Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Sweep Across Colorado Springs
A chimney sweep in Colorado Springs typically costs between $189 and $329 for a standard open fireplace, and most appointments are scheduled within three to five business days during peak fall season. We don’t promise same-day service, because a proper sweep involves more than running a brush up the flue. What we do promise is a written price before any work starts, a camera inspection with a photo report, and a full-year guarantee on any repair we make. If you live in Colorado Springs and want a straight answer about your chimney, call (830) 251-4560.
Flint Chimney Sweep has served Colorado Springs homeowners since 2002 as part of the Garrison Partners family of chimney service companies. We know the housing stock here: mid-century ranches in Skyway, split-levels in Briargate, newer builds in Banning Lewis Ranch. Every structure ages differently, and Colorado Springs weather is harder on chimneys than most people realize. That’s why we put every scope of work in writing before a single tool comes off the truck.
Why Flint Chimney Sweep Is Colorado Springs’s Preferred Chimney Sweep Company
Colorado Springs homeowners call us because we run on a documented code, The Garrison Standard, that governs every job from dispatch to final invoicing. No vague estimates. No price changes at the door. No guessing about whether the work was actually done. Our Chimney Sweep team arrives in uniform, background-checked, and inside the appointment window we give you.
Every sweep includes a camera inspection of the flue and firebox, and you get the photos. If you’re told you need a liner replacement or masonry repair, we show you the image that proves it. Hank Delano, who leads our company, put this protocol in place because too many homeowners get quoted thousands of dollars for work they can’t verify. That doesn’t happen with us.
Chimney Services in Colorado Springs
Chimney Services in Colorado Springs cover the full scope of keeping a wood-burning fireplace or stove safe and functional: sweeping, creosote removal, soot removal, damper replacement, flue relining, crown repair, and flashing work. A standard annual sweep for an open fireplace in Colorado Springs runs $189 to $249. Homes with heavy creosote accumulation, glazed third-degree creosote, or a wood stove insert will land closer to the $280 to $329 range. Every quote is delivered in writing before we begin.
Annual Sweep and Creosote Removal
Creosote is the byproduct of burning wood: a tar-like substance that condenses on the flue walls. In Colorado Springs, the dry, windy climate causes creosote to flake and accumulate in bands above the damper, which is why a clean-looking firebox tells you almost nothing about the condition of the flue. We remove creosote with rotary brushes and HEPA-filtered vacuums, then document the interior with a camera.
Fireplace Cleaning and Soot Removal
Fireplace cleaning in Colorado Springs covers the firebox, damper assembly, smoke shelf, and the visible portion of the flue. Soot removal from the firebox prevents acidic buildup from corroding masonry and metal components. We also inspect the damper for rust and proper operation; a stuck or rusted damper alters draft and sends smoke into the living space.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Sweep Certified in Colorado Springs
Chimney Sweep Certified service in Colorado Springs means your sweep follows NFPA 211 standards and is trained to identify hazards beyond creosote buildup. Every job our team performs is documented by camera, and every repair is covered under our 365-Day Done Right Promise: if a covered repair fails within one year from the service date, we return at no charge. That’s a written guarantee, not a handshake.
Level 1 and Level 2 Inspections
A Level 1 inspection is a visual check of all accessible chimney components. It’s the standard annual inspection for a home that hasn’t changed its heating system or experienced a chimney fire. A Level 2 inspection adds a video scan of the flue interior and is required when you buy or sell a home in Colorado Springs, after a chimney fire, or when you change the fuel type or appliance.
Flue Relining and Damper Replacement
Flue relining (replacing the inner liner that channels smoke safely out of the house) is common in older Colorado Springs homes with original clay tile liners. Freeze-thaw cycles crack these tiles over time, and a cracked liner allows heat and carbon monoxide to reach combustible framing. We specify professional-grade liners from DuraFlex and HeatShield, chosen by job requirements, not margin.
Trusted Brands We Service in Colorado Springs
We work with professional-grade chimney products because Colorado Springs homeowners deserve parts that last through aggressive weather cycles. Our technicians install and service components from Famco, Copperfield, DuraFlex, and HeatShield. That means dampers, caps, liners, and chase covers arrive from suppliers with documented engineering standards. We stock common replacement parts locally for Colorado Springs jobs, which keeps turnaround tight when your damper is rusted or your cap has blown off in a windstorm.
Common Chimney Sweep Problems We See in Colorado Springs Homes
- Spalled brick and cracked crowns. Colorado Springs sits at 6,035 feet, and the Pikes Peak region’s intense UV, wind, and freeze-thaw cycles spall masonry faster than in lower-elevation Front Range cities. A crown that goes unrepaired lets water into the chimney structure, and by the time you see cracks in the attic or ceiling, the repair is far more expensive.
- Unseen creosote above the damper. Dry, windy conditions cause creosote to flake and lodge in bands where you can’t see it. A clean firebox means nothing. Our camera inspection shows what’s actually inside the flue.
- Rusted dampers and chimney caps. Colorado Springs gets wind, snow, and dry high-desert air in rotation. Metal chimney components rust faster here than in more humid or wind-sheltered regions. We replaced a Gelco damper on a 1960s ranch in Skyway this season that had rusted shut from years of wind-driven moisture.
- Third-degree creosote glaze. This hardened, tar-like coating is the residue of a chimney fire or repeated hot burns. It’s extremely difficult to remove with standard brushes and represents a serious fire risk. If you’ve had a fire in the chimney, you need a Level 2 inspection before you burn again.
Pricing for Chimney Sweep in Colorado Springs, CO
A standard chimney sweep and Level 1 inspection for an open fireplace in Colorado Springs runs $189 to $249. Expect $260 to $329 for a wood stove insert, heavy creosote accumulation, or glazed third-degree creosote requiring chemical treatment or rotor cleaning. A Level 2 camera inspection (required after a chimney fire or before a home sale) adds $150 to $225. Damper replacement with a Gelco unit typically lands between $285 and $390 including parts and labor. Flue relining with DuraFlex runs $1,400 to $3,200 depending on flue height and diameter. All repairs carry the 365-Day Done Right Promise, and every price is on paper before we start. Call (830) 251-4560 for a firm quote.
We Also Serve Cities Near Colorado Springs
Flint Chimney Sweep serves homeowners throughout the southern Front Range. Our Colorado Springs crews also schedule sweeps and inspections in Denver, Boulder, Greeley, and Fort Collins. Dispatch and scheduling are coordinated from our Denver office, and the same written-pricing protocol and 365-Day Done Right Promise apply on every job, in every city.
Serving Colorado Springs, CO - Our Local Coverage Area
We’re based in the Colorado Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Colorado Springs
The National Fire Protection Association standard, NFPA 211, says chimneys should be inspected annually and swept when creosote reaches 1/8 inch of accumulation. In Colorado Springs, where dry wood burns hot and wind drives moisture into masonry, an annual sweep is the practical minimum for any wood-burning fireplace in regular use. Homes that burn soft woods like pine or aspen, which are common across the Pikes Peak region, accumulate creosote faster and may need a mid-season sweep. If you’re unsure, call (830) 251-4560 and we’ll inspect before we recommend any work.
First-degree creosote is a fine, sooty powder that brushes away easily. Second-degree creosote is flaky and crusty, often forming bands or scales, and requires rotary brushes to remove fully. Third-degree creosote is a hard, shiny, tar-like glaze that forms when temperatures exceed roughly 1,000 degrees Fahrenheit, often from a chimney fire or prolonged hot burning. Third-degree creosote cannot be removed with standard brushes and typically requires chemical treatment, rotary chain removal, or flue relining depending on the liner’s condition. If a camera inspection reveals glaze, we show you the image and explain your options before any recommendation.
No. We don’t promise same-day service because a proper sweep and inspection takes time, and rushing the process would mean skimping on the camera report you’re paying for. Most Colorado Springs appointments are scheduled within three to five business days during fall peak. If you have a suspected chimney fire or structural damage, call (830) 251-4560 immediately and we’ll advise you on what to do, including whether you should avoid using the fireplace until we arrive.
A Level 2 inspection includes everything in a Level 1 visual check plus a video scan of the flue interior using a camera system. You need one when you’re buying or selling a home in Colorado Springs, after a chimney fire, when you change your heating appliance or fuel type, or after an event like a lightning strike or significant seismic activity that could damage the structure. The camera footage goes into your file and you receive photos showing exactly what the flue looks like inside. Expect to pay $150 to $225 for a Level 2 inspection in our service area.
Colorado Springs weather is uniquely hard on chimneys: six-thousand-foot elevation means intense ultraviolet radiation, frequent high winds, and dozens of freeze-thaw cycles each winter. Water enters small cracks, freezes, expands, and widens the crack; UV breaks down sealants and crown coatings faster than in lower-elevation cities like Denver or Boulder. The Pikes Peak region’s spring windstorms routinely tear off lightweight chimney caps and send debris into flues. That’s why we recommend an annual NFPA 211 inspection here, even if you don’t burn often. If work can safely wait, we’ll say so. Call (830) 251-4560 for an honest assessment.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Colorado Springs since 2002.