Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Company in Artondale, WA
Flint Chimney Sweep handles chimney cleaning, inspection, and repair for homes throughout Artondale, WA, with pricing put in writing before any work starts. Artondale’s mix of 1970s through 1990s construction and newer builds means chimneys here range from original clay-tile masonry to modern prefab systems, and each type ages differently in the damp Puget Sound climate. If you need a sweep, a level of inspection, or a repair quote, call (830) 251-4560 and a live person answers, day or night.
Why Artondale Homes Are Different
Artondale sits a few miles east of Gig Harbor’s waterfront, spread across wooded lots and rolling terrain that backs up to the water on one side and State Route 16 on the other. Homes here run the full span: mid-century ramblers with original brick chimneys, 1980s split-levels with masonry stacks, and newer construction with factory-built chimney pipe. The Pacific Northwest’s wet season, which runs roughly October through April, punishes any chimney that has not been properly maintained. Moisture works into cracked mortar, rusts metal components, and creates the conditions where creosote binds to flue walls instead of brushing away easily.
We see more moss growth and surface spalling on Artondale chimney crowns than in drier parts of the state, simply because the crowns never fully dry out between storms. Wooded lots add another layer: needles, moss debris, and fir cones end up in chimneys without screened caps, and raccoons and squirrels are common in the area. Homes on larger parcels east toward 46th Avenue Northwest often burn regularly all winter, while waterfront-area homes may only burn seasonally, and that difference in usage changes how often a chimney should be swept.
Permit-wise, routine sweeping and inspection do not trigger anything at the City of Gig Harbor (which serves Artondale for building matters). Repairs that alter the firebox, replace a liner, or rebuild masonry above the roofline can require a permit, and we tell you at the quote stage exactly what will be needed for your specific job.
Our Main Artondale Services
These are the three services Artondale homeowners call us for most often. Each has its own page with specific pricing, process detail, and local recommendations.
Chimney Sweep in Artondale
A standard chimney sweep in Artondale means removing creosote, soot, and any debris that has accumulated in the flue and smoke chamber, then doing a visual check of the firebox, damper, and cap. In Artondale, we pay particular attention to chimneys that have gone a few seasons without service, because the damp climate tends to harden creosote and it takes longer to remove properly than in drier regions. Every sweep includes a basic condition report and photos of anything we flag. See the full breakdown on the Chimney Sweep in Artondale page.
Chimney Inspection in Artondale
Chimney inspection in Artondale follows the three-level system from the National Fire Protection Association: Level 1 for routine maintenance, Level 2 when something has changed (new appliance, property transfer, suspected damage), and Level 3 when a Level 2 finds a problem that requires opening part of the structure. Artondale’s older homes in particular benefit from a Level 2 inspection when a house changes hands, because hidden flue damage from past neglect is common and rarely visible from the ground. Details and pricing are on the Chimney Inspection in Artondale page.
Chimney Repair in Artondale
Chimney repair in Artondale covers everything from crown sealing and mortar joint repair to full flue relining with HeatShield or DuraFlex systems. The wet winters here mean a cracked crown is not a cosmetic issue; water gets in, freezes, and accelerates damage on every freeze-thaw cycle. We carry products from HeatShield, Gelco, Olympia Chimney, and Famco, and every repair we perform carries a written guarantee valid for one full year. See what is covered and what it costs on the Chimney Repair in Artondale page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Artondale
Our technicians routinely work with HeatShield resurfacing systems, Gelco and Olympia Chimney caps and chase covers, and Famco accessories. We keep common parts at our Seattle dispatch hub so most Artondale repair jobs do not wait on a national backorder. See the full list of what we stock and support on our brands page.
Pricing for Chimney Company in Artondale, WA
These are the prices you can expect to see on a Flint Chimney Sweep quote in Artondale. Every quote is delivered in writing before the job starts, and the number you approve is the number you pay.
| Service | Typical range in Artondale |
|---|---|
| Standard chimney sweep (open fireplace, one flue) | $180 – $260 |
| Chimney sweep with heavy creosote buildup | $245 – $375 |
| Chimney sweep for a wood stove | $200 – $285 |
| Level 1 chimney inspection | $110 – $175 |
| Level 2 chimney inspection (with camera) | $275 – $400 |
| Crown repair or reseal | $400 – $900 |
| Chimney cap supply and install | $225 – $450 |
| Mortar joint repointing (per 10 sq ft) | $450 – $800 |
| Flue relining with HeatShield (single flue) | $1,200 – $2,800 |
| Flue relining with stainless steel (single flue) | $2,000 – $4,200 |
What pushes a price to the upper end of those ranges in Artondale is usually access: steep roofs, tall chimneys, tight clearances, or a flue that has gone years without service. The quote still comes in writing first, so there is no guessing on the day of the work.
Neighborhoods We Serve in Artondale
We cover all of Artondale and the surrounding unincorporated Pierce County pockets. Homes off Wollochet Drive, along 40th Street Northwest, and throughout the tree-lined lanes north of Highway 16 are all in our regular rotation.
- Artondale proper, including wooded lots east toward 46th Avenue Northwest
- Areas along Wollochet Drive Northwest and Crescent Valley Drive
- Neighborhoods north of the junction of Hunt Street and Artondale Drive
- Patches near the intersection of 40th Street Northwest and 62nd Avenue Northwest
- Waterfront-adjacent properties west toward Henderson Bay
Most Artondale sweeps and inspections are scheduled within three to five business days, and we batch calls in the Gig Harbor area to keep travel time from eating into your day.
Service Area – Cities Near Artondale
Flint Chimney Sweep serves homeowners across Washington, with crews covering the Puget Sound region and beyond. If you are outside Artondale, we also work regularly in Seattle, WA, Tacoma, WA, Vancouver, WA, and Spokane, WA. Scheduling for Artondale is coordinated from our Seattle dispatch office, with local crews running the calls.
Serving Artondale, WA - Our Local Coverage Area
We’re based in the Artondale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Artondale
Most sweeps and inspections in Artondale are scheduled within three to five business days. Repairs often take a week or two, depending on the parts involved. Call (830) 251-4560 and a live person will pull up the schedule, not send you to voicemail.
For routine sweeps and inspections, no. If repairs involve open flame, structural masonry work, or liner replacement, permits may apply through the City of Gig Harbor, and we tell you before the quote is finalized. HOA requirements are set by each neighborhood association, so check your covenants if you live in a governed community.
Yes. Every job, from a standard sweep to a full relining, receives a written price before any work begins. That is The Garrison Standard, and it does not change based on the day of the week or how the job goes. If a covered repair fails within one year, we return at no charge.
Get an inspection before lighting the first fire. Damp Artondale winters cause mortar to degrade and debris to collect, and the first burn after years of disuse is when hidden problems become emergency problems. A Level 2 inspection with camera documentation costs $275 – $400 and tells you exactly what you are working with.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Artondale Customers Say
"Great sweep. Only thing, the appointment window ran long and I waited. Cleanup was spotless though."
- Marge P."Sweep showed up on time, in uniform, and ran a tight job. Cleaned the flue, inspected the firebox, and gave me a short written report. Veteran-run and it shows."
- Walt R."Chimney repair on loose bricks near the top. Tuckpointed it so it matches. Looks right."
- Rosa H.