Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Burleson
Chimney repair in Burleson typically runs $180 to $1,900 depending on what failed, and most flashing repointing or crown sealing jobs are done in a single visit. We’re Flint Chimney Sweep, part of the Garrison Partners family founded in 2002, and our crews serve Burleson homes from a Dallas-Fort Worth dispatch office. If you’ve got water staining near the chimney, loose flashing, or a hail-dented cap, call (830) 251-4560 for a written quote before any work starts.
Why Flint Chimney Sweep Is Burleson’s Preferred Chimney Repair Company
We work under The Garrison Standard: every repair gets a written price before a tool comes off the truck, and every job carries the 365-Day Done Right Promise. That means if a covered repair fails within one full year, we return at no charge. No argument, no second invoice. Burleson homeowners who’ve been burned by no-show crews or price changes at the door tend to stay with us once they see the paperwork.
Our technicians are background-checked and uniformed, so you know who’s walking through the door. Phones are answered by a live person 24 hours a day, seven days a week, not a voicemail tree. When you call about a leaking chase or a cracked crown on a home off Wilshire Blvd, someone picks up and schedules the visit. Hank Delano leads the team, and he holds every job in Burleson to the same standard as a full rebuild off I-35W.
We don’t ask you to trust our word alone. We work with professional-grade chimney materials including HeatShield, Gelco, and Olympia Chimney, specified by job rather than margin. If you want to verify what goes into your repair, you can look up every brand we install.
Chimney Flashing Repair in Burleson
Chimney Flashing Repair in Burleson is the single most frequent repair we book, because hail and wind here lift flashing edges on rooflines across the city and let water run behind the brick. Flashing is the metal transition where the chimney meets the roof deck. When it bends, lifts, or rusts through, water follows the brick face and chimney chase downward, rusting the firebox damper and staining the ceiling below the roofline.
What A Flashing Repair Involves
We remove the old step and counter-flashing, inspect the wood sheathing beneath for rot, then set new flashing in a layered shingle pattern so water always drains away from the chimney, never behind it. On Burleson homes with steep second-story pitches, the job takes a full day. Flashing repair in Burleson typically runs $350 to $850 depending on chimney height and how much old metal needs removing.
What You Can Check Before Calling
From the ground, look for curled metal edges where the chimney meets the shingles, dark staining on the brick just below the roofline, or rust-colored streaks running down from the flashing. These are the signs our technicians see most often on homes near Hidden Creek and along Alsbury Blvd. If you spot them, call us. The repair is far less expensive than the water damage that follows.
Chimney Crown Repair in Burleson
Chimney Crown Repair in Burleson addresses the concrete or mortar cap at the top of the chimney, the part that sheds rain and hail away from the flue liner and the brick below. Burleson sits in a hail corridor, and the crown takes a beating. Hairline cracks form after storms, then freeze-thaw cycles during Texas winter swings open those cracks into channels. Water wicks into the smoke chamber and the mortar joints, spalling brick at the crown edge and leaving rust staining under the flashing at the next inspection.
When A Crown Crack Is An Immediate Concern
A crack wider than a quarter-inch, or one that sits where the crown meets the flue tile, needs attention now. A small hairline crack that hasn’t reached the flue is a candidate for a Gelco or Olympia Chimney crown sealer, applied after cleaning. Waterproofing and sealing the crown is part of the repair, and it stops the slow damage that leads to expensive rebuilding later. Crown repair in Burleson runs $300 to $1,200 depending on whether we’re sealing, patching, or rebuilding the crown entirely.
Trusted Brands We Service in Burleson
We stock and install parts from HeatShield, Gelco, and Olympia Chimney, so when a Burleson homeowner needs a repair done, we’re not waiting on a distributor. HeatShield resurfacing rebuilds damaged flue liners from the inside without pulling the chimney apart. Gelco and Olympia Chimney make crown sealers and cap systems that hold up to the hail and freeze-thaw conditions we see across Johnson County. The point is simple: your repair uses a part we can name, from a manufacturer you can look up.
Common Chimney Repair Problems We See in Burleson Homes
- Hail-dented caps and lifted flashing: Burleson’s position in the hail corridor means storm damage is our most common repair call, not fire damage. The cap gets dented, the flashing edges lift, and water gets in.
- Clay-soil crown cracks: Expansive clay under Burleson shifts during drought-to-wet swings, which cracks the chimney crown. That opens a direct path for water into the smoke chamber and mortar joints.
- Stop-and-go creosote buildup: Texas winters run the fireplace hard for a few days, then it sits idle. The thin, hard-to-target first-degree creosote that forms climbs into second-degree over time, which can pit the flue liner.
- Spalling brick at the crown edge: The freeze-thaw cycles that follow hailstorms turn trapped water into expansion, flaking the brick face and open the chimney to faster deterioration. Left alone, spalling leads to a partial rebuild rather than a repointing.
Pricing for Chimney Repair in Burleson, TX
Flashing repair in Burleson runs $350 to $850. Crown repair runs $300 to $1,200. A standard chimney sweep with camera inspection and photo report runs $180 to $250. Mortar repointing or tuckpointing is generally $400 to $1,000, depending on how many joints need tooling. Spalling brick repair and chimney rebuilding run higher, from $700 to $1,900 or more for a full top section rebuild.
What moves the price is access, chimney height, and how much old material has to come out before new work goes in. A steep two-story chimney off Oakmont or Deer Creek will cost more than a single-story fireplace on a slab. Every quote is written before work begins, so the number you approve is the number on the invoice. Call (830) 251-4560 for a free estimate.
We Also Serve Cities Near Burleson
Our technicians cover Burleson and the surrounding Johnson County communities, including Crowley, Joshua, Alvarado, and Kennedale. If you’re just outside the city line and need Chimney Repair in Burleson, call and we’ll route accordingly. For the full scope of Chimney Repair services, you can review what we do across North Texas.
Serving Burleson, TX - Our Local Coverage Area
We’re based in the Burleson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Burleson
The repeated freeze-thaw cycle after hailstorms works the metal edges back and forth until the seal fails, which is why flashing repair is the most common chimney call we get in Burleson. Hail dents the cap and lifts the flashing, then temperature swings open the gap further. If your flashing has pulled loose twice in three years, the issue is usually the underlayment or the moisture barrier below the metal, not the flashing itself. Replacing the seal correctly requires removing the old flashing and setting new step and counter-flashing with the correct overlap. For an exact quote, call (830) 251-4560.
A Burleson chimney needs a Level 2 inspection once a year if you burn regularly, and before you buy a home here, since hail and clay soil drive failures that a basic visual check misses. The reason is Burleson-specific: storm damage accumulates slowly, and the crown cracks and flashing gaps that cause expensive repairs start small enough to miss from the ground. If you burn mostly for holidays, every two years is reasonable. A Level 2 inspection includes camera inspection of the flue liner and a photo report, so you see exactly what the tech saw.
A Level 2 inspection includes a camera run through the flue liner, which catches first-degree creosote building in the upper flue, hail-dented caps, lifted flashing such as the flashing pulling loose on a Burleson rooftop, and crown cracks that are wicking water into the smoke chamber. A basic sweep only clears what’s visible from the firebox and the top of the flue, and it will miss what’s happening behind the chimney chase. We include the camera inspection and photo report as part of our Level 2 inspection, because you should not have to trust someone else’s word about your own chimney.
We schedule Burleson chimney repairs within a few days in most cases, with the note that a written quote and a scheduled appointment are better than a rush job. We don’t promise same-day service, because a proper chimney repair means pulling old material, inspecting what’s underneath, and setting new work to cure. What you get instead is a firm date and a firm price before we arrive. Call (830) 251-4560 and a live person will set it up.
First-degree creosote is a thin, dusty coating that can be swept, though stop-and-go Texas heating makes it accumulate in hard-to-target bands. At second-degree, the creosote is a flaky, tar-like deposit that can ignite, and it will pit the flue liner if it burns hot enough. Third-degree is a hard, glossy glaze bonded to the liner, and it is the point at which a chimney fire becomes a serious risk and liner damage is already underway. We recommend repair and sweeping before you reach that stage, because flue relining is far more expensive than an early sweep.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Burleson with documented repair work and a full-year written guarantee.