Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Crowley
Chimney repair in Crowley usually means one of two things: water has gotten into the masonry and started breaking it apart, or the flue system itself has a problem the naked eye can’t see. Our crews work Crowley neighborhoods every week, from the subdivisions off FM 1187 to the acreage properties along the Crowley ISD edges. We carry the right parts for both builder-grade prefab fireboxes and full masonry chimneys, and every repair starts with a written price before a single tool comes off the truck. Call (830) 251-4560 and you’ll talk to a live person, not a callback form.
Why Flint Chimney Sweep Is Crowley’s Preferred Chimney Repair Company
Crowley homeowners call us after getting burned by companies that no-show or change the price at the door. That’s why the 365-Day Done Right Promise matters here: every repair we make is covered in writing for one full year. If a covered repair fails, we return at no charge. No argument, no re-quote.
We dispatch uniformed, background-checked technicians who know the difference between a subdivision brick chase near Deer Creek and a farmstead masonry chimney off Old Cleburne Road. Those are two different repair jobs, and a crew that treats them the same is guessing. Flint Chimney Sweep has been part of the Garrison Partners family since 2002, and every location follows The Garrison Standard: put the price, scope, and guarantee in writing before work begins.
Our Chimney Repair team serves Crowley directly. Dispatch is coordinated from the brand’s Dallas-Fort Worth office, and we schedule crews into Crowley throughout the week. When you book, you get a written quote. When we arrive, the number on that paper is the number you approved.
Chimney Masonry Repair in Crowley
Chimney Masonry Repair in Crowley is the most common repair we quote, and it almost always traces back to water. A standard mortar repointing job in Crowley runs $800 – $2,400 depending on how much of the chimney face is involved. Spalling brick repair, where water has soaked into the brick and popped the face off, typically runs $1,200 – $3,600 here. Flashing repair around the roofline runs $450 – $1,100.
Mortar Repointing and Tuckpointing
Repointing means grinding out the old, crumbling mortar joints and packing in fresh mortar that matches the original color. On Crowley brick chases, we see joints failing where sprinkler spray hits the chimney every morning. Tuckpointing is the finish work that makes the repair look original, not patched. Most Crowley repointing jobs take one to two days.
Spalling Brick and Chimney Rebuilding
Brick spalls when trapped water freezes and expands. North Texas gets enough hard freezes each winter to keep that cycle going, and Crowley brick built before proper waterproofing was common shows it. If the damage has moved into the chimney structure itself, partial rebuilding runs $3,500 – $9,000 in Crowley. We quote that only after showing you photos of the damage, not before.
Chimney Cap Installation in Crowley
Chimney Cap Installation in Crowley is a small job that prevents the biggest repair bills we see. A quality stainless cap installed on a standard flue runs $325 – $650 in this market. Homes with multiple flues or oversized brick crowns run higher, usually $500 – $900.
Why a Cap Matters on Crowley Chimneys
A missing or rusted cap lets rain run straight down the flue. From there it hits the damper, puddles in the smoke chamber, and eventually rots the firebox. We regularly pull caps on Crowley chimneys that have been gone for years, and the damper below is already rusted solid. Replacing the cap before that happens is a $400 fix instead of a $2,000 one.
What We Install
We stock stainless caps from Famco and Copperfield for standard flue sizes, so most Crowley installations go in on the first visit. Custom chase covers for prefab fireboxes take a few days because we fabricate them to the chimney’s actual dimensions. No universal-fit pieces that rattle in the wind.
Trusted Brands We Service in Crowley
We work with the chimney trade’s standard professional materials because repairs hold up longer when the parts are specified for the job, not the margin. For Crowley homes with prefab fireboxes, we use DuraFlex liners when a reline is needed. For masonry crowns and flashings, we use HeatShield sealant systems and Olympia Chimney parts. We keep the common sizes in stock for Crowley jobs, which means most cap replacements and crown reseals don’t wait on a parts order. Hank Delano has been directing this operation for years, and the brand trust comes from using materials a homeowner can verify independently, not from a brochure claim.
Common Chimney Repair Problems We See in Crowley Homes
- Water past cracked crowns on subdivision brick chases. The crown is the concrete cap on top of the chimney. When it cracks, water runs down into the smoke chamber and rusts the damper long before any fire risk shows. In Crowley subdivisions built in the 1990s and 2000s, this is the most common repair we quote.
- Prefab fireboxes treated like full masonry chimneys. Newer Crowley builds often have factory-built fireboxes with metal flues, not clay tile or brick flues. Wrong repair parts get quoted, wrong expectations are set, and the price is wrong. We identify the flue system type before quoting anything.
- Third-degree creosote hiding behind a clean-looking hearth. A fire can look fine from the living room while the flue liner is glazed with hardened creosote. On a brick home near Deer Creek Drive, our tech pulled a Level 2 camera inspection and found the chimney crown cracked and flashing pulling away from the chase, letting water run down into the smoke chamber and rust the damper. We repoured the crown, reseated the flashing, and brushed first-degree creosote off the flue liner while we were up there – the homeowner got a photo report of every step before we left.
- Flashing pulling away at the roofline. Flashing is the metal strip that seals the chimney to the roof. On Crowley homes with steep shingle pitches, wind and thermal expansion work it loose over time. Once it peels, every rain gets in around the chimney chase. Flashing repair runs $450 – $1,100 in Crowley and is a one-day job.
Pricing for Chimney Repair in Crowley, TX
Every repair we quote in Crowley gets a written price before work starts. Mortar repointing runs $800 – $2,400. Spalling brick repair runs $1,200 – $3,600. Flashing repair runs $450 – $1,100. Chimney cap installation runs $325 – $900 depending on flue count and chase size. Partial chimney rebuilding runs $3,500 – $9,000. Waterproofing a chimney exterior runs $600 – $1,400. These are Crowley market numbers, not national averages. The quote you get is the number you pay. Call (830) 251-4560 for a free estimate, and we’ll put it all on paper before anything starts.
We Also Serve Cities Near Crowley
Flint Chimney Sweep serves Chimney Repair in Crowley and the surrounding communities. Our crews handle repair and cap work in Burleson, Joshua, Kennedale, and Arlington during the same week they’re in Crowley. If you’re just outside the city limits, call (830) 251-4560 and we’ll tell you which day we’re scheduled in your area.
Serving Crowley, TX - Our Local Coverage Area
We’re based in the Crowley area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Crowley
Once a year if you burn regularly during fall and winter. The National Fire Protection Association standard is annual inspection, and in North Texas the issue is creosote buildup and water intrusion more than soot volume. If you burn occasionally, every 12 to 18 months is usually enough. If you’ve never had the chimney inspected since buying the home, have it done now. Call (830) 251-4560 and we’ll schedule a sweep and inspection with a written price before we arrive.
Yes. Every job gets a written quote before any work starts. For a standard sweep and inspection in Crowley, we quote a flat price over the phone based on the flue type and what you describe. If the camera inspection uncovers repair work, you get a separate written estimate with photo evidence before anything is approved. The number on the invoice is the number you approved.
Photos taken inside your flue with a Level 2 camera probe, plus photos of the crown, flashing, cap, and firebox from outside. You see the condition of the flue liner, any creosote deposits, any water staining, and any cracked masonry. If we recommend a repair, you’ll see the reason in the photos. If nothing needs repair, the photos show that too. No work is ever recommended without camera evidence you can review yourself.
Yes. A missing or rusted cap lets rain run straight down the flue and into the smoke chamber. That rusts dampers, rots fireboxes, and corrodes metal flue liners. On Crowley homes, cap replacement runs $325 – $650 for most jobs, which is a fraction of the repair cost if water gets in first. If your cap is damaged or gone, call (830) 251-4560 and we’ll quote it before we come out.
Repointing removes only the failing mortar between bricks and packs fresh mortar into the joints. Replacing masonry means removing and setting new brick or stone because the masonry units themselves are broken or spalled. In Crowley, repointing runs $800 – $2,400 on most chimneys. Full masonry replacement or rebuilding runs $3,500 and up. We quote both jobs from photos and measurements, never from a guess over the phone.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Crowley, TX. Part of the Garrison Partners family since 2002.