-checked, and they don’t improvise on price at the door. Homeowners around Cleburne from Westhill to East Cleburne to the neighborhoods off Nolan River Road have seen the same thing happen: a tech walks the roofline, runs a camera up the flue, and hands over a photo report that shows exactly what’s going on. You see what we see. If a repair we make fails within a year, we return and fix it at no charge. That’s the 365-Day Done Right Promise, in writing, on every job.

Chimney Liner Installation in Cleburne

Chimney liner installation in Cleburne means replacing the inner liner that channels smoke and gases safely out of the house, and in this market it typically runs $1,400 to $3,200 or more depending on flue size, liner material, and the condition of the surrounding masonry. A liner isn’t something you replace on a schedule. You replace it when the old clay liner is cracked, spalled, or missing sections and the flue can no longer do its job. After a few hard Cleburne storm seasons, cracked clay liners are common, especially on chimneys built before the 1980s.

What We Install and Why It Works

We install stainless steel liners from DuraFlex and copper liners from Copperfield, sized to the flue, not whatever is on the shelf. A properly installed stainless liner vents flue gases efficiently, protects the masonry from acidic condensate, and brings an older chimney up to current clearance standards. We don’t recommend relining on a hunch. The decision follows a Level 2 camera inspection. If the camera shows cracked tiles, gaps at the joints, or spalling down the flue, we show you the images and explain the options.

Some Cleburne chimneys only need a partial repair of the existing clay liner, not a full replacement. We’ll tell you when that’s the case. A partial repair typically runs $850 to $1,400. We won’t push a full liner replacement when a targeted HeatShield application or a section repair is the honest call.

Chimney Flashing Repair in Cleburne

Chimney flashing repair in Cleburne usually runs $300 to $800, and it is the single most common chimney repair call we get in this city. Flashing is the metal seal where the chimney meets the roofline. Texas wind, hail, and wild temperature swings between summer and winter work that metal loose over time. When flashing fails, water runs down the outside of the chimney, into the masonry, and sometimes all the way into the attic or firebox. It looks like a “chimney leak,” but the actual problem is at the roofline joint, not inside the flue.

What a Proper Flashing Fix Looks Like in Cleburne

A proper flashing repair requires removing the shingles around the stack, pulling the old flashing, and installing step flashing and counterflashing that sheds water the way it should. Poor flashing repairs are common here. Some contractors caulk over the old metal and call it done. That fails after one storm season. We re-flash the stack properly and replace any damaged shingles around the repair.

We were called to a home off the Woodard Avenue area of Cleburne after the owners noticed rust streaks running down the firebox and a smoky smell on still days. That’s a classic sign of water getting past a hail-cracked crown and a failing flashing seal, not a draft problem. Our tech ran a Level 2 inspection, put a camera up the flue, and found spalling in the smoke chamber brick with a failed flashing seal at the roofline. We rebuilt the crown, re-flashed the stack, and handed the homeowner a photo report of before-and-after so they could see exactly what the storm had done.

Trusted Brands We Service in Cleburne

We work with professional-grade chimney products because cheap materials fail faster and cost more over time. For liner installation and repair, we use DuraFlex stainless liners and Copperfield copper liners. For crown sealing, we use Gelco or HeatShield depending on the application. For dampers, caps, and related hardware, we source Famco. We keep common parts stocked and available for Cleburne jobs, which means less waiting and fewer return trips for you. You can verify any of these brands independently, which is the point. You shouldn’t have to take our word for a material quality claim. You should be able to look it up.

Common Chimney Repair Problems We See in Cleburne Homes

• Hail-cracked crowns and caps. Spring storms smash down on Cleburne’s roofs, and the chimney crown takes the direct hit. Cracks let water into the flue, rusting the firebox and damper before any creosote problem ever appears.
• Failed flashing at the roofline. This is the number one source of slow leaks and spalling brick in Cleburne. It reads as a “chimney leak” when it’s really a roof-joint problem.
• Glazed, third-degree creosote hidden behind a brush sweep. Homeowners who burn here and there often miss annual inspections. A cheap brush-only sweep won’t remove tar-glazed creosote that sits behind what looks like a clean surface, and that’s a chimney fire waiting to happen.
• Spalling brick and failing mortar from decades of prairie weather. Cleburne’s freeze-thaw cycle, even though it’s mild compared to the north, works moisture into masonry joints. Once mortar fails and bricks flake, the damage accelerates fast.

Pricing for Chimney Repair in Cleburne, TX

We Also Serve Cities Near Cleburne

Our Chimney Repair team works all over Johnson County and the surrounding area. If you’re in Keene, Joshua, Alvarado, or Burleson, we schedule service the same way we do in Cleburne: written price up front, camera inspection, and a one-year guarantee in writing. Read more about our work on the Chimney Repair in Cleburne page or call us to schedule.

FAQs About Chimney Repair in Cleburne