Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Company in Edgewood, WA
Chimney cleaning in Edgewood typically costs between $189 and $289 for a standard sweep, with most homeowners scheduling service before the October burning season. Edgewood’s mix of 1970s ramblers, split-levels, and newer North Hill builds means chimneys here face a specific set of conditions: wet winters, cedar-heavy lots, and a local housing stock where original masonry fireplaces sit alongside newer prefabricated units. We’re the chimney company that puts the price in writing before any work begins, so the number you approve is the number on the invoice. Call (830) 251-4560 to schedule.
Why Edgewood Homes Are Different
Edgewood sits on a plateau between the Puyallup and Green River valleys, which means two things for chimneys. First, the elevation and tree cover hold moisture longer than nearby Tacoma or Puyallup. Damp conditions accelerate creosote buildup inside flues, and moss on the exterior cap is common enough that we check cap screens on nearly every Edgewood job. Second, many homes along Meridian Avenue and the older streets off Jovita Boulevard were built in the 1960s and 1970s with clay tile liners. Those liners crack after decades of heating and cooling cycles, and once cracked, they stop protecting the surrounding framing the way they should.
Edgewood’s lots also tend to be larger and more heavily wooded than surrounding suburbs, especially in the neighborhoods east of Highway 167. Cedar and fir needles land on roofs, collect in gutters, and end up in chimney chase tops. When we inspect an Edgewood chimney, we’re not just looking at the flue. We’re checking whether the surrounding roofline is feeding debris toward the cap. That kind of site-specific observation changes what maintenance a homeowner actually needs.
Our Main Edgewood Services
The three services Edgewood homeowners call about most are routine sweeps, inspections tied to real estate transactions, and repairs to masonry and liners. Each has its own Edgewood page with pricing and detail.
Chimney Sweep in Edgewood
A standard sweep here removes the creosote and soot that build up from burning wood in a damp climate. In Edgewood, we routinely find glazed creosote in chimneys that only get used a few months a year, because the moisture in the air keeps deposits sticky long after the fire is out. Our technicians run brushes through the full flue length, clean the smoke shelf and damper area, and leave the firebox clean. Full detail on scope and pricing is on the Chimney Sweep in Edgewood page.
Chimney Inspection in Edgewood
When a home changes hands in Edgewood, the buyer’s inspector usually flags the chimney, and for good reason. Cracked clay liners and rusted dampers are common in homes built in the 1970s and 1980s. We perform Level 1 and Level 2 inspections using a camera to document what’s actually inside the flue, then hand you a written report with photos. Nothing is ever recommended without visual evidence you can see for yourself. That’s the standard we hold for every Chimney Inspection in Edgewood call.
Chimney Repair in Edgewood
Repairs in Edgewood often involve water, because our winters are wet and our chimneys sit under tree cover. We see rusted damper assemblies, spalling brick on exposed shoulders, and cracked crown mortar. When repair is needed, we specify professional-grade materials like DuraFlex and HeatShield, and every repair carries the 365-Day Done Right Promise in writing. That means a full year of coverage, with a free return visit if a covered repair fails. Details are on the Chimney Repair in Edgewood page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Edgewood
We work on and install products from brands chosen for how they hold up in the Pacific Northwest. In Edgewood, that most often means DuraFlex liners, Olympia Chimney caps, and Copperfield components. Parts are stocked at our Seattle dispatch hub, so most Edgewood repairs don’t wait on a long order cycle. See our brands for the full list.
Pricing for Chimney Company in Edgewood, WA
| Service | Typical range in Edgewood |
|---|---|
| Chimney sweep (standard, no major issues) | $189 – $289 |
| Chimney sweep with heavy creosote removal | $289 – $389 |
| Level 1 inspection (visual, no special access) | $129 – $219 |
| Level 2 inspection (camera, for real estate or after damage) | $299 – $499 |
| Smoke chamber repair (parging, minor masonry) | $350 – $800 |
| Damper replacement | $250 – $650 |
| Chimney cap replacement (standard cap) | $250 – $550 |
| Crown repair (minor sealing / resurfacing) | $400 – $900 |
| Flue relining with DuraFlex | $3,200 – $7,000 |
| Masonry repointing (partial, typical chimney) | $800 – $2,500 |
What pushes a price up in Edgewood is access and moisture. Steep lots off North Hill or older homes with tight chase designs take more time to work safely. Roof pitch matters too, and so does whether the chimney sits close to power lines. Whatever the number, it comes to you in writing before any work starts. That’s not a courtesy. It’s how we operate.
Neighborhoods We Serve in Edgewood
Our crews cover all of Edgewood, from the established streets near Jovita Boulevard to the newer developments rising east of Highway 167. Typical response for a scheduled Edgewood visit runs within a few days, depending on the season and what the job involves.
- North Hill
- South Hill border neighborhoods
- Areas along Meridian Avenue
- Neighborhoods east of Highway 167
- The Jovita area
Service Area – Cities Near Edgewood
Edgewood sits at the eastern edge of the South Sound, and our crews also cover nearby cities including Tacoma, WA and Seattle, WA. For homeowners further out, we serve Vancouver, WA and Spokane, WA through the same Garrison Standard process: documented price, written guarantee, and a crew that arrives inside the window given.
Serving Edgewood, WA - Our Local Coverage Area
We’re based in the Edgewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Edgewood
Scheduling for Edgewood typically lands within a few business days in spring and summer. Fall is busier, and we plan visits around the weeks before burning season starts. Call (830) 251-4560 to lock in a date before the rush.
Routine sweeps and inspections don’t require permits. Major liner replacements or structural masonry work can, and Edgewood follows Pierce County building codes. We’ll tell you plainly if a permit applies to your job before any work begins.
If it’s been more than a year since the chimney was last cleaned, start with a sweep. If the home is new to you or you suspect damage, start with an inspection. Either way, the final report tells you what needs doing now and what can safely wait.
Call (830) 251-4560 for a free estimate on chimney work in Edgewood, WA. We’ll give you a written price before any work starts, and if a repair fails within a year, we return at no charge under the 365-Day Done Right Promise.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Edgewood Customers Say
"Chimney repair on loose bricks near the top. Tuckpointed it so it matches. Looks right."
- Rosa H."Direct, no nonsense, and polite. Exactly what I wanted."
- Tina W."Smoky fireplace for years. Turned out the cap was clogged. Swapped it and the smoke is gone."
- Brandon T.