Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Phoenix, AZ
Flint Chimney Sweep handles chimney cleaning, inspection, and repair for homeowners across Phoenix. Most of the chimneys we service here are wood-burning fireplaces built into single-family homes from the 1970s through the early 2000s, and the desert climate creates a specific set of conditions: dry creosote, fine dust buildup, and flue damage from sudden temperature swings between hot days and cold desert nights. If you need a chimney company in Phoenix that puts a written price in your hand before any work starts, call (830) 251-4560. Our three core services each have their own Phoenix page, linked below.
Why Phoenix Homes Are Different
Phoenix chimneys don’t fail the way chimneys do in wetter climates. We rarely open a flue here and find the sticky, tar-like creosote that comes from burning green wood in humid conditions. What we find instead is powder-dry creosote that can ignite fast, plus a fine silt that desert winds push down through uncapped flues. Homes in Arcadia, Ahwatukee, and the Biltmore area tend to have older masonry fireplaces with clay tile liners that crack under repeated thermal stress, and those cracks are exactly where heat and carbon monoxide find a way into the wall cavity. Mountain-adjacent neighborhoods like Laveen and parts of North Phoenix see more wind-driven debris than centrally located homes, which means caps and screens take a real beating. Any newer build in a master-planned community will likely have a factory-built fireplace and a chase cover that needs its own inspection schedule. Hank Delano and our technicians treat every Phoenix job as its own documentation project: conditions, findings, and the written price all go to the homeowner before the first tool comes off the truck.
Our Main Phoenix Services
Most Phoenix homeowners call us for one of two reasons: they want the chimney cleaned and checked before burning season, or they’ve been told by an inspector or insurance company that something needs repair. Here’s how each service works in Phoenix, with a dedicated page for the full details.
Chimney Sweep in Phoenix
A sweep in Phoenix means removing the dry creosote and wind-blown silt that build up inside the flue during the off-season. We use professional-grade brushes sized to your flue, run a full vacuum setup to keep dust out of the house, and document what came out. Homes that burn primarily soft woods like pine, common in northern Arizona firewood deliveries, tend to build creosote faster than homeowners expect. Chimney Sweep in Phoenix covers pricing, what to expect, and how to prepare for the visit.

Chimney Inspection in Phoenix
An inspection in Phoenix should include a camera run through the flue, not just a visual look from the firebox. Cracked clay liners are common in homes built before 1990, and the only way to document that clearly is with video or still images you can see yourself. We inspect the firebox, damper, flue, cap, chase cover, and surrounding masonry, then put findings in writing with photos. A camera inspection is included in our standard sweep appointment. Chimney Inspection in Phoenix explains the three levels of inspection and when each one applies.

Chimney Repair in Phoenix
Repairs in Phoenix range from replacing a rusted damper to full flue relining, which is replacing the inner liner that channels smoke safely out of the house. We work with HeatShield and Gelco ceramic lining systems, plus stainless steel liners from Olympia Chimney and Famco where the job calls for it. Every repair gets a written scope and a written guarantee under The Garrison Standard, the operating code followed by every Garrison Partners location. If a covered repair fails within a year, we return at no charge. Chimney Repair in Phoenix has the repair types, pricing, and guarantee details.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Phoenix
We service all major chimney and fireplace brands in the Phoenix market. On most jobs we’re working with HeatShield and Gelco for liner repair, Olympia Chimney for caps and termination components, and Famco for dampers and related parts. We keep common replacement components stocked for faster turnaround on repair calls. See our brands for the full list of what we service and install.
Pricing for Chimney Company in Phoenix, AZ
Every price below is a typical range for the Phoenix area. The written price you approve before work starts is the price on the invoice, and it includes the full scope in writing under The Garrison Standard.
| Service | Typical Range in Phoenix |
|---|---|
| Standard chimney sweep and inspection | $180 – $340 |
| Level 2 camera inspection (standalone) | $300 – $600 |
| Level 3 inspection (after chimney fire or structural concern) | $800 – $2,500 |
| Flue relining with stainless steel | $1,800 – $4,500 |
| HeatShield cerfractory liner repair | $1,200 – $3,500 |
| Chimney cap replacement | $200 – $700 |
| Damper replacement | $250 – $650 |
| Firebox masonry repair | $400 – $1,800 |
| Chase cover fabrication | $600 – $1,500 |
| Full chimney rebuild (top section) | $2,500 – $7,500 |
Prices in Phoenix push toward the higher end when a chimney has cracked liner tiles that require more than a patch, when a chase cover needs custom fabrication, or when wind-driven debris has damaged cap and crown together. We never start work without a written price in your hand, and we never change that price at the door.
Neighborhoods We Serve in Phoenix
Our Phoenix crews cover the full metro during standard appointment windows, typically Monday through Saturday. Response time ranges from same-week to ten business days depending on season, and we always confirm a two-hour arrival window in advance.
- Arcadia
- Ahwatukee
- Biltmore
- North Phoenix
- Laveen
Service Area – Cities Near Phoenix
Our Phoenix office coordinates dispatch for the full metro area. Homeowners in Tempe, Scottsdale, Mesa, Glendale, Chandler, and Peoria can call the same number and get scheduled from the same Phoenix-based dispatch team. Every appointment, regardless of which side of the metro it’s on, gets the same written-price guarantee and the same background-checked technicians.
Serving Phoenix, AZ - Our Local Coverage Area
We’re based in the Phoenix area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Phoenix
Most routine repairs like cap replacement or damper work do not require a city permit. Structural work such as a full rebuild or major masonry repair may need approval depending on scope and location. We tell you at the estimate stage if your job requires a permit, and we handle the application if so. Call (830) 251-4560 for specifics on your repair.
Once a year is the standard, even if you only burn a few fires a season. Phoenix’s dry climate creosote is more prone to ignition than the sticky creosote found in humid areas, and wind-blown silt builds up even in unused fireplaces. An annual sweep and inspection is the cheapest way to catch liner cracks early. Call (830) 251-4560 to schedule.
Yes. Our Phoenix-based dispatch covers the full metro area, including Tempe, Mesa, Scottsdale, Glendale, Chandler, and Peoria. Every appointment gets a two-hour arrival window, a background-checked technician, and a written price before work begins. Call (830) 251-4560 to check availability for your neighborhood.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Phoenix Customers Say
"Smoky fireplace for years. Turned out the cap was clogged. Swapped it and the smoke is gone."
- Brandon T."Rebuilt the crown on our chimney where water had been getting in. Neat masonry and a fair price."
- Eddie J."Very respectful, wore boot covers, laid drop cloths. Left no soot."
- Jan S.





Before
After
Before
After
Before
After