Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Tacoma
Chimney repair in Tacoma runs $425 to $2,900 for most jobs, with a written price before any work starts. That’s the number we hand you, the number you approve, and the number on the invoice. Flint Chimney Sweep serves every Tacoma neighborhood, from the North End to South Tacoma, with background-checked technicians who show up in uniform and on time. Call (830) 251-4560 for a free estimate, and you’ll get a live person, not a voicemail tree.
Why Flint Chimney Sweep Is Tacoma’s Preferred Chimney Repair Company
Tacoma homeowners deal with a specific kind of chimney problem: water. Our wet winters and the freeze-thaw cycles that come off Puget Sound punish brick crowns, flashing, and caps harder than almost anything else. We’ve repaired hundreds of chimneys in Tacoma, and the pattern holds: the damage is rarely from too much burning, and almost always from too much rain finding its way in. That local knowledge shapes how we diagnose, what we quote, and what we recommend.
Flint Chimney Sweep has operated since 2002 as part of the Garrison Partners family of independently owned chimney service companies. Every repair carries the 365-Day Done Right Promise: a written guarantee valid for one full year from the service date. If a covered repair fails, we return at no charge. No argument, no second invoice. Tacoma homeowners hear plenty of promises. Ours is written down.
Our phones are staffed by a live person 24 hours a day, seven days a week. When you call about a chimney repair in Tacoma, you talk to a human being who can schedule your estimate. You won’t leave a message and wait for a callback that never comes.
Chimney Flashing Repair in Tacoma
Chimney flashing repair is one of the most common jobs we do in Tacoma, because the metal that seals the seam where your chimney meets the roof takes a beating in our climate. Rain, wind off the Sound, and the constant expansion and contraction of roofing materials all work against that seal. When flashing pulls away or corrodes through, water runs down the chimney chase and into the attic, the smoke chamber, or the firebox. You’ll see it as a rust stain on the brick, a damp smell near the fireplace, or a damper that sticks. Flashing repair in Tacoma typically runs $425 to $850, depending on the roof pitch and how much of the existing flashing needs to be pulled and replaced.
Signs Your Flashing Needs Work
Rust stains running down the brick above the firebox are the clearest signal. A musty smell in the room after rain is another. If you can see daylight through the seam from inside the attic, that’s an open leak. None of these fix themselves, and the longer water travels, the more expensive the repair becomes.
What the Repair Actually Involves
We cut out the failed metal, inspect the wood and brick beneath, and install new flashing with a proper counter-flashing overlap. We use Copperfield materials on most Tacoma jobs because they hold up to salt air and constant moisture better than thin, big-box flashing. The seal gets a written guarantee, same as every repair we make.
Chimney Crown Repair in Tacoma
Chimney crown repair is the other repair we emphasize for Tacoma homes, and for good reason. The crown is the concrete slab on top of your chimney that sheds water away from the flue and the brick below. Tacoma’s freeze-thaw cycle cracks crowns faster than dry climates, and once a hairline crack opens, water gets into the brick. That’s how spalling starts, the crumbling, flaking brick you see on older chimneys all over the North End and the Proctor District. Crown repair in Tacoma typically runs $600 to $1,400, depending on whether we’re sealing cracks or rebuilding the crown entirely.
Hairline Crack or Full Rebuild
A narrow crack can sometimes be routed and sealed, which is the lower end of that price range. But if the crown has spalled, crumbled at the edges, or pooled water on top, we’re rebuilding it. That means forming a new crown with a proper drip edge so water runs off instead of running down the brick. Both options get the same written, one-year guarantee.
Why Tacoma Crowns Fail Faster
Moisture gets into the concrete pores, then freezes and expands. Over a typical Tacoma winter, that cycle repeats dozens of times. A crown that looked fine in October can show a visible crack by March. That’s not bad luck. That’s the climate we live in.
Trusted Brands We Service in Tacoma
We install and work with professional-grade chimney products, and we name them specifically so you can verify quality yourself: DuraFlex for flue liners, Olympia Chimney for caps and dampers, and Copperfield for flashing and chase covers. These aren’t off-brand parts picked by margin. They’re specified by the job, because a chimney repair in Tacoma has to hold up to real weather. We keep common parts stocked locally for Tacoma customers, which means less waiting when a repair moves from quote to completion.
Common Chimney Repair Problems We See in Tacoma Homes
- Spalling brick and crumbling crowns. Freeze-thaw cycles off Puget Sound force moisture deep into brick and concrete, then blast it apart from the inside. This is weather damage, not fire damage, and it’s the single most common repair we make in Tacoma.
- Rusted-through caps and pulled flashing. A rusted chimney cap lets rain fall straight down the flue into the smoke chamber. You’ll smell it before you see it, especially in an older home in the North Slope or Stadium District.
- Glazed creosote on underused flues. A chimney that barely burns in Tacoma’s mild summers collects first-degree creosote, then that creosote dries and hardens into a tar that a brush alone can’t remove. We can identify the degree before we quote.
- Water-damaged smoke chambers. When a crown or flashing fails for years without repair, water soaks into the smoke chamber brick. That shows up as a damper that won’t open, a firebox that smells like wet mortar, or crumbling surfaces you can see with a camera inspection.
Pricing for Chimney Repair in Tacoma, WA
Here’s where Tacoma homeowners actually land. Chimney flashing repair runs $425 to $850. Crown repair runs $600 to $1,400. Mortar repointing on a typical Tacoma chimney runs $500 to $1,200, and a partial chimney rebuild can run $1,800 to $2,900. Full flue relining with DuraFlex lands between $2,400 and $3,800. What moves the number: roof pitch, chimney height, how much brick has to come out, and whether we’re sealing or rebuilding. You get a written price before any work starts, every time. Call (830) 251-4560 for a free estimate; you’ll know the exact number before you approve anything.
We Also Serve Cities Near Tacoma
Our crews serve Tacoma and the surrounding South Sound communities, including Milton, University Place, Puyallup, and Federal Way. If you’re just outside the city line, the same written-price process applies. Same guarantee, same crew standards, same call line.
Serving Tacoma, WA - Our Local Coverage Area
We’re based in the Tacoma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Tacoma
Once a year, full stop. Even if you burn a handful of times each winter, your chimney is sitting through Tacoma’s wet season collecting water intrusion. The inspection catches crown cracks, flashing failure, and cap rust before they become a $2,900 rebuild. A chimney you don’t use still gets damaged by rain; it just hides the damage longer. Call (830) 251-4560 to schedule, and we’ll confirm the exact time window when we book.
We come out, inspect the chimney from top to bottom, and run a camera through the flue. Then we sit down with you and show you the photos. You see exactly what we see: the crack, the rust, the pulled flashing. Then we hand you a written price. You don’t pay for anything you haven’t approved on paper. That’s how we’ve done every repair in Tacoma since day one.
Yes. We camera the flue and identify the creosote stage on the spot. First-degree is a dusty soot a sweep can remove. Second-degree is a hardened, flaky glaze that needs mechanical tools. Third-degree is a dense, tar-like buildup that typically requires chemical treatment or a professional-grade rotary system. The price changes with the stage. If we can’t remove it with a standard sweep, you’ll know before you commit to a repair. Call (830) 251-4560 to ask about a camera inspection.
We don’t promise same-day service, and we’d rather be straight about that than overpromise. Repairs are booked on a schedule, and Tacoma’s real urgency is seasonal: you want water intrusion sealed before the wet months, not during a downpour. We’ll get you on the calendar quickly, and we’ll give you the honest timeline when you call. If it’s an active leak, we’ll tell you exactly what to do to protect your home until we arrive.
In Tacoma, it shouldn’t wait. Every wet season the crack or gap takes on more water, and that water freezes and thaws through dozens of cycles between November and March. A small crown repair done in fall costs hundreds. The same chimney left until April can turn into spalled brick and a partial rebuild. If the flashing has already pulled away and water is actively entering, that’s an active leak, not a cosmetic issue. Call (830) 251-4560 and we’ll tell you straight whether it can wait a season or needs attention now.
Call Flint Chimney Sweep for Chimney Repair in Tacoma, WA
You’ll get a live person on the line, a straight answer about what’s wrong, and a written price before a single tool comes off the truck. That’s the Chimney Repair process we’ve run since 2002, and it’s how we serve every homeowner in Tacoma. Call (830) 251-4560 now for your free estimate.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Tacoma since our founding in 2002.