Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Sweep Across Clovis
A standard chimney sweep for a wood-burning fireplace in Clovis runs about $175 – $275, depending on what we find once the camera goes up. That price covers the full sweep, the inspection, and the photo report we send you before we leave. If you’re off Temperance Avenue, north of Herndon, or down by the Loma Vista neighborhoods, we know the homes and we know what the Valley air does to them. Call (830) 251-4560 and we’ll give you a written price before any work starts.
Why Flint Chimney Sweep Is Clovis’s Preferred Chimney Sweep Company
Clovis homeowners call us because the number they get is the number they pay. That’s not a slogan. It’s how Garrison Partners has run chimney service operations since 2002, and it’s how we operate in Clovis. Every job, from a basic sweep to a full repair, gets a written price before the first tool comes off the truck. The crews are background-checked, uniformed, and they run under The Garrison Standard: show up in the window we give you, do the work, document it, stand behind it.
A lot of the homes we service in Clovis were built in the 1980s and 1990s, which means masonry fireplaces with clay flue liners that have now gone through 30 or 40 Valley summers. We know what that does. We also know the difference between a chimney that needs work now and one that can wait another season, because we put a camera up there and show you what we see. The photo report makes the call for us, not a sales script.
Chimney Sweep Services in Clovis
Chimney Sweep Services in Clovis are for homeowners whose fireplaces see regular use from November through February. The job means removing creosote, soot, and debris from the flue liner, smoke chamber, and firebox with rotary rods and a HEPA vacuum. In Clovis, we also check the chimney crown, cap, and flashing during every sweep, because the dry Central Valley climate cracks masonry faster than most people expect. A sweep without an inspection is a half job.
Creosote and Soot Removal
Creosote is the tar-like residue that forms when wood smoke condenses on the cooler walls of the flue. In Clovis, almond and walnut orchard wood gets burned often, and it produces a heavier, stickier creosote than seasoned oak or pine. We remove first- and second-degree creosote with rotary brushes and send the residue out with a vacuum that never lets dust into your living room.
Annual Sweep and Fireplace Cleaning
If you burn a cord or more of wood each season around the Harlan Ranch or Buchanan High areas, once a year is the right cadence. The sweep takes 45 to 90 minutes for a standard single-flue chimney. We lay drop cloths, run the rods through the flue from inside, and clean the firebox, damper, and glass doors before we finish.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Cleaning in Clovis
Chimney Cleaning in Clovis is what most people call a sweep, but the job is broader than just brushing the flue. A proper cleaning includes the smoke chamber, damper assembly, firebox, and the top of the chimney capping. In Clovis, we also clean out what the Valley gives us: dust, soot film, and the occasional bird’s nest or wasp carcass from a screen-less cap. We do not run a brush up and call it done.
Fireplace Cleaning
A fireplace cleaning removes built-up ash, soot stains on firebrick, and the fine carbon film that clings to glass doors after a winter of use. We use a HEPA vacuum designed for fine soot, not a shop vac that would exhaust ash back into the room. The firebox gets inspected at the same time for cracked refractory panels or a warped damper.
Level 1 and Level 2 Inspection
During a Level 1 inspection, which is part of every sweep, we check the readily accessible parts of the chimney: the flue liner, damper, cap, and the exterior masonry we can reach from the ground or the roof. A Level 2 inspection is more involved and is what we recommend when something changes: you buy a home in Clovis, you switch from gas logs back to wood, or a storm or earthquake shifted the masonry. We run the camera through the full flue and document everything in photos.
Trusted Brands We Service in Clovis
When a Clovis chimney needs parts, we do not guess at what fits. We spec by job, using DuraFlex liners for relining, Famco caps and dampers for top-end replacements, and Copperfield chimney components where the original manufacturer part is the right call. Because Flint Chimney Sweep operates as part of Garrison Partners, we have direct supply access to these brands, which means shorter waits on parts for Clovis jobs than a one-truck shop working through a distributor. If a cap is rusted or a damper is seized, we can usually quote the repair on the spot and schedule it without a second visit.
Common Chimney Sweep Problems We See in Clovis Homes
- Third-degree creosote glaze from orchard wood. Almond and walnut wood burns hot and leaves a hardened, glossy creosote that a standard wire brush skips right over. The only safe fix is chemical treatment followed by mechanical removal, or the chimney fires from not being swept at all.
- Cracked chimney crowns from dry heat. The Central Valley’s low humidity and 100-degree summers dry out masonry crowns, and once hairline cracks form, water gets in. In Clovis we see spalled brick and rusted dampers in fireplaces that are only 15 or 20 years old because the crown was never sealed.
- Brush-only sweeps leaving a false clean. A homeowner near Fowler Avenue called us after another company swept the chimney a month earlier. The camera showed third-degree glaze still coating the smoke chamber. A brush does not remove glaze, and no camera means no one ever knows.
- Missing or damaged chimney caps. Without a cap, Clovis gets birds trying to nest in flues during spring, and rain during the winter wet season runs straight down the liner and rusts the damper. We check the cap on every sweep and tell you plainly whether it needs replacement or just a resealing.
Pricing for Chimney Sweep in Clovis, CA
A standard chimney sweep in Clovis runs $175 – $275 for a single-flue, wood-burning fireplace with normal creosote buildup. If the flue has third-degree glaze, the price goes to $325 – $450 because we use chemical treatment before the rods go through. A Level 2 camera inspection is included with every sweep, but if you need one as a standalone service because you’re buying a home or switching fuels, it runs $150 – $250. Any repair gets its own written quote before work starts, and every repair carries our 365-Day Done Right Promise in writing. Call (830) 251-4560 for an exact number on your chimney.
We Also Serve Cities Near Clovis
Our crews cover the whole 93611, 93612, and 93619 area plus the surrounding Central Valley communities. If you’re in Clovis proper or out near Fresno, Sanger, Fowler, or Madera, the same written-price policy and the same 365-Day Done Right Promise applies. Our Chimney Sweep team is dispatched from the Fresno office and serves Clovis locally every week.
Serving Clovis, CA - Our Local Coverage Area
We’re based in the Clovis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Clovis
If you burn a cord of wood or more each season in Clovis, sweep it every year. Orchard wood from the almond and walnut groves around town produces heavier creosote than seasoned pine, and the residue builds up inside a single season. A fireplace that sees only occasional use can often go two years, but the inspection is what tells you that safely. Call (830) 251-4560 and we’ll give you a straight answer based on what your flue actually looks like.
Third-degree creosote is a hardened, glossy tar that forms when the flue temperature gets hot enough to bake earlier creosote deposits into a glaze. A wire brush slides over it without removing it. The only reliable removal in Clovis is a chemical treatment that breaks down the glaze, followed by a rotary sweep, and in severe cases a re-inspection to confirm the liner is clean. Skipping this step leaves the exact conditions that cause chimney fires.
Yes, on every single sweep. We check the crown for cracks and spalling, the cap for rust or missing screen mesh, and the flashing where the chimney meets the roofline. Clovis’s dry summers and rare but hard winter rains make crown and flashing failures common, and catching a hairline crack costs a fraction of what a rusted damper replacement or water-damaged flue liner costs.
We can tell you what we see, not what we guess. After the sweep, we show you the camera footage and photo report, and we give you a plain answer: safe to burn now, or needs work before you light another fire. If the recommendation is a repair, you get a written price and you get the final call. Nothing is recommended without camera evidence you can see for yourself.
We install and service DuraFlex chimney liners, Famco caps and dampers, and Copperfield chimney components. These are professional-grade products, not big-box imports, and they carry manufacturer warranties in addition to our own written guarantee. If a Famco cap is what your chimney needs, that is what we quote, not a generic substitute chosen to pad margin.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Clovis as part of the Garrison Partners family since 2002.