Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Aldine
Chimney repair in Aldine, TX typically runs between $350 and $2,800 depending on what the camera finds, and most jobs are finished in a single visit. That’s the honest answer. The harder question is what actually needs fixing, and that’s where our process in Aldine is different: we inspect first, show you the photos, then hand you a written price before any tool comes off the truck. If you’re noticing water stains near the hearth, a smoky smell after fires, or spalling brick on the chimney stack, call (830) 251-4560. We’ll walk through what you’re seeing and schedule a time that works.
Why Flint Chimney Sweep Is Aldine’s Preferred Chimney Repair Company
We’ve worked on enough Aldine chimneys to know what this area throws at a masonry flue. The housing stock here leans heavily on 1950s through 1970s ranch homes, many built with single-wythe brick and no clay tile liner. That’s not a flaw in your house, it’s just how Aldine was built, and it means the repair approach has to account for it. Our techs know the difference between a chimney that needs a cap replacement off Aldine-Westfield Road and one in Greensbrook that needs a full liner evaluation. That local familiarity is not marketing. It shows up in what we check first.
Every Flint Chimney Sweep call in Aldine follows The Garrison Standard, the same code every Garrison Partners location operates under since 2002. That means a background-checked, uniformed technician, a written price before work begins, and a 365-Day Done Right Promise: if a covered repair fails within one full year, we return at no charge. No fine print. No callback forms. A live person answers our phone 24/7, which matters when you’ve got water coming through the ceiling at 9 p.m. and you need to know whether it’s urgent or can wait.
Chimney Cap Replacement in Aldine
Chimney cap replacement in Aldine runs $250 to $600 for most single-flue homes, and it’s one of the most common repairs we handle after a Level 2 camera inspection. The cap is the metal lid that sits atop the flue and keeps rain, birds, and debris out of the chimney. In Aldine’s humid Gulf Coast climate, a rusted or missing cap means wind-driven rain gets straight into the flue, which accelerates mortar erosion and rusts the damper below. If you can see daylight through the top of your chimney or you’ve found birds in the firebox, the cap needs attention.
When a Cap Needs More Than Replacement
Sometimes the cap is fine but the masonry underneath it isn’t. A cracked chimney crown, the concrete slab that seals the top of the chimney, lets water behind the cap and into the brick. We’ll tell you which one’s actually failing and quote the fix accordingly. You should never be talked into a cap replacement when the crown is the real problem.
Brands We Trust for Aldine Weather
We fit Galvanized, stainless, and Copperfield caps depending on the chimney and the budget. Copperfield caps hold up especially well against Aldine’s humidity and rain, so we spec them often on older ranch homes where the original cap is toast.
Chimney Liner Installation in Aldine
Chimney liner installation in Aldine typically runs $1,800 to $4,500, with most homes falling around $2,500. The liner is the inner channel that carries smoke and combustion gases safely out of the house. In Aldine specifically, we routinely see flues from the 1950s and 1960s that were built with no proper clay tile liner, just raw brick. Those flues absorb creosote into the masonry itself and can’t be swept clean. A stainless liner solves that permanently.
What a Liner Replacement Involves
We pull the old liner sections, measure the full flue run with a camera, and install a new stainless liner sized to the appliance and flue dimensions. For most Aldine homes, we use DuraFlex liners, which carry a strong warranty and handle both wood-burning and gas appliances. The work usually takes a single day, and you get a photo report of the installed liner before we leave.
Do You Need a New Liner or Just a Repair?
Not every liner problem means a full replacement. If the camera shows a cracked section but the rest of the flue is sound, we can often replace just the damaged portion. We will not recommend a full liner unless we can show you exactly what the camera found. You see the photos. You make the call.
Trusted Brands We Service in Aldine
We work exclusively with professional-grade chimney materials, because a repair in Aldine should not last one season, it should last ten. That means we spec DuraFlex stainless liners for most relining work, HeatShield for smoke chamber resurfacing, and Copperfield caps for corrosion resistance in this humid climate. We keep common parts stocked for the flue sizes we see in Aldine homes off Aldine-Westfield Road, Greensbrook, and from 77032 up to 77039. That means faster turnaround on cap replacements and liner jobs and fewer return trips. When we write a repair quote, you’ll see the exact product brand and part number going on the work order.
Common Chimney Repair Problems We See in Aldine Homes
- Single-wythe brick flues without clay liners. Homes built in Aldine before the mid-1970s were often built with brick-only flues. Creosote soaks into the masonry, a brush can’t remove it, and it becomes a fire hazard that only a camera inspection will catch.
- Spalling brick from Gulf Coast moisture. High humidity and wind-driven rain off the Gulf get into the masonry through cracked crowns and failed flashing. The brick face pops off in sheets, and if you’re seeing brick fragments in the yard, that’s spalling, not normal settling.
- Rusted dampers and damaged fireboxes. Water intrusion from a missing cap or failed flashing works its way down to the damper and firebox. You’ll notice a stiff damper, rust streaks in the firebox, or a musty smell in summer.
- Creosote buildup in rarely-used fireplaces. Many Aldine homeowners assume a fireplace that’s used a few times a year doesn’t need attention. Creosote still forms, and in a humid climate it hardens into a glaze that’s harder to remove the longer it sits.
Pricing for Chimney Repair in Aldine, TX
Here’s what you can expect to pay in Aldine. A basic chimney cap replacement runs $250 to $600. Mortar repointing on a standard one-story chimney runs $800 to $1,800. A stainless liner installation, including the liner and labor, typically runs $1,800 to $4,500. Flashing repair falls between $400 and $1,200. Chimney waterproofing, which seals the brick against Aldine’s humidity, runs $500 to $1,000. The biggest cost driver is what the camera inspection reveals, which is why we never quote blind. You get a written price after the inspection, before any repair work starts, and if you don’t like what you see, you don’t owe us anything beyond the inspection call. Call (830) 251-4560 for an exact quote. Estimates are free.
We Also Serve Cities Near Aldine
Flint Chimney Sweep serves homeowners throughout the Houston metro. Our Aldine crews regularly handle Chimney Repair work in Houston, San Antonio, Dallas, and Fort Worth. If you live in one of those areas, the same Garrison Standard applies: written pricing, camera inspection, photo report, and a 365-day guarantee on every repair.
Serving Aldine, TX - Our Local Coverage Area
We’re based in the Aldine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Aldine
Yes, and in a 1965 Aldine home, the camera is the single most important part of the inspection. Homes built here in that era were often constructed with single-wythe brick flues without a clay tile liner. Creosote can soak into the brick itself and create a fire hazard even if you’ve never had a chimney fire. A standard brush sweep cannot see into the mortar joints or the spaces behind the brick. The camera can. We won’t tell you it’s safe until we’ve looked. Call (830) 251-4560 to schedule a Level 2 camera inspection.
The NFPA standard says once a year, regardless of how often you burn. In Aldine’s humid climate, even a fireplace that sits unused most of the year can develop problems: creosote hardens into a glaze, mortar absorbs moisture, and a musty smell sets in. The annual sweep is also an opportunity to check the cap, crown, and flashing before a small problem becomes a big one. If you only burn occasionally, you may not need a deep sweep every year, but you need an inspection. Call (830) 251-4560 and we’ll be honest about what you need.
Third-degree creosote is a hardened, tar-like glaze that forms when a chimney burns at low temperatures or when a fireplace is used infrequently in a humid climate like Aldine’s. It cannot be removed with a standard brush and it is the most fuel-packed form of creosote. The fix depends on what the camera shows. In many Aldine homes, the solution is a HeatShield resurfacing treatment that chemically breaks down the glaze, or, where the creosote has penetrated the brick, a new stainless liner. Let us show you the camera footage and then decide.
We can, but we won’t recommend it. The cap is the first line of defense, but when it’s missing, water has already been entering the flue for some time. We need to know whether the water damaged the liner, the damper, or the smoke chamber before we put a new cap on top. In Aldine’s wet, humid climate, a missing cap that’s been exposed for a season or two often means more than just a cap. The inspection is the same visit, the same call, and you’re not obligated to do any additional work. Call (830) 251-4560 and we’ll set it up.
No, and we don’t pretend to. Every repair starts with a camera inspection and a written quote, and we book that inspection for the next available slot. Once we’ve seen the chimney, most repairs, including cap replacement and flashing work, are completed the same day. For a liner installation or masonry rebuild, we’ll schedule the work for the next available date. The right way to handle an Aldine chimney is to look first, then quote, then fix. That’s the Flint process and it’s what the 365-Day Done Right Promise covers. Call (830) 251-4560 to book your inspection.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Aldine since 2002 as part of the Garrison Partners family of independently owned chimney service companies.