Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Travis Ranch
Chimney repair in Travis Ranch typically costs $350 – $2,800 depending on the job, with most repairs completed in a single visit. We run crews throughout Travis Ranch weekly and schedule repair work around your burning season, not ours. If you’re seeing water stains near the chimney, hearing a damp, smoky draft, or noticing crumbling mortar on the brickwork, call (830) 251-4560 and we’ll give you a written price before any work begins.
Travis Ranch homes sit on rural lots, and that changes how we approach chimney work here. Properties aren’t packed tight like they are in Garland or Mesquite. They’re spread out, often with wood stoves running as a primary heat source through the winter. That means heavier creosote loading, older flue construction, and repair needs that differ from what a suburban chimney company usually sees. We know the difference because we work these properties every week.
Why Flint Chimney Sweep Is Travis Ranch’s Preferred Chimney Repair Company
We’re part of the Garrison Partners family, founded in 2002, and we operate under a written code called The Garrison Standard. That code says the price you approve in writing is the price you pay, every repair carries a one-year written guarantee, and if a covered repair fails within that year, we return and fix it at no charge. No argument, no chargeback negotiation, no fine print.
Travis Ranch homeowners tell us the same thing: they’ve been burned by chimney companies that quote one number over the phone, then “discover” a problem that triples the invoice after the work starts. We don’t work that way. Our techs are background-checked and uniformed, and every job gets a written scope and price before a tool comes off the truck. You’ll know the exact number on the invoice before we begin, because you approved it in writing.
Phones are answered by a live person around the clock at (830) 251-4560. No voicemail tree, no callback form, no waiting until Monday. When you call on a Saturday morning in November because your stove is smoking back into the house, a real person picks up and starts scheduling.
Chimney Liner Installation in Travis Ranch
Chimney liner installation in Travis Ranch is one of the most common repairs we do, and for good reason. Many homes here have masonry fireplaces or wood stove hookups with flues that were built decades ago and never lined for modern appliance standards. The liner is the inner channel that carries smoke and combustion gases safely out of the house. When it’s cracked, undersized, or missing entirely, smoke spills into the living space and creosote settles into the masonry where it can ignite.
A Travis Ranch-specific pattern we see regularly: a homeowner buys a high-efficiency wood stove, connects it to an existing masonry flue, and discovers the draft is terrible. That’s because modern stoves need a properly sized, insulated liner to maintain flue temperature and draw. An oversized or uninsulated flue cools the smoke too quickly, and creosote condenses inside at an accelerated rate.
We install DuraFlex stainless steel liners, a professional-grade system rated for wood-burning applications. A typical liner installation in Travis Ranch runs $1,800 – $3,200, depending on flue height, access, and whether the old clay tile needs to be removed first. Every liner installation carries our one-year written guarantee, and we’ll show you camera footage of the completed flue before we call the job done.
When a Travis Ranch Wood Stove Needs a New Liner
If you’re burning a cord of wood every month, your stove is drafting poorly, or you see smoke staining around the stovepipe connection, the liner is usually part of the problem. We camera-inspect the full flue, show you what we find, and tell you honestly whether a liner replacement will solve the issue.
What Liner Installation Involves
We run a stainless steel liner from the stove connection to the chimney crown, insulate it where the flue passes through cold attic space, and secure the top plate and cap. The work typically takes one day for a single-story ranch and may require a lift for steep rooflines.
Chimney Flashing Repair in Travis Ranch
Chimney flashing repair in Travis Ranch is the fix most homeowners don’t know they need until water shows up on the ceiling. Flashing is the sheet metal that seals the seam where the chimney meets the roofline. Travis Ranch roofs take a beating from Texas thunderstorms and high winds, and when flashing lifts, rusts, or pulls away from the brick, water gets underneath and works its way into the attic and living space.
We repair and replace flashing with copper or galvanized steel cut to fit the existing roofline, sealed with professional-grade materials, and integrated with the roof so water sheds away from the chimney. A flashing repair in Travis Ranch typically runs $450 – $1,200 depending on the size of the chimney and how much of the surrounding roof needs to be reworked. This is the fix that prevents the expensive one, since water intrusion is what destroys fireboxes, rusts dampers, and rots roof decking over time.
Signs Your Flashing Has Failed
Look for water stains on the ceiling around the chimney chase, rust on the damper or throat area, or faded paint on the ceiling near the fireplace. These show up days after heavy rain, not during the storm itself.
Flashing Repair Without Replacing the Whole Chimney
In most cases, flashing repair is a one-day job that doesn’t touch the interior of your home at all. We remove the old material, inspect the masonry underneath, install new flashing, and test with a water run. If the brick behind the flashing is spalled or crumbling, we’ll show you and quote the additional repair separately before doing any work.
Trusted Brands We Service in Travis Ranch
We don’t install whatever’s cheapest off a distributor’s shelf. We work with professional-grade chimney products from HeatShield, Gelco, Olympia Chimney, and Famco, and we specify the product by the job, not by the margin. That means when we recommend a Stainless liner, we’re doing it because a wood stove in Travis Ranch needs stainless to handle constant creosote and high flue temperatures. When we resurface a firebox, HeatShield is the right ceramic product for the job. We keep common parts and materials stocked for Travis Ranch runs, which means less waiting on a slow supply chain when your chimney is down.
Common Chimney Repair Problems We See in Travis Ranch Homes
- Glazed third-degree creosote from burning unseasoned wood or trash. We see this in wood stoves all over Travis Ranch when oak is burned before it’s had a full season to dry. Glazed creosote is the most dangerous form and requires mechanical removal with a rotary loop rather than a standard brush sweep.
- Cracked and spalling chimney crowns. The crown is the concrete cap on top of the chimney. Texas freeze-thaw cycles crack it, water gets in, and the brick starts spalling. We repair crowns by applying a waterproof sealant and rebuilding the damaged cap area.
- Missing or damaged chimney caps. A missing cap lets rain pour straight down the flue and rusts dampers and fireboxes. It’s a small fix that prevents a large one.
- Improperly sized flue liners for modern wood stoves. Older Travis Ranch homes often have smoke chambers and flue sizes that were built for open fireplaces, not stoves. We measure, inspect, and reline when the draft or creosote buildup shows the existing flue can’t handle the appliance.
Pricing for Chimney Repair in Travis Ranch, TX
Here’s what we charge in Travis Ranch, written plainly. A mortar repointing job on one face of a chimney runs $600 – $1,400. Spalling brick repair runs $400 – $1,200 depending on how many bricks need replacement. Chimney waterproofing with a vapor-permeable sealant runs $400 – $800. Flashing repair is $450 – $1,200. Chimney rebuilding, where we reconstruct partial or full masonry, starts around $1,500 for a crown rebuild and can exceed $4,000 for a full tear-down and rebuild. Liner installation runs $1,800 – $3,200 as described above.
What changes the price:
- Chimney height and roof access. A single-story ranch is easier to reach than a three-story Victorian.
- How much masonry needs cutting or removal.
- Whether the repair is caught early or after water and creosote have done months of damage.
We don’t stack on surprise line items. You approve a written price before we start. Call (830) 251-4560 and we’ll give you a number for your exact situation, free.
A quick note on dispatch: scheduling and coordination for Travis Ranch are handled from the brand’s Dallas-Fort Worth office. Our crews work Travis Ranch properties locally, not as a side trip from another market.
We Also Serve Cities Near Travis Ranch
Our teams handle Chimney Repair work across the greater North Texas and Central Texas footprint, including Houston, San Antonio, Dallas, and Fort Worth. If you own a property in Travis Ranch or a neighboring community, we can schedule an inspection and written estimate. Check the full Chimney Repair in Travis Ranch page for neighborhood-specific notes.
Serving Travis Ranch, TX - Our Local Coverage Area
We’re based in the Travis Ranch area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Travis Ranch
You should sweep after every cord of wood burned. For a Travis Ranch household burning wood as a primary heat source through the winter, that usually means two to four sweeps per year, not the once-a-year schedule common in suburban homes. Creosote accumulates faster in rural properties because wood stoves burn longer, hotter cycles, and unseasoned or wet wood accelerates the buildup. The simplest rule: when the wood pile drops by a cord, call us for a sweep. Call (830) 251-4560 and a live person will schedule your sweep at a time that works for your burning schedule.
First-degree creosote is a fine, sooty powder that brushes off easily. Third-degree creosote is a hard, glazed tar that forms when flue temperatures cycle hot and cold, and it burns at extremely high temperatures once ignited. A chimney fire driven by glazed creosote can crack liners, damage masonry, and spread to the roof. We find third-degree creosote frequently in Travis Ranch wood stoves burning unseasoned oak or trash. If you have third-degree buildup, a rotary cleaning and possible liner change may be required before the chimney is safe to use.
Yes. We install stainless steel liners for wood stoves and fireplaces throughout Travis Ranch. We use DuraFlex stainless liner systems because they’re rated for constant wood-burning use and hold up to high flue temperatures. If your existing flue was built for an open fireplace and you’ve since added a wood stove, we’ll camera-inspect the flue, measure the draft, and tell you whether a liner will fix the smoke and creosote problems. Call (830) 251-4560 for a free estimate on liner installation.
In most cases, yes. Flashing repair is usually a one-day job that involves removing the old material, inspecting the brick behind it, installing new flashing, and water-testing the seal. You do not need a new chimney just because flashing has failed. The repair runs $450 – $1,200 in Travis Ranch depending on chimney size and roof pitch. The key is to fix it before water gets into brick and firebox, because that’s when it becomes a larger repair. Call (830) 251-4560 for an exact quote.
Get it quoted and repaired before the next wet season. A cracked crown lets water into the chimney core. That water freezes in a Texas cold snap, expands, and pushes the brick apart. The longer spalling goes unchecked, the more face brick you lose, and partial chimney rebuilding becomes necessary. We repair crowns by applying a waterproof membrane and resealing the surface, and we replace spalled brick before structural damage spreads. In Travis Ranch, a crown repair with brick replacement typically runs $900 – $1,800 per face. Call (830) 251-4560 for a written estimate.
Getting a Repair Scheduled in Travis Ranch
Our techs arrived at a home off Travis Ranch Boulevard where the owner had been burning unseasoned oak in a cast-iron stove all winter. Three years of that, and the flue was coated in glazed creosote, with a cracked firebox that had been letting heat into the masonry itself. We installed a stainless liner, rebuilt the firebox with ceramic resurfacing, and told him plainly to switch to seasoned hardwood. The next cold snap he called to tell us the draft had never drawn that well and the stove wasn’t eating wood nearly as fast. That’s the standard we hold in Travis Ranch: real diagnosis, written price, and a fix that lasts.
If your chimney is showing signs of trouble, or if you just want a camera inspection before the season starts, call (830) 251-4560. A live person answers, day or night. We’ll give you a written price, show you what we find on camera, and stand behind the work for a full year.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Travis Ranch as part of the Garrison Partners family.