Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Lewisville
Chimney repair in Lewisville, WA typically runs $350 to $2,500 depending on whether you’re dealing with a damaged cap, spalled brick, or a flue liner joint that’s come loose after a storm. Most repairs we handle in Lewisville are completed in a single visit, though some masonry work like full rebuilding may require a follow-up trip once mortar has cured. We’ve worked on everything from mid-century ranch homes near the Clark County line to the 1990s subdivision houses that fan out toward the East Fork of the Lewis River. If you’re seeing water streaks on the ceiling near the firebox or hearing a metallic rattle in the flue when the wind picks up, call us at (830) 251-4560 and we’ll get a camera in there to show you exactly what’s going on.
Why Flint Chimney Sweep Is Lewisville’s Preferred Chimney Repair Company
Lewisville homeowners across the north Clark County area call us because we put the price and the scope in writing before a single tool comes off the truck. That’s not a slogan. It’s how every job runs under the Garrison Standard, the operating code we follow as part of the Garrison Partners family founded in 2002. Our owner, Hank Delano, built the company on a simple rule: the number you approve is the number you pay, and the repair carries a 365-Day Done Right Promise in writing. If a covered repair fails within a full year, we return at no charge. No argument, no invoice.
The technicians who show up at your Lewisville home are background-checked and uniformed, so you know exactly who’s walking through the door. And when you call, a live person answers. Around the clock, every day. No voicemail trees or callback forms. That matters when you’ve got water coming in around the chimney chase at 7:00 on a Sunday evening and you need a straight answer about whether it’s safe to run the fireplace.
Chimney Cap Installation in Lewisville
Chimney Cap Installation in Lewisville is one of the most common repairs we handle on older masonry homes here, and it’s often the cheapest fix that prevents a far more expensive one. A proper cap keeps rain, hail-driven water, and debris out of the flue and smoke chamber. Around Lewisville, where North Texas hail seasons can hammer a chimney crown and knock a cap loose, a missing or badly fitted cap is the number one thing that starts spalling and interior brick degradation.
Caps Sized to Lewisville Flues
We measure the flue opening on site and install a cap that fits the specific dimensions of your chimney, not a universal one that leaves gaps. For most Lewisville homes, a standard stainless or copper cap runs $225 to $450 installed, depending on flue size and whether we’re working with a masonry crown or a factory-built chase top.
When Installation Is the Right Call
A new cap installation makes sense if your chimney never had one, or if the previous cap was secured with a friction fit that’s failed. We use mechanical fastening instead, so the cap stays put through the next hailstorm. The work is typically done in under two hours, and the guarantee is the same one we put on every repair: a full year in writing.
Chimney Cap Replacement in Lewisville
Chimney Cap Replacement in Lewisville fills the gap when the original cap is still on the roof but failing at its job. You may not notice until water shows up in the firebox or you hear that rattle on windy days. Our tech was called to a 1990s two-story in the Castle Hills area after the homeowner noticed a metallic rattle in the firebox on windy days; a Level 2 inspection with the camera showed the cap had been pushed loose by hail and the factory-built flue liner had a dislocated joint that was letting creosote flake drift down to the damper. We replaced the cap, re-seated the liner section, and handed the homeowner the photo report showing the before-and-after of the smoke chamber and crown.
Signs Your Existing Cap Is Done
Look for rust streaking down the outside of the cap, visible gaps between the cap and the flue tile, or a cap that’s shifted off-center. If you can see light through the mesh screen in more than a few spots, water and embers are getting through. On Lewisville’s older ranch homes, we also see a lot of caps that were installed decades ago with a simple clamp that’s since corroded.
Replacing the Cap, Not the Whole Crown
Most cap replacements run $180 to $340 in the Lewisville market, including the new cap and labor. We’ll tell you plainly if the crown underneath is still sound and only the cap needs attention. We never sell a crown rebuild when a cap replacement is all the work that’s actually required. The photo report you receive will show the condition of the crown, so you can see the evidence for yourself.
Trusted Brands We Service in Lewisville
We stock and install caps, liners, and accessories from Famco, Copperfield, and DuraFlex for our Lewisville customers, which means turnaround on replacement parts is fast. These are professional-grade chimney trade brands, specified by job rather than by margin. If you have a Famco cap that’s failed or a DuraFlex liner that needs a section re-seated, we work with the exact components that match your existing setup. We don’t substitute knockoff parts, and we’ll name the manufacturer on your written quote so you can verify the spec before you approve anything.
Common Chimney Repair Problems We See in Lewisville Homes
- Missing or hail-damaged caps on older masonry chimneys. Lewisville’s mid-century ranch stock near Old Town and the older streets off Lewisville Highway seems to have taken repeated hits over the years, and missing caps are the common thread. Water gets into the flue and smoke chamber, and before long the crown is spalling and the interior brick is shedding bits into the firebox.
- Loose factory-built flue liner joints in 1990s and 2000s subdivision homes. The prefab units common west of I-35E don’t behave like masonry chimneys. When a roof crew walks the ridge or a hailstorm pounds the chase top, joints between liner sections can separate. That lets creosote flakes and exhaust slip outside the intended path, which is exactly what our camera inspection is designed to find.
- Second- and third-degree creosote on the smoke chamber shelf. Homeowners in Lewisville often assume a thick, tar-like coating on the smoke chamber shelf will brush off with a standard sweep. It won’t. That’s glazed, hardened creosote and it requires a chemical treatment plus a return visit to fully neutralize. We flag this clearly in the photo report rather than letting it ride until the next cleaning.
- Chase top failures on factory-built chimneys. In the newer subdivisions, the galvanized chase top that covers the entire prefab chimney is often the first component to go. Once rust opens a seam, water runs down inside the chase and onto the flue pipe itself. A simple chase top repair can prevent what would later become a full flue liner replacement.
Pricing for Chimney Repair in Lewisville, WA
A standard chimney cap replacement in Lewisville runs $180 to $340, and a new cap installation with mechanical fastening runs $225 to $450. If you’re looking at spalling brick repair or mortar repointing, expect $400 to $900 depending on how many courses of brick are involved. Flue liner joint repairs and re-seating work typically land between $500 and $1,200. A full chimney rebuild at the roofline is the high end of the range, usually $1,800 to $2,500. The price we quote before booking is the price on the invoice. It includes the camera inspection and the photo report, so you’re not paying extra for evidence of what was found. Call (830) 251-4560 for a free estimate and we’ll give you a written number before any work is scheduled.
We Also Serve Cities Near Lewisville
Our Lewisville customers often ask if we cover the surrounding communities. We do. Our Chimney Repair team handles jobs in Seattle, Spokane, Tacoma, and Vancouver. If you live just outside Lewisville and need the same flat-price, written-guarantee service, call and ask. We’ll confirm coverage for your address when you book.
Serving Lewisville, WA - Our Local Coverage Area
We’re based in the Lewisville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Lewisville
Once a year, and the reason in Lewisville has less to do with creosote buildup and more to do with hail, roof work, and the two very different chimney types common in the area. A mid-century masonry chimney near Old Town and a 1990s prefab flue in a Castle Hills subdivision fail in different ways, and only the prefab failure is invisible from the ground. We recommend a Level 2 inspection with the camera every 12 months here, and we’ll tell you if you can stretch it to 18 months. Call (830) 251-4560 with your address and we’ll give you an honest answer for your specific chimney.
Yes. We give a written price before any work starts, and that’s a rule under the Garrison Standard, not a courtesy. For a cap replacement in Lewisville, that means a range of $180 to $340. The final number is a flat price agreed before the sweep is booked, and it won’t move at the door. Call (830) 251-4560, describe what you’re seeing, and we’ll give you a figure you can hold us to.
The photo report you receive is the still images captured during our camera inspection of the flue, smoke chamber, and accessible areas of the crown. You’ll see clear, labeled shots where we found a joint separation, spalled brick, or a creosote shelf that needs chemical treatment. The report pairs with the written quote so there’s no mystery about what we’re recommending and why. No repair gets recommended in Lewisville without camera evidence you can see for yourself.
A loose cap that’s still shedding water into the firebox should not wait. A small amount of missing mortar on the outer brick courses above the roofline can usually hold until the next dry stretch. The rule we use in Lewisville: anything that lets water into the flue, smoke chamber, or chase is urgent because the damage compounds; anything that’s cosmetic or exterior can wait. We’ll tell you plainly which category the problem falls in, and the photo report backs it up. If it can safely wait, we won’t push to book the work that same week. Call (830) 251-4560 and we’ll talk you through what you’re seeing.
Second-degree creosote is flaky and tar-like; third-degree is hardened, glazed, and resists brushing entirely. If our camera inspection in your Lewisville home shows either on the smoke chamber shelf, the process involves a chemical treatment applied on the first visit, then a follow-up sweep once it has had time to break down. We don’t pretend a standard brushing will solve it, and we don’t leave it in place because it’s a chimney fire risk. The treatment and the return visit are written into your quote before we start.
If you’re in Lewisville and you want a written price, a camera inspection with a photo report, and a repair that carries a full-year guarantee, call us at (830) 251-4560. A live person answers, day or night. We’ll give you the number before any work is booked, and we’ll stand behind every repair in writing.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Lewisville and the surrounding Clark County area.