Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Phoenix
Chimney repair in Phoenix typically runs $350 – $2,800 depending on what’s actually failing, and most jobs are done in one visit once we’ve put eyes on the problem. We serve the whole metro: Arcadia, Ahwatukee, Desert Ridge, Moon Valley, Maryvale, and every neighborhood in between. If you’ve got a cracked crown, spalling brick, a rusted damper, or a flue that won’t draft, call (830) 251-4560 and we’ll give you a flat written price before any work starts.
Hank Delano runs our Phoenix crew, and he’s the first to tell you: this city’s heat does things to chimneys that other markets never see. The way mortar degrades here is specific. The way creosote bakes on here is specific. Getting the right diagnosis means knowing how Phoenix homes behave, not just how chimneys work in general.
Why Flint Chimney Sweep Is Phoenix’s Preferred Chimney Repair Company
We’ve worked on chimneys across Phoenix since Flint Chimney Sweep opened in 2002 as part of the Garrison Partners family. That means our techs know the difference between a 1920s bungalow chimney near Encanto and a 1990s tract home stack in Laveen. The brick, the mortar type, the liner condition: all different, and all require a different hand.
Every call to our Phoenix office puts a uniformed, background-checked technician at your door inside the window we give you. No subcontractors. No mystery workers. The same trade brands we use – HeatShield, Gelco, Olympia Chimney, Famco – are stocked locally so we don’t lose a day waiting on a liner or a counter-flashing kit to ship in.
The real reason Phoenix homeowners stick with us: every repair gets a written price before a single tool comes off the truck, and every job carries our 365-Day Done Right Promise. That’s a full-year written guarantee. If a covered repair fails, we come back and fix it at no charge. That’s not a slogan. It’s the Garrison Standard, and it applies on every chimney we touch in this city.
Chimney Liner Installation in Phoenix
Chimney Liner Installation in Phoenix means replacing or resurfacing the inner channel that carries smoke and exhaust safely out of your house, and it’s one of the most common repairs we do here because central Phoenix homes built in the 1940s and 1950s often never had a proper liner installed in the first place. A missing or cracked liner lets heat and carbon monoxide reach wood framing. It’s the difference between a safe fireplace and a structure fire waiting for the right conditions.
We use HeatShield’s cerfractory resurfacing system and DuraFlex stainless steel liners depending on the flue’s condition and the appliance it serves. Both are named on your written quote so you know exactly what material goes in. A standard liner installation in Phoenix runs $1,800 – $3,200 for a single-story home depending on flue height and access.
Cerfractory Resurfacing
This is a poured, cement-like material that bonds to the inside of a damaged clay tile liner. It seals cracks and gaps without tearing out the original flue. Shorter install time than a full stainless liner, and often the right call on a Phoenix home with minor spalling but an otherwise sound chimney.
Stainless Steel Liner
For flues that are too far gone to resurface, a DuraFlex stainless liner is the answer. It’s independently certified for solid fuel applications, including wood-burning fireplaces common in the older Phoenix housing stock around Melrose and Alhambra. We specify the gauge and diameter on your estimate.
Chimney Flashing Repair in Phoenix
Chimney Flashing Repair in Phoenix addresses the metal strips that seal the joint where your chimney meets the roof, and in this city the monsoons make flashing a wear item. Phoenix doesn’t get rain often, but when it does, it arrives as short, violent downpours. Aged flashing lets that water behind the masonry, into the attic, and down into the smoke chamber.
We replace rusted or lifted flashing with new step flashing and counter-flashing cut to fit the roof’s pitch, then seal the assembly with a Gelco system rated for decades of UV exposure – a big deal in Phoenix where the sun breaks down sealants faster than anywhere else in the country. A typical flashing repair on a single chimney runs $450 – $950. If the flashing failed because the chimney crown deteriorated, we’ll tell you and write both fixes into one quote.
Step Flashing and Counter-Flashing
Step flashing is woven under each course of shingles. Counter-flashing is cut into the brick mortar joint above it. Both are required for a leak-proof seal. Skipping either one means the repair lasts one season and you’re back to square one after the first July storm.
Monsoon Leak Testing
Before we call a flashing repair done, we run water over the entire chimney-to-roof transition and watch for intrusion. It’s the only way to confirm the leak is actually sealed. You get a photo report showing the new flashing in place and the dry interior.
Trusted Brands We Service in Phoenix
We work with professional-grade chimney materials because the warranty isn’t worth anything if the product fails in three years under Phoenix’s sun load. That’s why our Phoenix trucks stock HeatShield cerfractory, Gelco counter-flashing kits, and Olympia Chimney and Famco components. When we quote your repair, we name the exact material on the page. You can look it up yourself, check the manufacturer’s data sheet, and know you’re not getting a generic substitute. Phoenix homes we service in Ahwatukee, Moon Valley, and everywhere else get the same materials, the same written price, and the same one-year guarantee.
Common Chimney Repair Problems We See in Phoenix Homes
- Cracked and spalling mortar crowns. Phoenix’s temperature swings from 110°F summer afternoons to 40°F winter nights expand and contract mortar repeatedly. Crowns crack, water gets in, and the damage compounds. Most crowns we see need a proper overhang cast, not just a smear of cement.
- Third-degree creosote buildup misread as soot. The dry heat here bakes creosote into a hard, brittle glaze that looks thin but is far more dangerous than the fluffy stuff. A quick visual check from the firebox misses it. This is exactly why every repair job starts with a camera inspection.
- Missing or deteriorated flue liners in 1950s ranch houses. Original brick chimneys in neighborhoods across central Phoenix were often built without a modern flue liner. Heat, carbon monoxide, and creosote all move through that bare masonry. A Level 2 inspection catches it before you need a full rebuild.
- Rusted chase covers on prefab chimneys. Metal chase tops on newer homes across north Phoenix and Desert Ridge rust through, letting monsoon rain drip directly onto the smoke chamber and damper. It’s often misdiagnosed as a draft issue when the real culprit is a $300 cover.
Pricing for Chimney Repair in Phoenix, AZ
Here are the honest ranges for common repairs in Phoenix: a standard chimney sweep and camera inspection runs $189 – $279. Mortar repointing for a typical central Phoenix brick chimney runs $550 – $1,100. Flashing repair runs $450 – $950. A chimney crown recast runs $750 – $1,400. Full liner installation runs $1,800 – $3,200. A partial chimney rebuilding job, if the brick is beyond saving, starts around $2,800.
What moves the number is access (one story vs. two), flue height, and the extent of the masonry damage. You won’t get a vague “it depends” from us. You’ll get a written line-item quote. Call (830) 251-4560 and we’ll schedule the camera inspection that gives you the real number.
We Also Serve Cities Near Phoenix
Our crews handle Chimney Repair across the Valley: Tempe, Scottsdale, Mesa, Glendale, Chandler, and Peoria. If you’re outside that radius, call and ask – our Phoenix dispatch will tell you straight if we service your street.
Serving Phoenix, AZ - Our Local Coverage Area
We’re based in the Phoenix area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Phoenix
Yes, once a year if you use the fireplace at all. Phoenix’s dry heat bakes even small amounts of creosote into a brittle glaze that can ignite at a lower temperature than the soft stuff. A yearly Chimney Inspection - Phoenix with a camera takes about an hour and catches cracks, liner gaps, and water intrusion while they’re cheap to fix. If you truly never light a fire, you can stretch it to every two years. Call (830) 251-4560 to book the inspection that tells you where you stand.
You can’t tell from the firebox, and that’s the point. Third-degree creosote here looks like a thin, shiny, flaky glaze on the flue liner. It reads as “not that bad” to the eye, but it’s the most concentrated fuel in your chimney. The only reliable way to confirm it is a camera run up the flue. If you haven’t had a sweep in two or more years and you burn wood regularly, assume it’s there until a photo proves otherwise. Book a sweep and camera check at (830) 251-4560.
Yes, in most Phoenix homes the crown can be recast without touching the brick below. We remove the old cracked mortar, cast a new crown with a proper overhang and drip edge, and open the flue tile to the correct height. That runs $750 – $1,400. Only if the underlying brick courses are shifting or spalled past saving would a partial rebuild be needed, and you’ll see why in the photo report before you approve anything.
It means removing the old step flashing and counter-flashing, cutting new metal to match the roof slope, setting it properly under shingles and into the mortar joint, and sealing everything with a UV-stable product. On a Phoenix home, we test the finished job with a water run to confirm no leak paths. You’ll get before-and-after photos. Figure $450 – $950 for a single chimney. Estimates are free, so call (830) 251-4560 if you’ve noticed water staining near the ceiling.
It depends on what the repair is. A cracked crown left through the monsoon season will let water in whether you burn or not, and that water expands and contracts inside the masonry, making the repair larger by next spring. A small flashing leak becomes a rotted chase. A missing liner, if you never burn, is not an immediate hazard – but it is a structural liability when moisture works its way through. The right move is a camera inspection that gives you a straight answer on what can wait and what can’t. Call (830) 251-4560 and we’ll give you that answer before you spend a dollar.
Flint Chimney Sweep repairs chimneys all over Phoenix: Arcadia, Ahwatukee, Moon Valley, Maryvale, Desert Ridge, and every stop between. On a 1950s ranch house near 7th Street and Bethany Home Road, our tech found a spalling chimney crown and a rusted chase cover that was letting monsoon rain drip onto the smoke chamber. We used HeatShield to resurface the damaged flue liner, replaced the crown with a proper overhang, and sealed the flashing with a new Gelco counter-flashing kit, then sent the homeowner a photo report showing the before-and-after. The draft improved immediately, and the damper now closes fully for the first time in years. That’s the standard we hold on every Phoenix job, and it’s written into the guarantee you get before work begins.
Call (830) 251-4560 for a free estimate on your chimney repair. A live person answers, day or night. We’ll give you a flat written price and a straight answer on what needs fixing now and what can wait until next season.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Phoenix since 2002.