Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Mansfield
Chimney repair in Mansfield usually starts with water, not fire. The black clay that runs under most of this city swells in spring rains and shrinks through summer droughts, and that motion finds its way into mortar, crowns, and flashing. What we fix most often are the slow leaks that result: cracked caps, failed flashing at the roofline, spalled brick faces where trapped moisture froze and popped the face off the brick. A typical repair here runs $300 to $950 for crown and flashing work; a full chimney rebuild in Mansfield lands between $2,800 and $6,500 depending on height, access, and how far the masonry has gone. Call (830) 251-4560 and we’ll put a written price in your hands before any work starts.
Why Flint Chimney Sweep Is Mansfield’s Preferred Chimney Repair Company
We work in Mansfield every week, and the houses here tell a consistent story: brick veneer over wood frame, chimneys on outside walls, and thirty-plus years of Barnett Shale clay movement taking a toll on the masonry. Homeowners around Walnut Creek, Lowes Farm, and the neighborhoods off East Broad Street call us when a chimney company no-shows or shows up with a price that shifts at the door. Flint Chimney Sweep runs differently. Every job, from a cap replacement to a full rebuild, gets a written price before work begins and a 365-Day Done Right Promise in writing: if the repair fails within a year, we come back and make it right at no charge.
Our techs are background-checked and uniformed, and the phone is answered by a live person around the clock, not a voicemail tree. Hank Delano leads our crews with one standing rule: document everything. You’ll see the camera footage, you’ll get the photos, and you’ll know exactly what needs doing now and what can safely wait. That’s the Garrison Standard, the same code every Garrison Partners location follows since 2002.
Chimney Cap Replacement in Mansfield
Chimney cap replacement is one of the most common repairs we do in Mansfield, because the cap is the first thing hail finds. A standard galvanized cap with a spark screen runs $145 to $320 installed; a stainless steel cap, which we recommend for anyone planning to stay in the house more than a few years, runs $280 to $550 installed. The cap keeps rain, birds, and embers out of the flue, and when it’s dented, rusted, or missing entirely, everything below it takes the weather.
When a Mansfield cap has failed
You’ll see rust streaks down the chimney chase, hear birds in the flue, or find water in the firebox after a hard rain. Hail dents caps and knocks the spark screen loose. High wind off the open ground east of town bends the support brackets. If we’re already on the roof for flashing work, we check the cap as part of the job.
What replacement involves here
We match the cap to the flue tile size, not the other way around. In Mansfield we stock standard sizes locally, so a cap replacement is usually a one-visit job. Olympia Chimney and Copperfield are the two brands we install most in this area because they hold up to north Texas hail better than the thin caps we see peeling on older homes.
Chimney Liner Installation in Mansfield
Chimney liner installation means replacing the inner liner that channels smoke safely out of the house. In Mansfield, a stainless steel liner (we install DuraFlex and Olympia Chimney systems) runs $1,800 to $3,400 installed for a typical single-story home; a HeatShield resurfacing job, where the existing clay liner is still structurally sound but cracked, runs $2,200 to $4,000. The liner is the difference between smoke going up the flue and smoke bleeding through brick into your attic and walls.
Signs a Mansfield liner has failed
Flakes of clay tile in the firebox, a smoky smell upstairs after a fire, or a creosote glaze that keeps coming back a few months after a sweep. The Barnett Shale clay movement cracks clay liners over time, and once a crack opens, it grows every season. A camera inspection shows it in ten minutes.
Which liner option fits which house
If the existing clay liner is mostly intact with hairline cracks, HeatShield can often be applied and back in service fast. If the liner has shifted or the masonry around it is compromised, we recommend a full stainless steel liner. We never recommend a liner you haven’t seen on camera. You get the footage before you approve the work.
Trusted Brands We Service in Mansfield
We install and work with professional-grade chimney materials, and we name them on the invoice: DuraFlex stainless steel liners, HeatShield resurfacing compound, Olympia Chimney caps and dampers, Famco flashing, Copperfield caps. None of this gets priced by margin. The material gets selected by the job, and you’ll see the brand spec in your written quote before we start. Standard parts for Mansfield’s common chimney sizes are stocked locally, which shortens most repair timelines on our Chimney Repair calls.
Common Chimney Repair Problems We See in Mansfield Homes
- Cracked chimney crowns from clay movement. The Barnett Shale clay under Mansfield expands when wet and contracts when dry, and over a few decades that motion works its way up through the chimney. Crowns crack, then wind-driven rain gets in and freezes the mortar from inside.
- Failed flashing at the roofline. Hail and high wind loosen the flashing where the chimney meets the roof, especially on the west-facing slopes that take Mansfield’s summer storms head-on. A rust line on the ceiling near the chimney is the tell.
- Spalled brick faces from trapped moisture. Water gets behind the brick face through cracked mortar, then a Mansfield freeze pops the face off the brick. You’ll see brick chips on the roof or in the yard below the chimney.
- Creosote glaze in rarely swept flues. Homeowners here burn only a few times a season, skip the annual sweep, and creosote climbs from a brushable first-degree layer to a tar-like third-degree glaze. Third-degree creosote is a fire hazard and needs chemical treatment before a standard sweep will touch it.
Pricing for Chimney Repair in Mansfield, TX
Here are the ranges we quote in Mansfield. Chimney cap replacement: $145 to $550. Flashing repair: $300 to $750. Crown repair or rebuild: $500 to $1,200. Tuckpointing or mortar repointing: $350 to $1,100 depending on access. Chimney waterproofing: $250 to $600. Full chimney rebuild: $2,800 to $6,500. Liner installation: $1,800 to $4,000. What moves the number is height, roof pitch, and how far the masonry has deteriorated. The written price we hand you is the price on the invoice. Call (830) 251-4560 for a free estimate and we’ll put numbers in writing.
We Also Serve Cities Near Mansfield
Our crews cover Chimney Repair in Mansfield and the surrounding area daily. We regularly work homes in Arlington, Kennedale, Venus, and Burleson, with the same written pricing and the same 365-Day Done Right Promise on every job, in every city.
Serving Mansfield, TX - Our Local Coverage Area
We’re based in the Mansfield area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Mansfield
Once a year if you burn wood at all, and once every two years if you only burn a few evenings in January. The problem in Mansfield is the occasional-use fireplace: a handful of fires each season still deposits creosote, and when the flue stays warm and damp through our humid springs, that creosote hardens and clings instead of flaking off. A yearly sweep is cheaper than a liner job. Call (830) 251-4560 to book a sweep and we’ll put the written price in your hand before we start.
First-degree creosote is a flaky black dust that brushes out easily with a standard sweep, which runs $189 to $280 in Mansfield. Second-degree is a crunchy, tar-like buildup that needs rotary rods and takes longer, usually $250 to $400. Third-degree is a hard, shiny glaze, and it is a chimney fire waiting to happen. It requires chemical treatment and multiple passes, and in Mansfield we quote $400 to $700 depending on flue size and access. The degree of creosote is the single biggest variable in sweep pricing, and we show it to you on camera before we quote it.
Yes. Every repair inspection includes a camera run through the full flue, and we give you a photo report of what we found. You keep the images. If we recommend crown work or a liner, you’ll see the cracks or the shifted tile in the photos before you approve a dollar of work. No repair is recommended on trust alone.
Hairline cracks can usually wait a few months, through the spring dry season, if you’re not seeing water in the firebox or rust on the damper. Cracks wider than about an eighth of an inch, or cracks that have opened up after a hard rain, should be addressed before the next freeze. The Barnett Shale clay keeps working, and a crack never closes on its own. We’ll tell you plainly if it can wait or if it needs action, and you’ll see the camera footage to back up the call. Call (830) 251-4560 and we’ll come look.
We do not promise same-day service, and we won’t rush a repair to hit a clock. Most Mansfield calls are booked within a week, and emergency situations (heavy water intrusion or an active chimney fire risk) get prioritized. Chimney work in Mansfield is seasonal, and the sensible time to book is before burning season or before the spring storm line arrives. Estimates are free, and the phone is answered by a person twenty-four hours a day.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Mansfield, TX since 2002.